Vibro-Meter CA202 144-202-000-215 Piezoelectric Accelerometer

CA202 piezoelectric accelerometer shine babban firikwensin girgiza masana'antu daga layin samfurin Vibro-Meter (yanzu wani ɓangare na Meggitt Group), ana amfani da shi sosai don saka idanu na girgizawa da gano kuskure a cikin injina daban-daban na juyawa, kayan wuta, da buƙatun yanayin masana'antu. Model 144-202-000-215 shine daidaitaccen sigar da aka sanye da kebul na haɗin mita 6, wanda ya dace da ayyukan saka idanu na rawar jiki a wuraren da ba fashewa (marasa haɗari).

Wannan firikwensin yana amfani da nau'in ma'aunin polycrystalline mai juzu'i tare da insulation na ciki da fitarwa na daban. Gidan da aka yi da bakin karfe austenitic kuma an haɗa shi da hermetically, yana samar da ingantaccen ƙarfin injin, juriya na lalata, da kwanciyar hankali na dogon lokaci. Kebul ɗin haɗin gwiwar yana da kariya ta hannun hannun bakin karfe mai sassauƙa kuma an haɗa shi zuwa gidan firikwensin, yana samar da hatimi, taro mai tsauri wanda zai iya jure ƙaƙƙarfan gurɓataccen masana'antu kamar zafi, ruwa, tururi, mai, da yanayi mai cike da gishiri.

An ƙera CA202 don sa ido da auna girgiza masana'antu masu nauyi. Babban ƙarfinsa, faɗaɗa amsawar mita, faffadan zafin jiki mai aiki, da kyakkyawan rigakafin amo ya sa ya zama abin dogaro na gaba-gaba don sa ido kan yanayin kayan aikin masana'antu da tsarin kulawa.

---

2. Key Features da Fa'idodi

1. Babban Hankali: Yana ba da babban hankali na 100 pC/g don ɗaukar siginar girgiza mai rauni daidai.

2. Amsa Mita Faɗaɗi: Matsakaicin amsawa kewayo daga 0.5 Hz zuwa 6000 Hz, yana rufe mitar girgizar mafi yawan injinan masana'antu.

3. Kewayon Zazzabi Mai Faɗin Aiki: Yanayin zafin jiki na Sensor yana aiki daga -55°C zuwa +260°C, wanda ya dace da yanayi mai girma ko ƙananan zafin jiki.

4. Tsara Mai ƙarfi da Dorewa:

• Gidajen da aka yi da Austenitic Bakin Karfe (1.4441), wanda aka yi masa walda.

• Haɗin kebul tare da Bakin Karfe mai juriya mai zafi (1.4541) mai sassauƙa na kariya, walda da hatimi.

• Tsarin gabaɗaya yana da juriya ga danshi, ruwa, mai, feshin gishiri, kuma ya dace da yanayin masana'antu masu tsauri.

5. Kyakkyawan Halayen Wutar Lantarki:

• Ciki Case Insulation yadda ya kamata ya keɓe tsangwama madauki na ƙasa.

• Fitowar Cajin Banbanci yana ba da ƙaƙƙarfan ƙin yarda da amo na yanayin gama gari.

• Babban juriya na rufin ciki (≥ 10⁹ Ω).

6. Sauƙaƙan Shigarwa: Yana ba da daidaitattun ramukan hawa. Ba a buƙatar rufin lantarki na saman hawa.

7. Takaddun Takaddun Tsaro na Zaɓin: Baya ga daidaitaccen sigar, Ex ia (lafiya ta gaske) da Ex na (marasa haske) ƙwararrun nau'ikan takaddun shaida suna samuwa don amfani a cikin yanayi mai yuwuwar fashewar abubuwa (yankuna masu haɗari).

8. Dogarowar Dogon Zamani: Daidaitaccen calibrated a masana'anta. Ba a buƙatar daidaitawa na gaba a ƙarƙashin yanayin aiki na yau da kullun.

