Saukewa: GE DS200TCPSG1ARE

DS200TCPSG1ARE Hukumar Samar da Wutar Lantarki ( TCPS ) ce ta GE Energy a matsayin wani ɓangare na tsarin sarrafa injin turbine Mark V™ LM. Wannan kwamiti wani muhimmin sashi ne wanda ke canza ƙarfin 125 V dc daga ainihin Rarraba Wutar (Power Distribution core). ) cikin nau'ikan nau'ikan nau'ikan ƙarfin lantarki da ake buƙata ta tsarin dabaru, analog, da da'irorin sadarwa. Hukumar TCPS tana cikin R core (Control Engine) da kuma a cikin kowane nau'in I/O guda huɗu (, , , kuma ). Yana ba da ƙarfin da ake buƙata don allunan microprocessor, allon I/O, da sauran samfuran tsarin.

DS200TCPSG1ARE babban abin dogaro ne, allon wayoyi da aka buga wanda aka ƙera don ci gaba da aiki a cikin matsanancin yanayin masana'antu. Ya haɗa da topology mai canzawa DC-DC wanda ke tabbatar da tsayayyen ƙarfin fitarwa koda lokacin shigar da shigar ya bambanta tsakanin kewayon da aka ƙayyade. Hukumar ta ƙunshi ginanniyar bincike-bincike da kariyar fuse don kowane tashar jirgin ƙasa mai fitarwa, kuma tana ba da sanarwar matsayin samar da wutar lantarki zuwa tsarin sa ido kan gano cutar. Ƙaƙwalwar ARE tana nuna ƙayyadaddun bita da tsarin masana'anta wanda ke kula da cikakkiyar dacewa ta baya tare da duk tsarin Mark V LM yayin haɗa sabbin kayan haɓaka ƙira.

This board is essential for providing clean, isolated power to the various cores and ensures proper operation of the control system's processor boards, I/O boards, and communication interfaces.

Bayanin Aiki

DS200TCPSG1ARE yana karɓar ƙarfin shigarwar 125 V dc daga hukumar TCPD a cikin core via connector J1. A ciki, yana amfani da mai sarrafa buck-regulator da turawa mai juyawa don samar da ƙarfin fitarwa da yawa. Mai sarrafa buck-regulator yana saukar da shigarwar 125V dc zuwa matsakaicin 50V dc, wanda sannan ana ciyar da shi zuwa inverter na tura-pull. Mai jujjuyawar yana amfani da na'ura mai canzawa don samar da keɓance mai ƙarfi tsakanin tushen shigarwa da abubuwan da ake fitarwa, yana tabbatar da aminci da kariya ta amo. Ana rarraba wutar lantarkin fitarwa zuwa alluna daban-daban a cikin ainihin ainihin su.

Hukumar TCPS tana ba da abubuwan da aka tsara masu zuwa:

• + 5 V dc - don dabaru na dijital da da'irori microprocessor.

• ± 15 V dc - don kwandishan siginar analog da masu canza A/D.

• + 24 V dc – don relay coils, lamba bayanai, da sauran na'urorin filin.

• ± 24 V dc - don na'urori na waje kamar magoya baya, de-excitation module, crowbar, da ƙarfin wutar lantarki / kayayyaki na yanzu (ta hanyar jirgin baya na EPBP).

• Keɓe +70 V dc – don lamba jika a kan tasha alluna (misali, EXTB, ECTB).

• keɓe 20V ac - don tuƙin ƙofar IGBT da allon fitarwa mai ƙarfi.

• ± 55 V dc - don da'irori mai gano ƙasa (a kan katin zaɓin EROC).

