Kuna nan: Gida » Tsarukan aiki » Kulawar Turbine » Mark VIe Control System GE IS220PPDAH1A PPDA Rarraba Wutar I/O

Kashi na samfur

Kayayyakin Bazuwar

Bent Nevada 3500/33 149986-01 Module Relay Channel 16

Bent Nevada 3500/33-01-00 16-Module Relay Channel

GE IS220YTURS1A Babban Kariyar Turbine Mahimmanci I/O Kunshin

GE IS200VTURH2B VTUR Babban Gudanarwa

ABB CI854AK01 3BSE030220R1 Sadarwar Sadarwar Module

Saukewa: ABB PM861AK01 3BSE018157R1

ABB AO815 3BSE052605R1 Analog Fitar Module

ABB CI810B 3BSE020520R1 Module Sadarwar Sadarwar Filin Bus

CPUM 200-595-082-332 Katin CPU

EC119 922-119-000-003-P5000-U5000 Meggitt Cable Assembly

GE IS215ACLEH1B Module Control Layer na Aikace-aikacen

GE IS200TBTCH1C Thermocouple Input Board

GE IS200EPDMG1A Exciter Rarraba Wutar Lantarki

GE IS200EPSMG2A Exciter Power Supply Module

Saukewa: GE IS210AEPSG1B

Saukewa: GE IS215UCVEM01A

Saukewa: GE DS200DCFBG2B

330101-00-12-05-02-05 Eddy Binciken Yanzu

330101-00-12-10-02-00 Daidaitaccen Binciken Eddy na Yanzu

330101-00-40-10-02-05 Daidaitaccen Binciken kusanci

330105-02-12-10-02-05 Binciken Kusa da Dutsen Juya

GE IS220PPDAH1A PPDA Rarraba Wutar I/O Kunshin

GE IS220PPDAH1A PPDA Rarraba Wutar I/O Kunshin

Alamar:
GE
Abu A'a:
Saukewa: IS220PPDAH1A
Farashin:
$5000
Lokacin Bayarwa:
A Stock
Biya:
T/T
Tashar Jirgin Ruwa:
Xiamen

Yawan:
samuwa:





Tambaya Ƙara zuwa Kwando

IS220PPDAH1A Fakitin Binciken Wuta ne na I/O wanda aka tsara musamman don tsarin sarrafa Mark VIe da Mark VeS. Yana aiki azaman ra'ayi na tsakiya da sashin kulawa don Module Rarraba Wutar Lantarki (PDM), alhakin tattarawa, sarrafawa, da bayar da rahoton matsayin aiki na dukkan tsarin wutar lantarki. Wannan tsarin yana tattara mahimman bayanai kamar ƙarfin wutar bas ɗin wuta, matsayin da'irar reshe, gano kuskuren ƙasa, da yawan lafiyar wutar lantarki.

An sanye shi da allon sarrafa na'urar BPPB, IS220PPDAH1A yana sadarwa ta hanyar sadarwa ta Ethernet mai sau biyu (IONet) zuwa masu sarrafawa. Yayin da ya kai ƙarshen rayuwarsa kuma IS220PPDAH1A ya maye gurbinsa (wanda ke da na'ura mai sarrafa BPPC), IS220PPDAH1A ya kasance muhimmin sashi a yawancin shigarwar da ake da su, yana tabbatar da babban dogaro da sa ido kan tsarin lokaci.

2. Mabuɗin Ayyuka

Matsayin Tsarin Wutar Lantarki: IS220PPDAH1A na iya karɓar ra'ayi daga allon rarraba wutar lantarki har zuwa shida (JPDx), saka idanu:

Power Bus Voltages: 28V DC iko iko, 125V DC ikon baturi, 24/48V DC ikon, da 100-250V AC shigar da ikon.
Matsayin da'irar reshe: Matsayin fiɗa, matsayi mai sauyawa, da ingancin kewaye da fitarwa.
Gano Laifin ƙasa: Yana gano kurakuran a cikin tsarin DC masu iyo ta hanyar sa ido kan kashe wutar lantarki daga ƙasa.
Lafiyar Samar da Wutar Lantarki mai yawa: Yana karanta busassun sigina na matsayin lamba daga kayan wuta na waje.