   
   

---

3. Yankunan Aikace-aikace

CA202 piezoelectric accelerometer an ƙera shi don buƙatar yanayin masana'antu kuma ya dace da aikace-aikacen sa ido da yawa masu zuwa:

1. Injin Juyawa / Abubuwan Tuƙi:

• Motocin Lantarki

• Injin Konewa

• Turbines Gas (Aero-Derivative, Heavy- Duty)

• Turbin Turbin

• Na'ura mai aiki da karfin ruwa Turbines

• Akwatunan Gear

2. Injin Juyawa / Abubuwan Tuƙi:

• Fans

• famfo

• Compressors (Radial, Axial, Screw, Reciprocating)

• Masu Samar da Wutar Lantarki

3. Aikace-aikace daban-daban:

• Kula da Jijjiga Tsarin Tsarin (misali, gadoji, gine-gine, hasumiya)

• Saƙon Saƙon Saƙo a cikin Injinan Juyawa

• Gabaɗaya Ma'aunin Jijjiga da Kula da Yanayi a cikin Tsarin Masana'antu

Babban amincinsa da iyawar zafin jiki ya sa ya dace musamman ga sassa masu mahimmanci kamar Makamashi (matakin wutar lantarki), Petrochemical, Manufacturing Heavy, Mining, and Marine Propulsion.

---

4. Sharuɗɗan shigarwa da haɗin kai (Bisa ga CAXXX Jerin Gabaɗaya)

Daidaitaccen shigarwa yana da mahimmanci don tabbatar da daidaiton ma'auni da tsawon rai na firikwensin. A ƙasa akwai mahimman wuraren shigarwa don na'urorin accelerometer kamar CA202 tare da kebul na haɗin kai da keɓaɓɓen kwandishan sigina.

1. Zaɓin Wuri Mai hawa

• Hana firikwensin kusa da iyakoki.

• Tabbatar an daidaita shi zuwa mafi tsayayyen ɓangaren injin. Guji hawa a kan gidaje ko sifofi tare da ƙananan taurin inji don hana murdiya resonance.

• Koma zuwa jagororin masana'antun injin da suka dace.

2. Hawan Surface Shiri (Don samfuri tare da tushe kamar CA201/CA202)

1. Shirya Surface: Ya kamata saman hawa ya zama lebur, mai tsabta, kuma daidai gwargwado ga axis da ake so na azanci.

2. Matsakaicin Bukatun: Labulen saman ya kamata ya zama 0.01 mm, tare da ingancin saman kusan N7.

3. Drilling & Tapping: Dangane da girman ramin hawa (yawanci M6), hako ramukan 4.8 mm zuwa zurfin 20 mm, kuma matsa M6 zaren zuwa zurfin 14 mm.

4. Tsaftacewa: Cire duk tarkace da mai.

3. Sensor hawa

1. Abubuwan da aka gyara: Shirya skru huɗu na M6x35 socket head screws da M6 guda huɗu makullin makulli na bazara.

2. Kulle: Ana ba da shawarar yin amfani da fili mai kulle zare mai ƙarfi kamar LOCTITE 241 zuwa screws don hana sassautawa saboda girgiza.

3. Hawa: Daidaita firikwensin, sanya wanki, da saka sukurori.

4. Ikon juyi: Yin amfani da maƙarƙashiya mai ƙarfi, haɗa sukullun guda huɗu daidai gwargwado zuwa 15 N·m. KADA KA wuce wannan karfin juyi!

4. Cable Routing da Gyara

1. Lanƙwasa Radius: Matsakaicin radius na lanƙwasa don kebul (ciki har da bakin hannu) dole ne ya zama ƙasa da mm 50. A guji kaifi lankwasa.

2. Tazarar Kayyade: Yi amfani da shirye-shiryen bidiyo masu dacewa da ~ Φ8 mm tubing don amintar da kebul ɗin zuwa injin ko tsarin kowane 100 zuwa 200 mm.

3. Guji tsoma baki: Rarraba igiyoyi nesa da babban ƙarfin wuta ko manyan layukan wuta don rage tsangwama na lantarki.

4. Taimakon damuwa: Bar madauki na USB kusa da firikwensin da akwatin junction don rage damuwa (koma zuwa madaidaicin zane na ISO 5348).

5. Haɗin Wutar Lantarki (Tsarin Ma'auni Na Musamman)

Daidaitaccen sigar CA202 yana buƙatar keɓantaccen amplifier caji (misali, IPC XXX) don samar da cikakkiyar sarkar aunawa:
CA202 Sensor → Integral Cable → Cajin Amplifier (IPC XXX) → Kebul na watsawa (K 2XX) → Sashin Rabuwar Galvanic (GSI XXX) → Tsarin Kulawa

1. Haɗin kai zuwa Amplifier Cajin: Haɗa jagorar tashi (wayoyin sigina biyu da garkuwa) na kebul na haɗin kai na CA202 zuwa tashoshin shigar da ƙarar cajin IPC XXX kamar yadda yake a littafinsa.

