GE DS200DTBDG1A Ƙaddamarwar Ƙarshen Ƙarshen Lantarki

DS200DTBDG1A Tuntuɓar Fitarwar Ƙarshen Ƙarshen Ƙa'idar Ƙaƙƙarfan Ƙaƙwalwar Ƙaƙwalwar Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwallon Ƙwallon Ƙwallon Ƙwallon Ƙwallon Ƙwallon Ƙwallon Ƙwallon Ƙasa ta Ƙaddamarwa ta Ƙaddamarwa ta SPEEDTRONIC Mark V LM ya yi. Yin hidima azaman kari da haɓakawa zuwa aikin module na DTBC, tsarin DTBD yana taka muhimmiyar rawa a matsayin 'tashar aiwatar da umarni' da 'faɗaɗɗen mu'amalar wutar lantarki' a cikin Ramin 9 na dijital I/O cores (, , ). Yana da alhakin haɗa saiti na biyu na abubuwan fitarwa na 30 na relay na TCRA a cikin Ramin 5, dogaro da jujjuya ƙa'idodin ƙa'idodin dabaru daga tsarin sarrafawa zuwa siginar sarrafa iko mai ƙarfi waɗanda ke iya tuki na'urori daban-daban na filin kamar su solenoid bawul, lambobin sadarwa, fitilun nuna alama, da masu canza wuta.

A cikin hadadden tsarin sarrafawa da dabaru na kulle-kulle na injin turbin gas, ana buƙatar ɗimbin wuraren fitarwa don sarrafa farawa/tsayawa da sauyawa na tsarin taimako (misali, famfunan mai na lube, magoya bayan sanyaya, bawul ɗin magudanar ruwa, magoya bayan iska). Tsarin DTBD yana faɗaɗa ƙarfin fitarwa na dijital da kuma fitar da sassaucin tsarin sarrafawa ta hanyar babban madaidaicin madaidaicin madaidaicin sa da damar daidaita kayan masarufi. Ba madaidaicin wurin ba ne kawai don umarnin sarrafawa ba har ma, ta hanyar ƙira mai tunani, yana ba da jeri na zaɓi don duka busassun busassun abubuwan fitar da busassun busassun kayan aikin bawul ɗin solenoid mai sarrafa kansa. Yana ba da ingantacciyar mafita don buƙatu daban-daban na masu kunna aikin filin, wakiltar mahimman hanyar haɗin kayan masarufi da tabbatar da ingantaccen kuma amintaccen aiwatar da shirye-shiryen sarrafa tsarin naúrar.

2. Ayyukan Samfurin da Features

2.1. Babban Ayyuka

A matsayin siginar sigina kawai da allon mu'amalar wutar lantarki, manyan ayyuka na DS200DTBDG1A module sune canjin sigina, rarrabawa, da daidaitawar wutar lantarki:

• Fadada Tashar Fitowar Dijital: Yana ba da haɗin kai tsaye don tashoshi 30 na abubuwan dijital (daidai da relays K31-K60 akan allon TCRA a cikin Ramin 5). Ana amfani da waɗannan tashoshi don sarrafa na'urori masu yawa a cikin tsarin taimakon injin turbin gas.

• Kanfigareshan Mode Mai Sauƙi Mai Sauƙi: Wannan shine ainihin ƙimar DTBD. Ta hanyar masu tsalle-tsalle, masu amfani za su iya saita yanayin aiki guda biyu don fitowar 16 na farko (tashoshi #31 zuwa #46):

• Yanayi mai bushewa (Relay): Tare da cire masu tsalle-tsalle, abin da ake fitarwa shine lambobi masu wucewa kawai na relay (Buɗewa kullum, An rufe Kullum, Na gama gari). Ana ba da wutar lantarki don na'urar filin a waje; DTBD ne kawai ke da alhakin sauyawa iko. Dace da tuƙi lamba coils, karin relays, ko matsayi masu nuni da cewa suna da nasu wutar lantarki.

• Yanayin Wet Contact (Solenoid) Yanayin: Lokacin da madaidaicin Px/Mx jumper biyu (misali, P1/M1) aka saka su duka, an saita tashar fitarwa don yanayin tuƙi na solenoid. A cikin wannan yanayin, 125 V DC ikon daga hukumar TCPD a cikin Ana gabatar da core ta hanyar haɗin J8 kuma ana amfani da shi kai tsaye tsakanin Maɗaukaki da Buɗaɗɗen tashoshi na wannan tashar fitarwa. Lokacin da gudun ba da sanda ya ba da kuzari, wutar lantarki ta 125 V DC tana motsa bawul ɗin solenoid kai tsaye, yana kawar da buƙatar samar da wutar lantarki ta waje. Wannan yana sauƙaƙa sauƙaƙan wayoyi na bawul ɗin solenoid sosai kuma yana haɓaka aminci.

