ABB DO840 3BSE020838R1 Digital Output

DO840 babban aikin 16-tashar kayan fitarwa na dijital a cikin jerin ABB Ability ™ System 800xA®, wanda aka tsara don tsarin sarrafa sarrafa kansa na masana'antu yana buƙatar babban dogaro da ƙwarewar bincike. Wannan tsarin yana goyan bayan aikace-aikacen da ba a sake maimaitawa ko guda ɗaya ba, fasalulluka na ci gaba da bincike kan jirgin, nunin matsayin fitarwa, da hanyoyin kariya da yawa, yana mai da shi dacewa da buƙatun yanayin masana'antu kamar sarrafa tsari, masana'anta, samar da wutar lantarki, da jigilar jirgin ƙasa.

Tsarin yana amfani da 24V DC abubuwan samarwa na yanzu, tare da matsakaicin ci gaba da fitarwa na yanzu na 0.5A kowane tashoshi. Ya haɗa da jujjuyawar juyi da kariyar zafin jiki, yana ba da ingantaccen ƙarfin ɗaukar nauyi da amincin tsarin. Dukkan tashoshi sun kasu kashi biyu, kowanne yana dauke da tashoshi 8 na fitarwa da shigar da wutar lantarki mai zaman kanta. Warewar wutar lantarki tsakanin ƙungiyoyi da tallafi don kula da wutar lantarki na ƙara haɓaka amincin tsarin da kiyayewa.

---

2. Key Features & Fa'idodi

1. High Channel Density & Sassauƙi Kanfigareshan

• 16 tashoshin fitarwa na dijital masu zaman kansu, sun kasu kashi biyu ware ƙungiyoyi (tashoshi 8 kowace ƙungiya).

• Kowane rukuni ya haɗa da shigarwar sa ido na lantarki don yanayin samar da wutar lantarki na ainihin lokaci.

• Yana goyan bayan jeri ɗaya ko kari don biyan buƙatun samuwa daban-daban.

2. Advanced Diagnostics & Matsayin Nuni

• Kowane tashoshi yana da alamar LED mai launi biyu:

• Yellow: An sami kuzarin fitarwa.

• A kashe: An daina samun kuzari.

• Ja: Laifin tashar (na waje ko na ciki).

• LEDs matakin-module suna ba da ra'ayin matsayi gaba ɗaya.

• Ayyukan OSP (Saitin Fitarwa kamar Ƙaddara) yana saita abubuwan da aka zaɓa ta atomatik zuwa ƙayyadadden yanayi mai aminci akan gano kuskure.

• Ayyukan Gwajin bugun jini lokaci-lokaci yana juyar da abubuwan da aka fitar (<1ms) don gano buɗaɗɗe ko gajerun da'irori; Ana iya kunna ko kashe wannan aikin ta hanyar sigogi.

3. Cikakken Tsarin Kariya

• Kariya na yau da kullun: Ƙayyadaddun halin yanzu kowane tashoshi, tare da matsakaicin matsakaicin gajeren zango na 2.5A.

• Kariyar zafin jiki: Matakin fitarwa yana rufe ta atomatik lokacin da zafin jiki ya wuce 150°C (302°F) kuma yana dawowa lokacin da zafin jiki ya faɗi zuwa kusan 140°C (284°F) (Yanayin Sake saitin atomatik).

• Latch on Fault Mode: Zaɓin kashe abubuwan da ake fitarwa yayin da ake yin nauyi har sai an share laifin kuma an gane shi.

• Kariyar EMC & Ƙunƙarar Ƙaƙwalwar Ƙaƙwalwa: Gina-ginen abubuwan kariya na EMC da da'irar ɗaukar nauyi.

4. Babban Ayyukan Lantarki & Daidaitawa

• Faɗin ƙarfin ƙarfin aiki: 19.2 - 32 V DC.

• Ƙarƙashin ƙarfin wutar lantarki a kan-jihar (≤0.3V), rage yawan amfani da wutar lantarki da zubar da zafi.

• Yana goyan bayan tsayin kebul na filin har zuwa mita 600 (yadi 656).

• Dace da daban-daban Dutsen Ƙarshe Units (MTUs), ciki har da TU810, TU812, TU814, TU830, TU833, TU842, TU843, da kuma TU852, saukar da daban-daban inji hawa da wiring bukatun.

  
  

---

3. Fault Diagnostics and Handling

DO840 yana fasalta iyawar gwajin matakan matakai da yawa, bambanta tsakanin:

1. Laifin tashar tashoshi na waje: Ƙananan ƙarfin samar da wutar lantarki ko tashoshi mai yawa.

2. Laifin tashoshi na ciki: gazawar direban fitarwa ko babban wutar lantarki.

3. Laifi-Mataki na Module: Rashin wutar lantarki na ciki ko hanyar sadarwa ta ciki tsakanin moduloli a aikace-aikace masu yawa.

Samfurin yana goyan bayan nau'ikan sarrafa kaya biyu:

• Yanayin Sake saitin atomatik: Fitowa yana dawowa ta atomatik bayan matsanancin zafin jiki yana haifar da raguwar zafin jiki.

• Latch akan Yanayin Kuskure: Fitowa ya kasance a kashe har sai an cire yanayin kiba kuma da hannu.

  
  

---

4. Shigarwa da Waya

Ana iya amfani da DO840 tare da MTU daban-daban don dacewa da shimfidu na inji da hanyoyin wayoyi:

Teburan wayoyi suna dalla-dalla dalla-dalla madaidaitan tashoshi ko fil na kowane tashoshi da samar da wutar lantarki akan MTU daban-daban, suna sauƙaƙe turawa da kiyayewa ta injiniyoyi.

---

5. Yanayin Aikace-aikace na al'ada

DO840 ya dace da aikace-aikacen masana'antu masu zuwa:

1. Tsari Automation: Ikon bawul, famfo farawa/tsayawa, fitarwar ƙararrawa a cikin masana'antar sinadarai, mai, da gas.

2. Manufacturing: Sarrafa layin sarrafawa, kayan aikin robot, sarrafa kayan aikin taro.

3. Tsarin Wutar Lantarki: Ikon Sauyawa, abubuwan da aka fitar na na'urar kariya, sauya wutar lantarki.

4. Sarrafa sufuri: Kula da hasken sigina, kula da ƙofar shinge, sarrafa kayan aikin dandamali.

5. Gina Automation: Gudanar da fan, kula da hasken rukuni, abubuwan tsarin tsaro.

   
   

---

6. Shawarwarin Zane da Amfani

1. Gudanar da Zazzabi & Muhalli: A cikin yanayin zafi mai ƙarfi, tabbatar da jimillar ƙirar yanzu bai wuce ƙimar ƙima ba don guje wa abubuwan da ke haifar da kariya saboda hauhawar zafin jiki.

2. Zanewar Samar da Wutar Lantarki: Ana ba da shawarar daidaita kayan wuta da kansa ga kowace ƙungiya kuma a yi amfani da aikin kula da wutar lantarki don faɗakar da kuskuren wutar da wuri.

3. Zaɓin Kebul: Yi la'akari da raguwar ƙarfin lantarki don watsa nisa mai nisa; yi amfani da igiyoyi tare da isassun yanki na giciye.

4. Ƙimar Kanfigareshan: Don aikace-aikacen da ke da babban buƙatun samun tsarin, ana ba da shawarar daidaitawa mai yawa tare da kunna hanyar haɗin yanar gizo.

5. Kulawa & Bincike: Ba da damar aikin Gwajin Pulse akai-akai da haɗa matsayin LED tare da bayanan gano tsarin don kiyaye tsinkaya.