2. Hawan Amplifier Cajin: Ana shigar da IPC XXX a cikin akwatin mahaɗin masana'antu (misali, ABA 160) tare da aƙalla kariya ta IP65, a cikin yanayi tsakanin -25°C da +70°C.

3. Haɗin Cable Transmission: Yi amfani da kebul na watsa garkuwar wayoyi 2 (misali, K 2XX) don haɗa fitarwar amplifier ɗin caji zuwa sashin Rabuwar Galvanic mai nisa (GSI XXX).

4. Galvanic Separation Unit (GSU): GSI XXX yana ba da keɓewar wutar lantarki da juyawa sigina don tsarin watsa wayoyi 2, yana kawar da madaukai na ƙasa. Fitowar sa siginar wutar lantarki ce daidai gwargwado, wacce za a iya ciyar da ita kai tsaye cikin tsarin kulawa (misali, VM600, MMS).

5. Garkuwa: Tabbatar cewa garkuwar kebul ta yi ƙasa sosai a ƙarshen firikwensin/caji. Bi ka'idodin tsarin sa ido don saukar da maki ɗaya a ɗayan ƙarshen don hana madaukai na ƙasa.

6. Kwatanta hanyoyin hawa

Hanyar hawa kai tsaye tana shafar martanin mitar firikwensin. An fi son hawan dunƙule don mafi faɗin, mafi girman martanin mitar (har zuwa 30 kHz).

• Adhesive Dutsen (Cyanoacrylate, Tef mai gefe biyu): Ya dace da amfani na ɗan lokaci ko saman da ba za a iya hakowa ba. Ƙayyadaddun ayyuka masu zafi da rage yawan amsawa.

• Tushen Magnetic: Dace don bincike na wucin gadi, amma yana aiki kawai akan saman ferromagnetic. Yawan taro da taurin lamba suna shafar amsawar mita.

• Binciken Hannun Hannu: Don m ma'auni kawai. Amsar mitar tana da iyaka sosai (zai iya zama ƙasa da 2 kHz) kuma maimaitawar ba ta da kyau.
  Kammalawa: Don dindindin, ingantacciyar sa ido na masana'antu, ana ba da shawarar hawan dunƙule mai ƙarfi.

  
  

---

5. Kulawa da Muhimman Bayanan kula

1. Dubawa na yau da kullun: Bincika firikwensin lokaci-lokaci don lalacewa ta jiki (haɗe-haɗe), hannun rigar kebul don tsagewa, da amincin haɗin gwiwa.

2. Tsaftacewa: Tsaftace firikwensin firikwensin da zane mai laushi. Kauce wa gurbatacciyar kaushi.

3. Guji Zagi: Kar a sa firikwensin firgita fiye da ƙayyadaddun sa (misali, faduwa), zafin jiki mai yawa, ko lankwasawa mai tsanani na USB.

4. Kariyar ESD: Kafin sarrafa igiyoyi, musamman a cikin busassun muhalli, yakamata ma'aikata su saki kansu ta hanyar taɓa ƙarfen ƙasa.

5. Gyare-gyare: firikwensin shine ainihin kayan aiki. Dole ne masu amfani kada su tarwatsa shi. Duk wani gyara dole ne ma'aikatan Vibro-Meter/Meggitt masu izini su yi. Gyara mara izini yana ɓarna garanti.

6. Calibration: Samfurin an daidaita shi daidai a masana'anta. Ƙarƙashin amfani da kulawa na yau da kullun, yana ba da kwanciyar hankali na dogon lokaci kuma baya buƙatar sake fasalin lokaci-lokaci. Idan daidaito yana cikin shakka, tuntuɓi masana'anta ko cibiyar sabis mai izini.

7. Laifin Tsaro: Mai amfani yana da alhakin kimanta dacewar samfurin don takamaiman aikace-aikacen su. Rashin bin umarnin shigarwa da aminci, ko gyara kayan aiki mara izini, na iya haifar da rauni na mutum, lalacewar kayan aiki, kuma zai ɓata duk garanti da bayanan abin alhaki.

---