Lantarki Identification & Auto-Configuration: Module yana amfani da layin ID na lantarki don gano nau'i da bita ta atomatik kowane allon JPDx da aka haɗa. Wannan ikon 'toshe-da-wasa' yana ba PPDA damar
cika sararin siginar IONet daidai ba tare da sake daidaitawa ta hannu ba.
Sadarwar Sadarwar Ethernet Dual-Redundant: Tashoshin tashar Ethernet guda biyu suna ba da hanyoyin sadarwa da yawa zuwa cibiyoyin sadarwar R, S, da T, suna tabbatar da ci gaba da ba da rahoton bayanai ko da hanyar haɗin yanar gizo ɗaya ta gaza.
Alamar Matsayi ta LEDs: Fannin gaba yana fasalta LEDs 24 waɗanda ke ba da taƙaitaccen taƙaitaccen gani na lafiyar tsarin wutar lantarki, gami da ƙa'idar bas ɗin wuta, matsayin tushe, ƙarfin baturi / ƙasa, da wuraren ƙararrawa masu daidaitawa.
Cikakkun Bincike: IS220PPDAH1A na yin gwaje-gwajen kai da yawa, gami da gwaje-gwajen wutar lantarki (RAM, Flash, Ethernet, hardware hardware), ci gaba da sa ido kan samar da wutar lantarki na ciki, da ingantaccen shigar da kebul na analog. Duk siginar bincike ana samun dama kuma ana iya sarrafa su ta aikace-aikacen ToolboxST.

3. Ka'idar Aiki

Shigar da Siginar Siginar & Gudanarwa: IS220PPDAH1A yana haɗawa zuwa allon mai watsa shiri (JPDS, JPDM, JPDG, ko JPDC) ta hanyar haɗin mai-pin 62. Kowane allon JPDx da aka haɗa yana ba da 'ƙungiyar martani' guda ɗaya wanda ya ƙunshi ƙasa ra'ayi, siginar analog guda biyar, da layin ID. PPDA tana karanta siginar analog daban-daban don tabbatar da babban rigakafi ga amo-yanayin gama gari.
Kayan aikin ID na Lantarki: Layin ID a cikin kowane rukunin martani yana ba PPDA damar gano nau'in allo. Dangane da wannan ganewar, IS220PPDAH1A tana aiwatar da madaidaicin dabarar fassarar sigina, tana ba da damar haɗin kai ta atomatik.
Canza siginar Analog & Ƙarfafa Ƙararrawa: Mai canza siginar analog-zuwa-dijital 16-bit yana yin siginar shigarwa. Firmware na IS220PPDAH1A yana kwatanta waɗannan ƙimar da madaidaitan madaidaitan mai amfani (misali, juriya na ƙarfin lantarki, abubuwan da ke haifar da lahani na ƙasa) don samar da ƙararrawa da aka ruwaito ga mai sarrafawa ta hanyar IONet.
Jawabin Daisy-Chain: IS220PPDAH1A dole ne a shirya shi a kan babban allo kuma dole ne ya zama ƙarshen sarkar daisy-chain. An haɗa sauran allon mahimman bayanai a jere ta hanyar amfani da igiyoyin ribbon-pin 50 daga mahaɗin P2 zuwa mai haɗin P2 na gaba na gaba, yana ƙarewa a mai masaukin IS220PPDAH1A.

4. Shigarwa & Kanfigareshan

Matakan Shigarwa:

Amintacce haša hukumar tasha mai masaukin baki (misali, JPDS, JPDC).
Kai tsaye toshe fakitin IS220PPDAH1A I/O cikin mahaɗin hukumar JA1.
Tsare kayan aikin I/O ta hanyar amfani da zaren zaren da madaurin hawa don hana damuwa akan mahaɗin.
Haɗa igiyoyin Ethernet ɗaya ko biyu (ENET1 yawanci zuwa cibiyar sadarwar R).
Haɗa wutar lantarki; fakitin yana goyan bayan toshe zafi tare da iyawar farawa mai taushi.
Yi amfani da igiyoyin kintinkiri zuwa daisy-sarkar sauran alluna masu mahimmanci daga mahaɗin P2 zuwa mahaɗin P2 na hukumar.

ToolboxST Kanfigareshan: Key sanyi sigogi sun hada da PS28vEnable (28V feedback taimaka), InputDiagEnab (input diagnostic kunna), DC_125v_Trig_Volt (125V DC kuskure jawo ƙarfin lantarki), Gnd_Mag_Trig_Volt (ƙasa kuskuren kunna wutar lantarki), da FuseDiagfuse (Diagfuse).