• Ƙaddamar da Ƙaddamar da Ƙaddamar da Ƙarfafa Ƙarfafawa: Yana ba da tashoshi na musamman guda biyu (#47 da #48) waɗanda za a iya haɗa su ta hanyar haɗin J19 da J20 zuwa 120/240 V AC ikon daga cibiya. Waɗannan tashoshi guda biyu galibi ana keɓance su don amfani da su tare da masu canza wuta, masu iya samar da wutar lantarki kai tsaye da ake buƙata don kunna wuta. Wadannan tashoshi yawanci suna gajarta ta hanyar ma'aikata masu shigar da waya masu tsalle; don amfani, dole ne a cire waɗannan jumpers kuma an haɗa igiyoyin wutar lantarki na J19/J20 kamar yadda aka saba.

• Amintaccen Sigina da Ƙarfin Wuta: Ƙaddamar da haɗin gwiwa tare da 30 relays a kan hukumar TCRA a cikin Ramin 5 ta hanyar 8 high density connectors ( JS1 zuwa JS8 ), daidaitaccen taswirar matsayi na kowane relay zuwa tashar fitarwa mai dacewa.

2.2. Siffofin Zane

• Sassaucin Kanfigareshan Yanayin Dual-Mode: Haɗaɗɗen ƙirar jumper na P1/M1 zuwa P16/M16 shine ainihin ƙira. Yana ba injiniyoyi damar saita kowane wurin fitarwa akan rukunin yanar gizon da kansa dangane da nau'in na'urar da aka haɗa (ma'aikacin da ke buƙatar ƙarfin waje, ko bawul ɗin solenoid yana buƙatar ikon sarrafawa). Wannan ikon 'daidaita-kamar yadda ake buƙata' yana guje wa buƙatar ƙirar allo daban-daban don nau'ikan masu kunnawa daban-daban, sauƙaƙe ƙira, ƙira, da aiki & kiyayewa.

• Ƙarfin Karɓar Ƙarfin Ƙarfi: An ƙirƙira don tuƙi masu ɗaukar nauyi (misali, coils na bawul na solenoid). Lokacin da aka saita shi a yanayin solenoid, yana iya ɗaukar yanayin aiki na da'irar 125V DC cikin aminci. Ƙwararren J19/J20 na iya ɗaukar babban inrush na yanzu (har zuwa 15A AC) na masu canza wuta. Duk hanyoyin da ke da alaƙa ana kiyaye su ta fis masu zaman kansu a cikin cibiya.

• Share Rarrabewa da Lakabi: Tsararren toshewar tasha a bayyane yake tare da lambobi a jere. Yankin jumper yayi daidai da ɗaya-zuwa ɗaya tare da kowane tashar fitarwa kuma an yi masa alama a fili don hana kuskuren tsari. Abubuwan musaya na wutar lantarki na J19/J20 suna keɓancewa daban kuma an yi musu alama sosai, suna jaddada manufarsu ta musamman da yanayin ƙarfin ƙarfi.

• Haɗin dogaro mai ƙarfi: Yana amfani da tashoshi masu jujjuya matakin masana'antu da amintattun masu haɗin jirgi-zuwa-jirgi, tabbatar da kwanciyar hankali na haɗin lantarki na dogon lokaci a ƙarƙashin babban halin yanzu da yanayin sauyawa akai-akai. Dukkan siginar da hanyoyin wuta an inganta su don rage raguwar wutar lantarki da dumama.

• Kulawa da Ƙwararren Ƙwararru: Matsayin kowane tashar fitarwa an ƙaddara shi ta hanyar matsayin relay akan hukumar TCRA kuma ana iya sa ido ta hanyar tsarin sarrafawa ta HMI. Abubuwan fitarwa akan toshe tasha sun dace don auna filin ta amfani da multimeter don tabbatar da aiwatar da umarni.

