8237-1600 ProTech-GII Na'urar Kariya Mai Sauri

8237-1600 . babban abin dogaro ne na na'urar kariya mai saurin gudu daga jerin Woodward's ProTech-GII An ƙera shi don injin injin tururi, injin iskar gas, injin injin ruwa, da manyan injuna masu juyawa. Wannan samfurin yana fasalta ginin dutsen panel , gauraye high-voltage da ƙananan ƙarfin ƙarfin lantarki (HV/LV) , 2oo3 (fita-biyu- uku) abubuwan da aka zaɓe , da abubuwan shigar da aka zaɓa . Na'urar aminci ce da aka ƙware don SIL 3 (IEC 61508) kuma ta bi API 670, API 612, da ƙa'idodin API 611.

8237-1600 yana amfani da kayayyaki masu zaman kansu guda uku (A, B, C) a cikin tsarin gine-gine mai sau uku (TMR) . Kowane module yana lura da saurin rotor da hanzari ta hanyar firikwensin saurin sa. Lokacin da aka gano abin da ya wuce kima ko wuce gona da iri, tsarin yana ba da umarnin tafiya don rufe injin injin injin, yana kare ma'aikata da kayan aiki.

Wannan na'urar tana da manufa don aikace-aikace masu mahimmanci a cikin samar da wutar lantarki, mai & iskar gas, motsin ruwa, da tuƙin masana'antu inda ake buƙatar duka aminci da wadatar gaske.

2. Mabuɗin Siffofin

• Sau uku Modular Redundancy (TMR) - Na'urori masu zaman kansu guda uku; duk wata gazawa ba ta shafar sauran. Hot-swap (masanya kan layi) ana tallafawa.

• 2oo3 Zaɓuɓɓukan Tafiya na Relay Exports - Ma'anar zaɓe na ciki yana tabbatar da cewa aƙalla na'urori biyu dole ne suyi tafiya kafin fitarwar ta canza yanayin, hana tafiye-tafiye masu ban tsoro.

• Abubuwan shigar da Sauƙi Mai Sauƙi - Kowane module yana karɓar firikwensin sauri guda ɗaya, mai daidaita shi azaman MPU mai wucewa ko kusancin aiki / bincike-na yanzu.

• Ƙarfin Ƙarfafa & Ƙarfafa Kariya - Matsakaicin saurin tafiya: 0-32,000 rpm; kewayon saurin hanzari: 0-25,000 rpm/s.

• Gudun Gudun & Haɗawa Manajojin Ragewa - Yana ba da damar tsaka-tsaki, babban zaɓi, ko ƙaramar zaɓe tsakanin sigina har zuwa uku; hali fallback mai daidaitacce.

• Cikakken Gwaje-gwajen Kai - Gwajin saurin juzu'i na wucin gadi, gwajin sauri na manual/moto, gwajin jeri na atomatik (gwajin duk nau'ikan nau'ikan uku ta atomatik), gwajin fitila.

• Shigar abubuwan da suka faru - Rakodin da ba zai iya jurewa ba don wuce gona da iri / haɓakawa (abubuwan 20), tafiye-tafiye (abubuwan 50), ƙararrawa (abubuwan 50), da kololuwar gudu/haɗawa.

• Interface Mai amfani - Fannin gaba tare da tallafin harsuna da yawa (Ingilishi/ Sinanci), sa ido na ainihi, daidaitawa, da ƙaddamar da gwaji.

• Modbus RTU Sadarwa - RS-232/RS-485 tashar jiragen ruwa ta kowane module don saka idanu na nesa da sarrafawa.

• Shirye-shirye & Kayan aikin Kanfigareshan (PCT) – Software na PC don daidaita layi/kan layi, sarrafa fayil, da fitarwar log.

• Takaddun Takaddun Tsaro - TUV SIL 3, CSA Class I Division 2, ATEX Zone 2, GOST, kuma ya dace da ka'idodin API.