Ƙayyadaddun Rukuni

Gabaɗaya

Sunan samfur IS220PPDAH1A Kunshin I/O Diagnostic Power

Tsarin Target Mark VIe, Mark VeS Control Systems

Aiki na Farko Bayanin Rarraba Wutar Lantarki da Kulawa

Halayen Lantarki

Wutar lantarki mai aiki 28V DC ± 5% (An kawo ta wurin mai watsa shiri ta hanyar haɗin DC-62)

Yawan Amfani da Wuta 5.3 W

Amfanin Wutar Lantarki Mafi Muni 6.2 W

Kariyar wutar lantarki An shirya shi ta hanyar fuse mai sake saitin kansa na polysilicon akan allon mai masaukin (ƙididdigar 0.5A @ 20°C, wanda aka lalata zuwa 0.28A @ 70°C).

Analog Input Channels Har zuwa abubuwan shigarwa guda 30 masu ƙarewa guda (ƙungiyoyin ra'ayoyin 6 x tashoshi 5 kowace ƙungiya)

Analog Input Resolution 16-bit Analog-to-Digital Converter (ADC)

Hanyar Sauraron Shigarwa Ma'auni daban-daban dangane da batun Fdbk_Ground na ƙungiyar.

Layin ID Layuka 2 a kowace ƙungiyar amsawa (sigina da ƙasa) don tantance allon allo.

Sadarwar Sadarwa 2 x 10/100 Mbps Ethernet tashar jiragen ruwa (RJ-45), haɗin IONet mai sau biyu.

Daidaituwar shigarwa/Mayar da martani

Gudun Runduna (tare da PPDA) JPDS, JPDM, JPDG, JPDC

Allolin mayar da martani masu jituwa JPDB (AC), JPDE (24/48V DC), JPDF (125V DC)

Matsakaicin adadin Alloli Yana goyan bayan ƙungiyoyin martani har zuwa 6 gabaɗaya. Haƙiƙanin adadin allunan da aka haɗa sun dogara da nau'in mai watsa shiri:
- Mai watsa shiri na JPDS: +5 allon taimako (yana amfani da rukunin 1)
- Mai watsa shiri na JPDM: +4 allunan taimako (yana amfani da ƙungiyoyi 2)
- Mai watsa shiri na JPDC: +4 allo allo (yana amfani da ƙungiyoyi 2)
- JPDG Mai watsa shiri: +3 ƙungiyoyin taimako3)

Jiki & Makanikai

Girma (H x W x D) 8.26 cm x 4.19 cm x 12.1 cm (3.25 a cikin x 1.65 a x 4.78 a)

Mai Haɗin Farko 62-pin D-Sub (DC-62) don karbar bakuncin allon (ikon, amsawa, ID).

Masu Haɗin Sadarwa 2 x Ethernet RJ-45.

Yin hawa Haɗa kai tsaye cikin mahaɗin JA1 na hukumar masauki kuma an kiyaye shi tare da madaidaicin kusurwa da ƙwaya a kan kafaffen sanduna.

Fasaha Fasahar Dutsen Surface (SMT)

Muhalli

Yanayin Aiki PPDA H1A: -30°C zuwa +65°C (-22°F zuwa +149°F)

Ajiya Zazzabi -40°C zuwa +85°C (-40°F zuwa +185°F)

Danshi na Dangi 5% zuwa 95%, ba condensing

Tsayi An ƙididdige don aiki har zuwa mita 2000.

Degree Pollution An ƙirƙira don mahalli na Digiri na 2 (a kowace IEC 60664-1).

Bincike & Manuniya

LED Manuniya 24 LEDs na gaban-panel (23 Yellow, 1 Red ' Laifi' LED).

Maɓallin Ayyukan LED Pbus R/S/T Regulation, R/S/T Tushen Ok, 125V/24V Baturi Volts & Grounding, AC Input 1/2 Ok, Aux Fitar Ok, Aikace-aikace-kore (x4).

Binciken Kai Gwajin wutar lantarki (RAM, Flash, Ethernet, hardware), ci gaba da sa ido kan samar da wutar lantarki na ciki, ingantaccen shigarwar da'ira na analog ta hanyar daidaitattun nassoshi.

Software & Kanfigareshan

Software na Kanfigareshan Akwatin Kayan Aikin GEST

Mafi ƙarancin Sigar Software Gudanar da V04.07. Lura: An daina tallafawa fasalin Accelerometer farawa tare da ControlST V05.02.

Ma'aunin Kanfigareshan Ya haɗa da `PS28vEnable` , `InputDiagEnab` , `DC_125v_Trig_Volt` , `Gnd_Mag_Trig_Volt` , `ACFdbkInVoltage` , `FuseDiag` , da dai sauransu.

