ABB TU818 3BSE069209R1 Rukunin Ƙarshe Module

TU818 karamin tashar Module Termination Unit (MTU) ne mai lamba 32 wanda aka tsara don tsarin ABB's S800 I/O, wanda ya dace da sarrafa masana'antu da aikace-aikacen sarrafa tsari har zuwa 50V. A matsayin naúrar mu'amala mai ƙarfi, TU818 ta dogara yana haɗa siginar siginar filin zuwa samfuran S800 I/O. Ya haɗa da wani ɓangare na ModuleBus, yana ba da rarraba wutar lantarki, sadarwa, da ayyukan aikin adireshi zuwa kayan aikin I/O. Ƙirƙirar ƙirar sa, sassauƙan shigarwa, da sauƙi mai sauƙi ya sa ya zama mai amfani sosai a cikin tsarin sarrafawa ta atomatik a fadin masana'antu kamar samar da wutar lantarki, sunadarai, masana'antu, da ruwa.

The TU818 is compatible with a variety of S800 series I/O modules, including AI810, AI815, AI835A, AI843, AI845, AI880A, DI810, DI811, DI818, DI830, DI831, DI840, DI880, DI885, DO818, and DP840, yana ba wa masu amfani daɗaɗɗen ƙima, ingantaccen ingantaccen maganin ƙarewar sigina.

---

2. Mabuɗin Siffofin

1. Ƙirƙirar Ƙira
   TU818 tana da ƙayyadaddun tsari sosai tare da faɗin 64mm kawai (ciki har da masu haɗawa). Yana goyan bayan haɗin kai har zuwa tashoshi na 32 na sigina da kuma sarrafa iko a cikin wuraren da aka ƙuntata sararin samaniya, manufa don shigarwa mai yawa.

2. Zaɓuɓɓukan Waya Masu sassauƙa
   suna Goyan bayan haɗin waya ɗaya ko biyu (dangane da nau'in ƙirar I/O da aka haɗa). Tashoshin dunƙule-ƙulle suna ɗaukar ingantattun wayoyi tare da ɓangaren giciye na 0.5-2.5 mm² ko wayoyi masu ɗauri na 0.5-1.5 mm².

3. Maɓalli na Injini don Rigakafin Kuskure
   An sanye shi da tsarin maɓallin maɓalli guda biyu. Kowane maɓalli yana da matsayi shida, yana ba da damar jimlar 36 nau'ikan haɗin injin daban-daban. Wannan yana hana shigar da nau'ikan nau'ikan I/O da ba daidai ba, haɓaka amincin tsarin.

4. Haɗin ModuleBus da Ayyukan Adireshin
   MTU ba wai kawai ke rarraba siginar ModuleBus zuwa na'urorin I/O da aka haɗa ba amma kuma ta atomatik yana haifar da adiresoshin module ta atomatik ta hanyar canza siginar matsayi, sauƙaƙe tsarin tsarin da ƙaddamarwa.

5. Dogaran Dutsen Wuta da Injin Kulle
   An ƙera don daidaitaccen hawan dogo na DIN tare da haɗaɗɗen latch ɗin inji, yana tabbatar da kafaffen ƙasa da hana ɓarna cikin haɗari. Na'urar kullewa tana tabbatar da tsarin I/O a wurin sannan ta aika da siginar 'BLOCK' zuwa tsarin, ajiye shi cikin yanayin farawa har sai an kulle shi gabaɗaya.

6. Babban Dorewa
   An raba toshe tashar tashar zuwa ƙungiyoyi biyu keɓe masu zaman kansu, kowannensu yana da tashoshi 16. Babban murfin yana cirewa, yana ba da izinin maye gurbin tashar tashar ko da lokacin da tsarin ke aiki, yana sauƙaƙe kulawa da sauri a lokuta kamar lalacewa tashoshi.

   
   

---

3. Tsarin Injini da Lantarki

Tsarin Injini

• Rufewa da Kariya: Ƙimar kariya ta IP20 (IEC 60529), dace da shigarwa a cikin ɗakunan kulawa na cikin gida.