3. . Cikakken Bayanin Aiki

3.1 Hannun Tafiya da Kanfigareshan Fitarwa (Model Relay da Aka Zabi)

A cikin 8237-1600, kowane nau'i-nau'i da kansa yana kimanta saurinsa da siginar haɓakawa. Lokacin da yanayin tafiya (mafificin saurin gudu, wuce gona da iri, hasarar saurin gudu, da sauransu) ya auku, ƙirar zata saita latin tafiyar sa. Samfuran guda uku suna raba matsayin tafiyarsu ta hanyar bas ɗin CAN bokan. na ciki Tsarin masu jefa ƙuri'a na 2oo3 yana sa ido kan siginar balaguro guda uku kuma yana ba da kuzari ko ba da kuzarin mizanin tafiye-tafiyen Form-C guda biyu daidai da haka. Ana iya daidaita aikin mai jefa ƙuri'a kamar:

• Kashe kuzari zuwa tafiya (kasa-lafiya): asarar wuta yana haifar da tafiya.

• Ƙarfafawa don tafiya : Dole ne a yi amfani da wutar lantarki don tafiya.

3.2 Masu Gudanar da Saurin Sauri da Haɗawa

Lokacin da aka kunna, mai sarrafa redundancy yana bawa kowane module damar amfani da siginar saurin sa kawai amma har da siginar saurin daga sauran nau'ikan guda biyu. Wannan yana ba da damar:

• Zaɓe akan matsakaicin, mafi girma, ko mafi ƙarancin ƙimar gudu.

• Ma'anar faɗuwa lokacin da sigina biyu kawai ke da lafiya (HSS ko LSS).

• Ayyukan da za a iya daidaitawa lokacin da abubuwan shigarwa biyu suka gaza (tafiya ko babu tafiya).

• Ƙararrawar bambanci tare da daidaitacce kofa da jinkirin lokaci.

Wannan fasalin yana da amfani musamman lokacin da aka shigar da na'urori masu saurin gudu guda biyu kawai, ko kuma lokacin da bincike ɗaya ya gaza kan layi.

3.3 Fara Logic da Gane gazawar Sauri

ProTech-GII ya haɗa da ƙarin taimako na farawa guda biyu don hana tafiye-tafiye masu ban tsoro yayin da injin turbine yana tsaye ko kuma cikin ƙarancin gudu:

• Tafiyar Rashin Gudun Gudun : Idan gudun yana ƙasa da Saiti na gazawar Saurin kuma ba a rufe shigar da gazawar Saurin ba, tafiya yana faruwa.

• Tafiyar Ƙarshen Ƙarshen Gudun Gudun : Bayan umarnin farawa, idan gudun bai wuce wurin da aka saita ba a cikin ƙayyadadden lokacin da aka saita, tafiya yana faruwa.

Waɗannan ayyuka suna tabbatar da cewa tsarin baya yin tafiya yayin farawa na yau da kullun lokacin da fitarwar MPU na iya zama sifili.

3.4 Shiga taron da Alamun Fitar da Farko

Kowane module yana adana rajistan ayyukan masu zuwa a cikin ƙwaƙwalwar da ba ta da ƙarfi:

Alamar fitowa ta farko tana da mahimmanci don magance tushen dalilin bala'in tafiya.

4. Abubuwan Shigarwa da Waya

4.1 Bukatun Muhalli

• Shigar a cikin yadi IP56 (ko mafi girma).

• Yanayin yanayi: -20°C zuwa +60°C.

• Kauce wa hasken rana kai tsaye, ruwa, matsa lamba, da tsangwama mai ƙarfi na lantarki.

• Samar da isassun iska da sarari don shiga gaban panel.

• Dutsen a tsaye.

4.2 Wutar Lantarki

• Kowane module yana buƙatar tushen wutar lantarki masu zaman kansu guda biyu (HV ɗaya, LV ɗaya).

• Dole ne kowace tushen wutar lantarki ta kasance tana da na'urar dakon wutar lantarki.

• Dole ne a haɗa abubuwan shigar da HV zuwa ƙasa mai kariya (PE) tare da waya ≥1.5 mm².

4.3 Sensor Wiring

• Yi amfani da kebul na murɗaɗɗen garkuwa; haɗa garkuwa a gefe ɗaya (gefen module).