3. Filin Aikace-aikace

A matsayin faɗaɗa masarrafar fitarwa ta dijital, aikace-aikacen DS200DTBDG1A module's aikace-aikacen sun rufe duk kayan taimako na injin turbine mai buƙatar atomatik ko sarrafa dabaru:

1. Sarrafa Tsarin Tsara Tsara: Yana sarrafa farawa / dakatarwa da kulle-kulle na kayan aikin taimako na maɓalli kamar tsarin mai na lube (manyan bututun mai / ƙarin famfo, masu dumama), tsarin isar da mai (famfon turawa, bawul ɗin wurare dabam dabam, bawul ɗin magudanar ruwa), da tsarin sanyaya & tsarin rufewa (masu sanyaya, magoya bayan iska).

2. Kunna Valve: Yana fitar da bawul ɗin matukin jirgi na solenoid don yawancin bawul ɗin huhu ko na ruwa. Waɗannan bawuloli suna sarrafa kunnawa/kashewa da ƙa'idodin ruwa masu aiki kamar mai, iska, ruwan sanyaya, da tururi, suna aiki azaman hanyar kai tsaye don aiwatar da dabarun sarrafawa. Yanayin fitarwa na solenoid mai daidaitawa na DTBD an yi shi don irin waɗannan lodi.

3. Ignition da Tsarin Kula da Harshen Harshe: Ƙaddamar da tashoshi na fitarwa na J19 /J20 AC kai tsaye suna ba da wutar lantarki kai tsaye zuwa manyan na'urorin wutar lantarki, wani muhimmin sashi na jerin wutar lantarkin gas. Hakanan yana iya sarrafa na'urori kamar mai gano harshen wuta yana share bawuloli na solenoid.

4. Alamar Matsayi da Ƙararrawa: Yana fitar da fitilun nuni, ƙahonin ƙararrawa, ko fa'idodin bayyanawa akan consoles masu sarrafawa, samar da masu aiki tare da ƙwarewar kayan aiki da bayanin ƙararrawa.

5. Sadarwar Waje da Haɗin kai: Yana ba da siginar busassun lamba ga shukar Tsarin Kula da Rarraba (DCS), tsarin Wuta & Gas (F&G), ko wasu tsarin ɓangare na uku don rahoton matsayin naúrar da haɗin kai na aminci na waje.

A cikin waɗannan aikace-aikacen, tsarin DS200DTBDG1A yana tabbatar da 'matakin ƙarshe' na dabarun sarrafawa za a iya aiwatar da shi da ƙarfi da dogaro, yana mai da software '1's da '0's zuwa 'Run' da 'Tsaya' kayan aikin filin.

4. Amfanin Samfur

1. Mahimman Ƙarfin Ƙarfafawa da Tasirin Kuɗi: Yana faɗaɗa ƙarin ƙarin abubuwan fitarwa masu inganci guda 30 a cikin iyakataccen sarari. Haɗe tare da tsarin DTBC a cikin Ramin 8, ainihin dijital guda ɗaya na iya samar da har zuwa maki fitarwa 60, biyan buƙatun raka'a masu rikitarwa don yawancin abubuwan dijital na dijital da guje wa babban farashi na ƙara ƙarin kayan masarufi.

2. Yanayin Fitarwa mara misaltuwa: Tsarin nau'in tsalle na Px/Mx yana ba da keɓancewar daidaitawa akan rukunin yanar gizo. Yayin ƙaddamar da aikin ko kuma daga baya gyare-gyare, sauyawa tsakanin 'bushe lamba' da 'rigar lamba (solenoid)' za a iya yin yanayin kawai ta hanyar daidaita masu tsalle-tsalle ba tare da canza wayoyi ko maye gurbin alluna ba, haɓaka aikin injiniya sosai da sassaucin ra'ayi.

3. Haɗe-haɗe Babban-Power Drive Capability: Kai tsaye yana haɗa 125 V DC da 120/240 V AC rarraba wutar lantarki, yana ba da damar aminci da amincin tuki na manyan abubuwan inductive (misali, bawul ɗin solenoid, ƙananan injina, masu wutan wuta). Wannan yana kawar da buƙatar samar da wutar lantarki mai hankali na waje da masu tuntuɓar juna, sauƙaƙe ƙirar tsarin da haɓaka amincin gabaɗaya.

4. Babban Dogaro da Tsaro: Duk iko yana zuwa daga karewa core, tare da kowane hanya yana da fuses masu zaman kansu. Lambobin sadarwa na injina ne, suna ba da juriya mai ƙarfi da keɓancewa mai kyau, guje wa haɗari kamar ɗigogi na yanzu ko ɓarna mai alaƙa da ƙaƙƙarfan bayanai na jiha. Share labeling da haɗe-haɗe ƙirar jumper yana hana kuskuren tsari.