• Haɗawa: Daidaitaccen hawan dogo na DIN, wanda ya dace da duka a kwance da kuma a tsaye (zazzabi na yanayi ba dole ba ne ya wuce 40 ° C don hawa tsaye).

• Ƙirar Kulle: Yana da madaidaicin latch wanda za'a iya shiga cikin sauƙi ko saki ta amfani da sukudireba.

• Layout Terminal: 40-pole dunƙule m block, shirya a cikin layuka biyu na 20 matsayi kowane, daidai da 32 I / O tashoshi da 2 sets na aiwatar ikon sadarwa (L1 +/L1-, L2 +/L2-).

Tsarin Lantarki

• Isolation Channel: An raba tashoshi na sigina zuwa rukuni biyu, kowannensu yana da tashoshi 16, yana ba da keɓewar wutar lantarki tsakanin ƙungiyoyi don ingantaccen rigakafin hayaniya.

• Rarraba ModuleBus: Ya haɗa da ƙirar ModuleBus yana ba da ƙarfin 5V da 24V zuwa kayan aikin I/O, tare da matsakaicin halin yanzu na 1.5A kowanne.

• Haɗin Wuta na Tsari: Yana goyan bayan shigarwar wutar lantarki / fitarwa guda biyu masu zaman kansu, kowanne tare da matsakaicin ci gaba na yanzu na 8A.

  
  

---

4. Tsarin Haɗin kai da Aikace-aikace

A matsayin maɓalli mai mahimmanci na ABB Ability ™ System 800xA® dandamali hardware, TU818 yana haɗawa tare da S800 jerin I / O modules don gina ingantaccen abin dogara, tsarin I/O da aka rarraba. Ya dace da yanayin aikace-aikace na yau da kullun masu zuwa:

• Tsari Automation: Samun sigina da sarrafawa a masana'antu kamar sinadarai, mai, da gas.

• Kulawa da Wutar Lantarki: Analog da sarrafa siginar dijital a cikin tashoshin lantarki da tsire-tsire.

• Ƙirar Ƙirar Ƙarfafawa (MES): Matsayin kulawa da kula da kayan aikin samar da layi.

• Injiniya na Marine da Offshore: Ƙungiyoyin rarrabawa kamar ABS, BV, DNV-GL, da LR sun tabbatar da shi, yana mai da shi dacewa da tsarin sarrafa jirgin ruwa.

• Ikon Muhalli: Matsala ta siginar don Gina Automation da tsarin HVAC.

  
  

---

5. Ka'idodin Shigarwa da Kulawa

1. Duban shigar da kafin shigar
   Tabbatar da cewa saitin maɓalli na inji yayi daidai da nau'in ƙirar I/O da aka nufa. Bincika skru na ƙarshe don amincin.

2. Ka'idojin Waya
   Yi amfani da wayoyi a cikin ƙayyadadden yanki na ketare. Matse sukurori zuwa juzu'in shawarar da aka ba da shawarar, guje wa fallasa igiyoyi ko lalata waya.

3. Ƙaddamar da ƙasa da rufi
   Tabbatar da layin dogo na DIN yana da ƙasa yadda ya kamata, tare da bin ƙa'idodin kariyar kayan aikin IEC 61140 Class II.

4. Kulawar Cikin Sabis
   Idan allon tashar yana buƙatar sauyawa, ana iya cire murfin saman ba tare da saukar da tsarin ba, yana ba da damar kiyayewa ba tare da katse aiki ba.

   
   

---

6. Bayanin Tsaro da Biyayya

TU818 ya bi ka'idodin aminci na ƙasa da ƙasa da yawa da ƙa'idodin muhalli, gami da alamar CE, ATEX Zone 2 don wurare masu haɗari, da manyan takaddun shaida na al'umma na rarraba ruwa, yana tabbatar da amincin sa da yarda da buƙatun yanayin masana'antu. Tsarin na'urar ya dace da IEC / EN 61131-2 yanayin aiki na inji, yana sa ya dace da tsarin sarrafa sarrafa kansa na masana'antu.

---