ABB AI930S 3KDE175511L9300 Analog Input Module

AI930S (AI4H-Ex) babban aiki ne, ingantaccen tsarin shigar da analog abin dogaro a cikin ABB Ability™ System 800xA® da dangin S900 Remote I/O, wanda aka tsara musamman don sarrafa tsarin masana'antu da aikace-aikacen sarrafa kansa. Tsarin yana fasalta tashoshi huɗu masu zaman kansu na 4…20mA na shigar da siginar na yanzu da haɗin haɗin haɗin gwiwar yarjejeniya na HART®, yana ba da damar haɗin kai tsaye zuwa masu watsa wayo don ayyuka biyu na samun siginar analog da musayar bayanai na dijital.

Kasancewa cikin jerin S900 I/O Nau'in S, AI930S an tsara shi don shigarwa a wurare masu haɗari (Zone 1) kuma yana iya haɗawa zuwa na'urori masu aminci (Ex i). Ya dace da masana'antu tare da tsauraran aminci da buƙatun dogaro, kamar mai & gas, petrochemical, magunguna, da samar da wutar lantarki. Tsarin yana goyan bayan sadarwar filin bus na PROFIBUS-DP/DPV1, yana ba da damar haɗin kai mara kyau tare da tsarin sarrafa ABB kamar AC800M, AC800F, da AC870P, da kuma tsarin PROFIBUS na ɓangare na uku ta fayilolin GSD ko kayan aikin DTM.

Samfurin ya haɗa da ci-gaba fasali kamar keɓewar lantarki, saka idanu na layi, bincikar kuskure, Hot Swap, da Tsarin Kanfigareshan Mai zafi A Run (HCIR), haɓaka samuwar tsarin tare da rage shigarwa, ƙaddamarwa, da farashin kulawa. Gine-ginensa mai ƙarfi yana cike da rufin kariya na lalata G3, yana sa ya dace da yanayin masana'antu masu tsauri.

---

2. Key Features da Fa'idodi

2.1 Tsare Tsare Tsare Tsare Tsare & Babban Dogara

AI930S ta ATEX bokan don amfani a yankuna masu haɗari na Zone 1. Ana iya shigar da shi kai tsaye a cikin filin, rage tsayin kebul na sigina, kabad ɗin marshalling, farashin tsarin, da yuwuwar maki gazawar. Cikakken keɓewar lantarki (input-bus-power) a cikin tsarin yadda ya kamata yana hana tsangwama na madauki na ƙasa da tasirin wutar lantarki na yanayin gama gari, yana tabbatar da ingantaccen sigina.

2.2 Haɗin Ƙarfin Sadarwar HART

Tsarin yana fasalta ginanniyar Babban HART Master, yana ba da damar sadarwa kai tsaye tare da na'urori masu wayo na HART ta madaidaicin 4…20 mA, yana tallafawa:

• Cyclic HART Canjin Karatu (har zuwa 8 masu canji-masu iyo, misali, zazzabi, matsa lamba, kwarara)

• Ƙididdigar Matsayin HART (Gano ƙararrawar na'urar, canje-canjen tsari, kurakuran sadarwa)

• Acyclic HART Siga Kanfigareshan (ta hanyar kayan aikin DTM ko masters masu jituwa na DPV1)

2.3 Babban Daidaito da Kwanciyar hankali

Module ɗin yana amfani da mai canza ADC 16-bit. Ana watsa ma'auni masu ƙima a cikin μA (misali, 4 mA yayi daidai da 4000). Yana goyan bayan zaɓaɓɓun jeri guda biyu: 0…20mA da 4…20mA. Algorithm mai daidaitawa ta PT1 (tsawon lokaci: 0.1 s zuwa 29.2 s) an gina shi don murkushe hayaniyar filin yadda ya kamata da haɓaka kwanciyar hankali na sigina.

2.4 Kanfigareshan Mai sassauƙa da Tsara

Ana goyan bayan hanyoyin daidaitawa guda biyu:

• Yanayin 1: Haɗaɗɗen saitunan sigina a matakin module, dace da saurin turawa.

• Yanayin 2: Saitunan ma'auni masu zaman kansu kowane tashoshi, ba da damar daidaita ma'aunin ma'auni, lokutan tacewa, ƙimar maye gurbin kuskure, da sauransu.