Hakanan hukumar ta ƙunshi wuraren gwaji da yawa (TP) don tabbatar da ƙarfin fitarwa yayin magance matsala. Ana kiyaye abubuwan da aka fitar ta hanyar fuses (FU1-FU4 akan hukumar TCPS) kuma ana kula da su ta tsarin sarrafawa don wuce gona da iri, ƙarancin wutar lantarki, da asarar yanayin wutar lantarki. Koren LED a kan allo yana nuna cewa fitarwar 28 V dc tana nan (lokacin da aka yi amfani da shi a cikin ainihin R1 , TCPS tana ba da hukumar TCDA a cikin ƙirar dijital).

A cikin gine-ginen Mark V LM, kowane I/O core yana da nasa allon TCPS, wanda ke iko da STCA, TCQA, TCQC, da sauran alluna a cikin wannan cibiya. Hukumar TCPS a cikin R core tana ba da ikon UCIB motherboard, LBC586P CPU board, PANA ARCNET direba, da TCSA man skid interface board. A cikin ainihin R5 , TCPS kuma tana ba da ikon allunan analog na TCCA da TCCB.

DS200TCPSG1ARE ba za a iya daidaita shi ba; babu masu tsalle-tsalle na hardware ko saitunan software akan wannan allo. An ƙera shi don aiki mai sauƙi-da-wasa. Lokacin da hukumar TCPS ta gaza, dole ne a maye gurbinsa da wani bita iri ɗaya (ko mai dacewa daga baya) don tabbatar da daidaitattun matakan wutar lantarki da matakan fitarwa.

Halayen Hardware

Factor Form na Jiki da Hauwa

DS200TCPSG1ARE faifan wayoyi ne da aka buga wanda ya dace da tsarin sigar Mark V LM 6U Eurocard. An ƙera shi don saka shi a cikin ramin da aka keɓe (yawanci wuri 5) a cikin kowane kejin kati. An amintar da allon ta skru na fuska kuma ya haɗa da shafuka masu fitar da wuta don cirewa cikin sauƙi. Matsakaicin girmansa sune kwatankwacin allon Mark VI/O.

Masu haɗawa

Abubuwan Gwaji

DS200TCPSG1ARE ya haɗa da wuraren gwaji da yawa (TP) don auna ƙarfin fitarwa (koma zuwa Tebu 3-2 a cikin takaddun Mark V LM). Mahimman wuraren gwaji sun haɗa da:

• TP-P15 - +15 V dc fitarwa

• TP-N15--15V dc fitarwa

• TP-+5V- +5V dc fitarwa

• TP-DCOM - Digital gama gari (ƙasa don fitarwa na dijital)

• TP-+24V - +24V dc fitarwa (ba a kayyade, tacewa)

• TP--24V - -24V dc fitarwa (ba a kayyade)

Lura: Haƙiƙanin nadi na iya bambanta tare da sake fasalin allo.

LED Manuniya

DS200TCPSG1ARE yana da koren LED (wanda aka saba yiwa lakabi da 'P28 OK' ko makamancin haka) wanda ke nuna kasancewar fitarwar 28 V dc (an yi amfani da coils na relay da sauran filayen filin). Koyaya, a cikin aikace-aikacen Mark V LM, babban nunin iko mai kyau galibi ana bayar da shi ta LEDs matsayi na hukumar TCPD.

Fuses

Hukumar tana da fuses da yawa (FU1-FU4) waɗanda ke kare hanyoyin fitarwa. Ana bayar da kimarsu da lambobin kasidar masu siyarwa a cikin Karin bayani na E na littafin Mark V LM. Don hukumar TCPS:

Shigarwa da Sauyawa

Karɓar Kariya

• Hankali a tsaye - DS200TCPSG1ARE ya ƙunshi abubuwan da suka dace. Koyaushe sanya madaurin ƙasan wuyan hannu kuma riƙe allo a wurin aiki mai tushe. Ajiye allo a cikin jakar antistatic lokacin da ba a amfani da shi.

• Ƙarfafa ƙarfi kafin sarrafawa - Kashe wuta zuwa ainihin (ta amfani da maɓalli mai dacewa akan allon TCPD a cikin core) da kuma tabbatar da sifirin wutar lantarki kafin a taɓa allon ko kowane igiyoyi masu alaƙa. Bi duk hanyoyin kulle-kulle/tag-fitarwa.