Ƙayyadaddun	Rukuni
Gabaɗaya
Sunan samfur	IS220PPDAH1A Kunshin I/O Diagnostic Power
Tsarin Target	Mark VIe, Mark VeS Control Systems
Aiki na Farko	Bayanin Rarraba Wutar Lantarki da Kulawa
Halayen Lantarki
Wutar lantarki mai aiki	28V DC ± 5% (An kawo ta wurin mai watsa shiri ta hanyar haɗin DC-62)
Yawan Amfani da Wuta	5.3 W
Amfanin Wutar Lantarki Mafi Muni	6.2 W
Kariyar wutar lantarki	An shirya shi ta hanyar fuse mai sake saitin kansa na polysilicon akan allon mai masaukin (ƙididdigar 0.5A @ 20°C, wanda aka lalata zuwa 0.28A @ 70°C).
Analog Input Channels	Har zuwa abubuwan shigarwa guda 30 masu ƙarewa guda (ƙungiyoyin ra'ayoyin 6 x tashoshi 5 kowace ƙungiya)
Analog Input Resolution	16-bit Analog-to-Digital Converter (ADC)
Hanyar Sauraron Shigarwa	Ma'auni daban-daban dangane da batun Fdbk_Ground na ƙungiyar.
Layin ID	Layuka 2 a kowace ƙungiyar amsawa (sigina da ƙasa) don tantance allon allo.
Sadarwar Sadarwa	2 x 10/100 Mbps Ethernet tashar jiragen ruwa (RJ-45), haɗin IONet mai sau biyu.
Daidaituwar shigarwa/Mayar da martani
Gudun Runduna (tare da PPDA)	JPDS, JPDM, JPDG, JPDC
Allolin mayar da martani masu jituwa	JPDB (AC), JPDE (24/48V DC), JPDF (125V DC)
Matsakaicin adadin Alloli	Yana goyan bayan ƙungiyoyin martani har zuwa 6 gabaɗaya. Haƙiƙanin adadin allunan da aka haɗa sun dogara da nau'in mai watsa shiri: - Mai watsa shiri na JPDS: +5 allon taimako (yana amfani da rukunin 1) - Mai watsa shiri na JPDM: +4 allunan taimako (yana amfani da ƙungiyoyi 2) - Mai watsa shiri na JPDC: +4 allo allo (yana amfani da ƙungiyoyi 2) - JPDG Mai watsa shiri: +3 ƙungiyoyin taimako3)
Jiki & Makanikai
Girma (H x W x D)	8.26 cm x 4.19 cm x 12.1 cm (3.25 a cikin x 1.65 a x 4.78 a)
Mai Haɗin Farko	62-pin D-Sub (DC-62) don karbar bakuncin allon (ikon, amsawa, ID).
Masu Haɗin Sadarwa	2 x Ethernet RJ-45.
Yin hawa	Haɗa kai tsaye cikin mahaɗin JA1 na hukumar masauki kuma an kiyaye shi tare da madaidaicin kusurwa da ƙwaya a kan kafaffen sanduna.
Fasaha	Fasahar Dutsen Surface (SMT)
Muhalli
Yanayin Aiki	PPDA H1A: -30°C zuwa +65°C (-22°F zuwa +149°F)
Ajiya Zazzabi	-40°C zuwa +85°C (-40°F zuwa +185°F)
Danshi na Dangi	5% zuwa 95%, ba condensing
Tsayi	An ƙididdige don aiki har zuwa mita 2000.
Degree Pollution	An ƙirƙira don mahalli na Digiri na 2 (a kowace IEC 60664-1).
Bincike & Manuniya
LED Manuniya	24 LEDs na gaban-panel (23 Yellow, 1 Red ' Laifi' LED).
Maɓallin Ayyukan LED	Pbus R/S/T Regulation, R/S/T Tushen Ok, 125V/24V Baturi Volts & Grounding, AC Input 1/2 Ok, Aux Fitar Ok, Aikace-aikace-kore (x4).
Binciken Kai	Gwajin wutar lantarki (RAM, Flash, Ethernet, hardware), ci gaba da sa ido kan samar da wutar lantarki na ciki, ingantaccen shigarwar da'ira na analog ta hanyar daidaitattun nassoshi.
Software & Kanfigareshan
Software na Kanfigareshan	Akwatin Kayan Aikin GEST
Mafi ƙarancin Sigar Software	Gudanar da V04.07. Lura: An daina tallafawa fasalin Accelerometer farawa tare da ControlST V05.02.
Ma'aunin Kanfigareshan	Ya haɗa da `PS28vEnable` , `InputDiagEnab` , `DC_125v_Trig_Volt` , `Gnd_Mag_Trig_Volt` , `ACFdbkInVoltage` , `FuseDiag` , da dai sauransu.