2.5 Cikakken Bincike da Kulawa

• Kula da Layi: Yana goyan bayan bincike don hutun waya (<2 mA), gajeriyar kewayawa (<1.5 V), nauyi mai yawa, da sauransu.

• Kula da Matsayin Sadarwar HART: Yana ba da ra'ayi na ainihi game da ɓarna sadarwar na'urar ko canje-canje kaɗan.

• Matsayin Kiwon Lafiya na Module: Rahoton ƙirar ƙirar da kurakuran tashoshi ta daidaitattun telegram na bincike na PROFIBUS.

2.6 Ragewa da Babban Samuwar

Yana goyan bayan sakewar wutar lantarki da sakewar sadarwa (yana buƙatar ƙarin hanyar sadarwa ta CI920). Features Hot Swap da Hot Kanfigareshan A Run (HCIR), ƙyale maye gurbin module ko sanyi canje-canje a lokacin da tsarin aiki, muhimmanci inganta tsarin uptime.

2.7 Sauƙaƙan Shigarwa da Kulawa

Yana amfani da haɗe-haɗen ƙira na injuna da tubalan tasha na jerin S900, suna tallafawa hawan dogo na DIN. Matsayin LEDs akan gaban module suna sauƙaƙe saurin bincike akan rukunin yanar gizo. Lokacin amfani da kayan aikin DTM na ABB ko software na SMART VISION, saitin hoto, saka idanu na ainihin lokaci, da nazarin bayanan tarihi ana kunna.

2.8 Amfanin Haɗin Tsari

• Cikakken jituwa tare da manyan tsarin DCS kamar ABB System 800xA da Symphony Plus.

• Fayilolin GSD na yau da kullun sun tanadar don sauƙaƙe haɗin kai cikin cibiyoyin sadarwar PROFIBUS na ɓangare na uku.

• Yana goyan bayan tsarin FDT/DTM don sarrafa nau'in na'ura mai haɗin kai da daidaita siga.

  
  

---

3. Yankunan Aikace-aikace

Ana amfani da tsarin AI930S sosai a cikin yanayin masana'antu masu zuwa:

1. Sarrafa tsari
   Don samun siginar analog kamar zazzabi, matsa lamba, kwarara, da matakin. Ana amfani da shi a cikin tacewa, sinadarai, magunguna, da masana'antun sarrafa ruwa.

2. Tsare-tsaren Sa ido na Tsaro
   Haɗa amintattun na'urori masu auna firikwensin a cikin wurare masu haɗari don sa ido na ainihi na sigogin aminci kamar tattara iskar gas, harshen wuta, da girgiza.

3. Kula da Muhalli & Gudanar da Makamashi
   Tattara bayanan amfani da makamashi (misali, halin yanzu, yanayin wutar lantarki) da sigogin hayaki (misali, SO₂, NOₓ) don tallafawa nazarin ingancin makamashi da bin muhalli.

4. Gudanar da Lafiya Kayan Kayan aiki
   Karatun halin na'urar ciki ta hanyar masu canjin HART (misali, matsayin bawul, zazzabi mai kunnawa, tsawon rayuwar firikwensin) don ba da damar kiyaye tsinkaya.

   
   

---

4. Ka'idodin shigarwa da haɗin kai

4.1 La'akari da Haɗin Wutar Lantarki

• AI930S wani nau'in shigarwa ne mai aiki wanda ke ba da ikon madauki (kimanin 15 VDC) don masu watsa wayoyi 2.

• Dole ne a lissafta jimlar madauki na ƙarfin lantarki:
  Utotal=Utransmitter+Imax×Rcable≤15VUtotal=Utransmitter+Imax×Rcable≤15V

• Idan masu watsawa da yawa suna raba ƙasa ɗaya, ana ba da shawarar cewa masu watsawa su sami keɓewar lantarki ta gefen fitarwa don guje wa kurakuran auna sakamakon madaukai na ƙasa.

4.2 Haɗin Na'urori Masu Amintacce Mai Tsari

Lokacin haɗa na'urori masu aminci a cikin Yanki 0/1, dole ne a bi ka'idodin EN 50039. Kwatanta sigogi masu zuwa:

• Fitar Module: Uo,Io,Po,Lo,CoUo,Io,Po,Lo,Co

• Shigar da Na'urar: Ui,Ii,Pi,Li,CiUi,Ii,Pi,Li,Ci

• Sigar Kebul: Lc,CCLc,CC

Tabbatar da Uo≤UiUo≤Ui, Io≤IiIo≤Ii, Lo≥Li+LcLo≥Li+Lc, Co≥Ci+CcCo≥Ci+Cc.