• Kar a saka ko cirewa tare da amfani da wutar lantarki - Yin hakan na iya haifar da lalacewar kayan aiki ko rauni na mutum.

Hanyar Sauyawa

1. Kashe tushen kuzari inda aka shigar da DS200TCPSG1ARE.

2. Bude kofar majalisar kuma gwada wutar lantarki sifiri.

3. Lakabi kuma cire haɗin duk igiyoyi daga allon TCPS (J1, 2PL, JP1/JP2, JC, da X1 idan akwai).

4. Sake sama da ƙasa skru ɗin da aka kama kuma yi amfani da shafuka masu fitarwa don kwance allon allon.

5. Cire allo daga kejin katin.

6. Kafin shigar da allon maye, tabbatar da cewa duk fuses (FU1-FU4) ba su da kyau kuma hukumar ba ta da lahani na jiki.

7. Zamar da maye gurbin DS200TCPSG1ARE cikin daidai ramin (wuri na 5 a cikin ainihin) kuma latsa da ƙarfi don zaunar da shi.

8. Matse fuskar farantin karfe daidai gwargwado.

9. Sake haɗa duk igiyoyi a cikin tsarin baya.

10. Dawo da wuta zuwa ainihin kuma tabbatar da cewa koren LED (idan akwai) yana haskakawa kuma tsarin sarrafawa yana ba da rahoton rashin ƙararrawar gano wutar lantarki.

Bayanin oda

Lokacin yin odar DS200TCPSG1ARE, yi amfani da cikakken lambar ɓangaren daidai kamar yadda aka nuna. Lambar ɓangaren tana biye da yarjejeniyar GE:

• DS200 - Jerin Drive / Sarrafa.

• TCPS – Gagarumin aiki: Hukumar Samar da Wuta.

• G1 - Generation/Sigar.

• A - Mai tsara tushe.

• R - Mai gyara (misali, shafi, bambancin sashi, ko tsari na musamman).

• E - Bita E.

Garanti da Sanya oda

• Maye gurbin garanti (a cikin lokacin garanti): Tuntuɓi GE Energy Post Sales Service.

• Kayayyakin kayan gyara ko oda mara garanti : Tuntuɓi GE Sales ko Ofishin Sabis mafi kusa. Samar:

  • Cikakken lamba: DS200TCPSG1ARE

  • lambar serial na tsarin sarrafa turbine

  • Lambobin Lissafi (ML).

Lura: Duk lambobi da haruffa a cikin lambar ɓangaren suna da mahimmanci. GE na iya musanya bita mai dacewa daga baya, amma an tabbatar da dacewa da baya.

Bincike da Kulawa

DS200TCPSG1ARE baya buƙatar daidaitawa na yau da kullun. Koyaya, ana ba da shawarar duba ƙarfin fitarwa na lokaci-lokaci ta amfani da wuraren gwaji, musamman bayan laifin samar da wutar lantarki. Tsarin sarrafawa (ta ToolboxST) yana ba da ƙararrawa na bincike don:

• Asarar shigarwar 125V dc.

• Fuse gazawar a kan kowane fitarwa dogo.

• Ƙarfin-ƙarfin ƙarfin lantarki ko yanayin ƙarancin ƙarfin lantarki akan kowane fitarwa da aka tsara.

• Yanayin zafin jiki (idan hukumar TCPS ta kula da shi).

Idan kowane irin ƙarfin lantarki yana waje da kewayon sa, maye gurbin allo nan da nan. Ana iya maye gurbin fis ɗin a cikin filin, amma idan fuse ya sake busawa akai-akai, ya kamata a maye gurbin allon saboda za a iya samun gajeriyar kewayawa a cikin kaya ko gazawar wutar lantarki da kanta.