5. Sauƙin Kulawa da Bincike: Ana iya auna matsayin fitarwa kai tsaye a toshe tasha. Ana iya sa ido akan kowane umarni mai dacewa na relay drive (da martani idan akwai) ta hanyar HMI, yana sauƙaƙe gano abubuwan da suka shafi sarrafa dabaru, kuskuren allo, ko na'urorin filin.

6. Daidaitawa da Modularity: A matsayin wani ɓangare na daidaitaccen ɗakin karatu na Mark V LM, DTBD yana fa'ida daga goyan bayan fasaha guda ɗaya, takaddun bayanai, da wadatar kayan gyara. Tsarinsa na yau da kullun yana ba da damar kulawa da sauri da sauƙi da sauyawa.

5. Shigarwa, Kanfigareshan, da Jagoran Kulawa

5.1. Shigarwa

• An shigar da tsarin DS200DTBDG1A a cikin Ramin 9 na , , tsakiya.

• Haɗin Wutar Wuta:

• Amintacce haɗa kebul na wutar lantarki na 125 V DC daga allon TCPD a cikin core zuwa J8 connector.

• Idan aikace-aikacen ya buƙaci, haɗa kebul na wutar lantarki 120/240 V AC daga allon TCPD zuwa masu haɗin J19 da J20 (Lura: a cikin core, waɗannan yawanci ba a haɗa su ba).

• Haɗin Kebul na Sigina: Yi amfani da kebul ɗin lebur ɗin da aka bayar don ƙulla haɗin JS1 ta hanyar JS8 a cikin kwasfa masu dacewa akan allon TCRA a cikin Ramin 5, mai da hankali kan daidaitawa.

• Wurin Na'urar Filin Waya: Haɗa igiyoyi daga masu kunna filin (solenoid valves, coils contactor, fitilu masu nuna alama, da sauransu) zuwa tashoshi masu dacewa akan toshe tashar ta kowane zane, banbance tsakanin Buɗaɗɗen Al'ada (NO), Rufe Aiki (NC), da na gama gari (COM).

5.2. Kanfigareshan Hardware (Mahimmin Mataki)

Dole ne a yi wannan saitin tare da kashe wutar tsarin kuma yana tasiri kai tsaye aiki da aminci na kayan aiki.

• Zaɓin Yanayin Tuntuɓar Solenoid/ bushe (P1/M1 zuwa P16/M16):

• Don saita tashar don Yanayin Solenoid (Wet Contact): Nemo Px da Mx masu tsalle biyu don wannan tashar kuma saka duka biyun. Misali, don saita tashar #31 don fitar da solenoid, duka P1 da M1 jumpers dole ne a saka su.

• Don saita tashar don Yanayin Tuntuɓi Busassun: Tabbatar cewa Px da Mx masu tsalle biyu na wannan tashar an cire su duka.

• Dokar Zinariya: Don tashoshin daidaitawa guda 16 (#31-#46), Px da Mx dole ne su sami matsayi iri ɗaya (dukansu a ciki ko duka biyun). Samun daya a ciki da waje daya bai halatta ba.

• Dole ne saitin saiti ya dogara ne akan zane-zanen wayoyi na ƙarshe da lissafin I/O, yana bayyana a sarari nau'i da buƙatun ƙarfin na'urar ta kowane wurin fitarwa.

• Kanfigareshan Tashar Taswira mai kunna wuta:

• Tabbatar cewa J19 da J20 suna da alaƙa daidai da igiyoyin wutar AC.

• Bincika idan an cire masu tsallen waya masu shigar da masana'anta don tashoshi #47 da #48 bisa ga umarnin shigarwa.

• Waɗannan tashoshi biyu yawanci suna da ƙayyadaddun dalilai kuma basa buƙatar daidaitawar P/M jumper.

5.3. Ƙungiyar Software

• DS200DTBDG1A kanta ba shi da tsarin software. Duk da haka, kowane tashoshi na fitarwa yana da sunan siginar software na musamman (misali, L31 , L32 ) a cikin software na tsarin sarrafawa (CSP - Shirye-shiryen Sarrafa Sarrafa).

• A kan HMI, masu aiki zasu iya duba matsayi (GASKIYA/KARYA) na waɗannan sigina, watau umarnin da mai sarrafawa ya bayar. Hakanan ana iya lura da matsayin tuƙi na relays na hukumar TCRA ta hanyar kayan aikin DIAGC.

