ABB TU834 3BSE040364R1 Rukunin Ƙarshe Module

TU834 shine Extended Module Termination Unit (MTU) a cikin jerin kayan aikin ABB Ability ™ System 800xA®, wanda aka tsara musamman don tsarin tsarin S800 I/O. Wannan samfurin na'ura ce mai wuce gona da iri da ake amfani da ita don haɗa wayoyi na fili zuwa madaidaitan I/O modules, yayin da kuma ɗauke da ɓangaren aikin watsa siginar ModuleBus. TU834 yana tallafawa har zuwa tashoshin 8 I / O da 2 + 2 tsarin haɗin wutar lantarki, yana sa ya dace da sigina da rarraba wutar lantarki a wurare daban-daban masu buƙata irin su aikin sarrafa masana'antu, sarrafa tsari, da kuma kula da wutar lantarki.

TU834 tana amfani da hanyar hawan dogo na DIN kuma yana fasalta maɓalli na inji, kulle module, da ƙirar kariyar ƙasa don tabbatar da amincin shigarwa da aminci. Tsarinsa mai ƙaƙƙarfan tsari da daidaitawa mai sassauƙa ya sa ya zama ingantaccen wayoyi da mafita na rarraba sigina don tsarin I/O masu matsakaici zuwa matsakaicin girma.

---

2. Key Features da Fa'idodi

1. Tsarin Tashoshi Mai Girma

• Yana goyan bayan tashoshi na I/O masu zaman kansu har zuwa 8, kowanne sanye take da tashoshi I/O guda biyu da kuma hanyar haɗin ZP ɗaya.

• Yana ba da tashoshin wutar lantarki na 4 (L +/L-) da maki 20 ikon sarrafawa (0 V) don saduwa da buƙatun samar da wutar lantarki na tsarin hadaddun.

2. Maɓallin Makanikai Yana Hana Shigar da Ba daidai ba

• An sanye shi da saiti biyu na maɓallai na inji, kowannensu yana da matsayi 6 da za a iya zaɓa, yana ba da jimillar haɗin haɗin injin 36.

• Yana hana shigar da nau'ikan nau'ikan I/O ba daidai ba ta hanyar inji, inganta daidaiton shigarwar tsarin da aminci.

3. Module Kulle da Ƙaddamarwa Sarrafa

• Na'urar kulle da aka gina a ciki tana kulle tsarin I/O a kan MTU.

• Kulle lokaci guda yana aika siginar BLOCK zuwa tsarin, ajiye shi a cikin yanayin farawa har sai an kulle shi gabaɗaya, yana tabbatar da farawa tsarin lafiya.

4. Sauƙaƙan Shigarwa da Tsarin ƙasa

• Yana goyan bayan hawan dogo na DIN a tsaye ko a kwance, yana dacewa da shimfidar majalisar ministoci daban-daban.

• An sanye shi da latch ɗin dogo don shigarwa da sauri ko cirewa ta amfani da sukudireba.

• Yana ba da ingantaccen haɗin ƙasa, bin ka'idodin kariyar kayan aikin Class I ta IEC 61140.

5. Haɗin Sigina da Rarraba Wuta

• Yana haɗa aikin rarraba siginar ModuleBus, mai ikon wuce siginar bas da bayanin adireshin zuwa MTU na gaba.

• Yana haifar da daidaitattun adireshi ta atomatik don samfuran I/O masu zuwa ta hanyar matsawa siginonin matsayi masu fita.

6. Cikakken Saitin Na'urorin haɗi

• Ya haɗa da sandunan shunt guda 8 (TY801) a cikin fakitin don sassauƙan haɗin siginar shigarwa.

---

3. Bayanin Layout na Terminal

TU834 yana ba da tsari mai tsauri don dacewa da wayoyi da kulawa. Tsarin hanyoyin haɗin haɗin gwiwa (X1) shine kamar haka:

Wannan shimfidar wuri yana goyan bayan shigarwar wutar lantarki guda biyu kuma ya haɗa da ƙungiyoyin tashar I / O masu zaman kansu guda biyu, kowannensu yana da tashoshi 8, sauƙaƙe tsarin tsarin don samar da wutar lantarki da sarrafa sigina.

---

4. Yanayin aikace-aikace

TU834 ana amfani dashi ko'ina a cikin masana'antu da filayen ababen more rayuwa masu zuwa:

1. Tsare-tsaren Aiki Automation

• An yi amfani da shi a cikin ɗakunan ajiya don masana'antu kamar sinadarai, mai, da gas don haɗa na'urori masu auna firikwensin, masu kunnawa, da masu sarrafawa.

2. Kula da Wutar Lantarki da Kariya

• Aiwatar da saye da rarraba sigina kamar halin yanzu da ƙarfin lantarki a cikin tsarin rarraba wutar lantarki da tashoshin sadarwa.

3. Sarrafa Layin Kera

• Haɗe cikin tsarin PLC don sarrafa siginar dijital da analog da yawa.

4. Injiniyan Ruwa da Ruwa

• Ya dace da tsarin kula da jirgin ruwa ta hanyar takaddun shaida na ruwa (ABS, BV, DNV-GL, LR).

5. Aikace-aikacen Yanki masu haɗari

• An sanye shi da ATEX Zone 2 da takaddun shaida na cULus don amfani a cikin mahalli masu haɗari kamar Class I Division 2.

  
  

---

5. Bayanan shigarwa da Amfani

1. Pre-Ininstall Checks

• Tabbatar cewa saitin maɓalli na inji ya dace da nau'in I/O da aka nufa.

• Tabbatar cewa filin hawan dogo na DIN ya cika buƙatun girma.

2. Ka'idojin Waya

• Yi amfani da wayoyi waɗanda suka dace da ƙayyadaddun bayanai kuma ƙara matsa lamba zuwa juzu'in da aka ba da shawarar.

• Tabbatar da madaidaicin polarity na wutar lantarki don gujewa haɗin baya.

3. Kasa da Kariya

• Koyaushe cimma ingantaccen ƙasa ta latch don saduwa da buƙatun kariya na kayan aiki na Class I.

• Kula da ƙayyadaddun kariyar IP20 a cikin ƙasa mai ƙura ko ɗanɗano.

4. Kulawa da Sauyawa

• Yi canje-canjen shigarwa/cire ko daidaitawa kawai lokacin da wuta ke kashewa.

• Yi amfani da screwdriver don sarrafa latch da maɓallai na inji don guje wa tarwatsawar tilas.

---