4.3 Zaɓin Kebul da Waya

• Yi amfani da igiyoyi masu murɗaɗɗen garkuwa tare da shimfida garkuwar wuri guda.

• Guji yin daidai da igiyoyin wuta; kula da mafi ƙarancin rabuwa na ≥30 cm.

• Rike tsayin kebul gajarta yadda zai yiwu don rage raguwar ƙarfin lantarki da tsangwama amo.

  
  

---

5. Kanfigareshan Siga da Taswirar Bayanai

5.1 Zaɓin Fayil na GSD

• ABB_04D2.GSD : Yanayin 2 (daidaitawar tashoshi mai hikima, Turanci)

• ABB_04D2.GSG : Yanayin 2 (Jamus)

• ABB104D2.GSD : Yanayin 1 (daidaituwa-masu-hikima, Turanci)

• ABB104D2.GSG : Yanayin 1 (Jamus)

5.2 Auna Range da Kunna HART

5.3 Saitin Tace / Damping

Matsakaicin lokacin tacewa: KASHE, 0.1 s, 2.6 s, 29.2 s.
Lokacin da aka kunna sadarwar HART, ana ba da shawarar saitin tacewa ≥100 ms don tabbatar da daidaiton sigina.

5.4 Dabarar Ƙimar Maye gurbin Kuskure

• Ƙimar Ƙimar: Sakamakon 3.6 mA (na 4…20 mA kewayon) ko 0 mA (na 0…20 mA) akan kuskure.

• Matsakaicin Ƙimar: Sakamakon 22 mA akan kuskure.

• Ƙimar Ƙarshe na Ƙarshe: Yana riƙe da ƙima ta ƙarshe mai inganci.

  
  

---

6. Bincike da Kulawa

6.1 Kula da Matsayi da Ƙararrawa

Tsarin yana ba da rahoton matsayin ainihin-lokaci ta hanyar telegram na bincike na PROFIBUS, gami da:

• Rashin wutar lantarki

• Katsewar sadarwa

• Tashar waya break / short circuit / overload

• Laifin sadarwa na na'urar HART

• Module zafin jiki

6.2 Matakan magance matsala

1. Bincika samar da wutar lantarki da haɗin waya.

2. Tabbatar da adireshin PROFIBUS da saitunan ƙimar baud.

3. Yi amfani da DTM ko SMART VISION don karanta cikakkun bayanan bincike.

4. Tabbatar da idan wutar lantarki na samar da watsawa ya cika buƙatu.

5. Tabbatar da adireshin na'urar HART da sigogin sadarwa.

6.3 Tsarin Musanya Zafi

1. Tabbatar cewa an kunna aikin musanya mai zafi a cikin tsarin sarrafawa.

2. Kashe kuzari ko sanya ɓangaren tsarin sarrafawa da abin ya shafa a yanayin kulawa.

3. Cire ɓangarorin da ba daidai ba kuma saka abin maye gurbin.

4. Tsarin yana gane kuma yana dawo da sadarwa ta atomatik ba tare da buƙatar saukar da tsari ba.

   
   

---

7. Daidaituwa da Haɗin Tsarin Tsarin

7.1 Haɗin kai tare da ABB Control Systems

• AC870P: Haɗe ta hanyar DTM, yana goyan bayan tsarin halin LSB, sikelin bayanai ta atomatik.

• AC800F: Yana amfani da shigo da GSD ko samfuri; Ana ba da shawarar sigar matsayin MSB.

• AC800M: Haɗe ta hanyar fayilolin HWD, yana goyan bayan sikelin kashi da haɗin matsayi.

7.2 Haɗin Tsarin Jam'i Na Uku

• Ana ba da daidaitattun fayilolin PROFIBUS GSD, masu jituwa tare da yawancin PLCs da DCSs.

• Za'a iya samun ci gaba na tsari da bincike ta hanyar tsarin FDT/DTM.

7.3 Tallafin Kayan Aikin Software

• ABB Device Library: Ya ƙunshi cikakken DTM suite da gumaka.

• SMART VISION: Don tsarin na'urar HART da saka idanu.

• Sarrafa magini: Don shirye-shirye da hardware sanyi na AC800 jerin.