5.4. Kulawa da Gyara matsala

• Rigakafin Rigakafi: Lokaci-lokaci bincika maƙarƙashiyar sukurori; duba ingancin lambar sadarwar jumper don sako-sako; tsaftace module surface.

• Shirya matsala:

• Fitowa Guda Daya Baya Aiki:

• Abubuwan Fitarwa da yawa Mara kyau: Duba ikon hukumar TCRA, masu haɗin bas na JS , ko haɗin wutar lantarki na gama gari ( J8 , J19/J20 ).

• Sauyawa Module: Kafin maye gurbin DTBD, yi rikodin a sarari ko ɗaukar hoto matsayin duk masu tsalle-tsalle da wayoyi na J8 , J19 , J20 . Bayan shigar da sabon allon, mayar da komai daidai kamar da. Bayan maye gurbin, tabbatar da aikin abubuwan da ke da alaƙa.

1. Duba HMI: Tabbatar da siginar dabaru na sarrafawa don abin fitarwa yana aiki (GASKIYA).

2. Ma'aunin filin (tare da kashe wuta): A toshe tashar tashar DTBD, auna ci gaban da'irar fitarwa lokacin da ya kamata a sami kuzarin relay. Idan ba'a rufe lambobin sadarwa na relay ba, batun na iya kasancewa sama (sake yin relay na TCRA, kebul na haɗin JS , ko siginar sarrafawa).

3. Duba Kanfigareshan: Idan tashar tana iya daidaitawa (#31-#46), tabbatar da saitin jumper Px/Mx daidai ne. Idan ya kamata ya zama yanayin solenoid amma masu tsalle suna waje, na'urar filin ba ta da iko. Idan ya zama bushewar lamba amma masu tsalle suna cikin kuskure, zai iya haifar da matsalolin da ba a yi niyya ba.

4. Duba Power: Don yanayin solenoid, auna ƙarfin lantarki a shigar da J8 . Don tashoshin wutar lantarki, auna ƙarfin lantarki a J19 /J20.

6. Kariyar Tsaro

• Babban Haɗin Wutar Lantarki: Tsarin DS200DTBDG1A yana sarrafa 125 V DC kuma har zuwa 240 V AC ƙarfin lantarki, ya isa ya haifar da girgizar wutar lantarki mai tsanani. Haɗin J8 , J19 , J20 da madaidaitan tashoshin fitarwa na iya zama mai ƙarfi lokacin da mai sarrafawa ke aiki. Duk aikace-aikacen shigarwa, daidaitawa, da wayoyi dole ne a yi su kawai bayan an cire mai sarrafawa gaba ɗaya kuma ana bin hanyoyin Kulle/Tagout (LOTO).

• Load Matching: Tabbatar da na'urorin filin da aka haɗa (musamman bawuloli na solenoid da masu canza wuta) suna da ƙimar ƙarfin lantarki, halin yanzu, da nau'in kaya (inductive/resistive) waɗanda suka dace da iyawar tuntuɓar sadarwa da aka kayyade a cikin Table 6-3. An haramta yin lodi fiye da kima, saboda yana iya ƙone lambobin sadarwa ko haifar da gobara.

• Daidaitaccen Kanfigareshan Yana da Muhimmanci: An haramta shi sosai don haɗa na'urar da ke buƙatar ƙarfin waje (bushewar nauyin lamba) zuwa tashar fitarwa wanda Px/Mx jumpers. kuskuren shigar Wannan zai haifar da rikici tsakanin tushen wutar lantarki na waje da wutar lantarki na 125V DC na ciki, mai yuwuwar lalata kayan aiki, kona masu tsalle, ko haifar da ɗan gajeren kewayawa. Dole ne mutane biyu su bincika saiti akan zane.

• Haɗari na Musamman na Canjin wuta: Masu wutan lantarki suna aiki a babban ƙarfin wuta. Dole ne wayoyi masu haɗin haɗin su su kasance suna da kyawawa mai kyau, kuma a tabbatar an fitar da da'irar gabaɗaya yayin kulawa.

• Grounding and Insulation: Tabbatar cewa an kafa shingen ƙarfe na na'urar filin kamar yadda ake buƙata. Lokacin aunawa ko sabis, yi amfani da keɓaɓɓun kayan aikin don hana gajerun kewayawa.