• Yanayin MPU: 1-35 Vrms, 1.5 kΩ impedance, buɗewar gano waya yana aiki.

• Yanayin bincike mai aiki: module yana ba da ikon 24 Vdc; Matsakaicin shigarwa Vlow <2V, Vhigh>4V.

• Dole ne a haɗa kowane bincike zuwa nau'i ɗaya kawai (babu haɗin kai ɗaya).

4.4 Fitar da Saƙo

• Relays na tafiya (Form‑C): 8 A @ 220 Vac / 8 A @ 24 Vdc - na iya fitar da solenoids kai tsaye.

• Relay ƙararrawa (ƙaƙƙarfan jiha): 1 A @ 24 Vdc - don sanar da nesa.

• Yi amfani da wutar lantarki ta waje idan jimillar halin yanzu ya wuce 500mA.

4.5 Modbus da tashar sabis

• Modbus: RS-485 max tsayi 1500 ft, RS-232 max 50 ft.

• Tashar tashar sabis (RS-232) don haɗin ɗan lokaci ne kawai (tsara / dawo da log).

5. Kanfigareshan da Aiki

5.1 Kanfigareshan Gaban Gaba

• Harshe: Turanci ko Sinanci.

• Kalmar wucewa da ake buƙata don matakin gwaji (misali, fara gwaji) da matakin daidaitawa (canja sigogi).

• Module dole ne ya kasance cikin yanayin da ya tatse don shigar da yanayin sanyi.

• Siffofin da za a iya daidaitawa: nau'in bincike, haƙoran gear, rabon kaya, madaidaitan matakan haɓakawa da sauri, mai sarrafa sakewa, Modbus, hanyoyin gwaji, da sauransu.

5.2 Shirye-shiryen da Kayan Kanfigareshan (PCT)

• Haɗa ta hanyar tashar sabis (RS-232).

• Yana ba da izinin ƙirƙira/gyara fayilolin saitunan layi (*.wset).

• Loda/zazzagewar daidaitawa akan layi.

• Fitar da rajistan ayyukan zuwa HTML.

• Yana goyan bayan kwatancen daidaitawa tsakanin fayiloli.

5.3 Kwafi Kanfigareshan Tsakanin Moduloli

• Daga gaban panel, za a iya kwafi tsarin tsarin ɗaya zuwa wani tsarin.

• Abubuwan da aka keɓe: kalmomin shiga, adiresoshin bawa na Modbus, abubuwan da ake so allo na gida.

• Ana iya kunna ƙararrawar rashin daidaituwa ta daidaitawa.

6. Takaddun Takaddun Tsaro da Biyayya

Jiha mai aminci : Lokacin da aka saita azaman De-ƙarfafa don tafiya , ƙirar tana tafiya akan jimlar asarar wutar lantarki - yanayin rashin lafiya.

7. Aikace-aikace na yau da kullun

8237-1600 ya dace da:

• Masu samar da injin turbin gas - kariya mai saurin gudu don hana gazawar ruwa.

• Turbine kompressors - a cikin matatun mai da tsire-tsire masu sinadarai.

• Hydro turbines – anti-gunaway kariya.

• Injunan juzu'i (gas/dizal) - don matsawar iskar gas ko ƙarfin gaggawa.

• Motoci masu saurin gudu da kwampreso – gano saurin wuce gona da iri.

Ƙarfinsa don tallafawa maye gurbin tsarin kan layi da 2oo3 jefa ƙuri'a ya sa ya dace don aikace-aikace inda rage lokaci yana da tsada sosai.

8. Shirya matsala da Kulawa

8.1 Alamar LED ta gaban Panel

8.2 Laifi gama gari da Magani

8.3 Nasihar Kulawa

• Yi gwajin jeri ta atomatik kowane watanni 6-12 don tabbatar da duk kayayyaki.

• Kowace shekara 5-10, mayar da sashin zuwa Woodward ko cibiyar sabis mai izini don dubawa da haɓakawa.

• Idan an adana fiye da watanni 24, yi amfani da wutar lantarki na tsawon mintuna 5 don sake fasalin masu ƙarfin lantarki.

9. Yin odar Bayani da Na'urorin haɗi