ABB 07KT97 Basic Unit

ABB 07 KT 97 babban aiki ne na asali naúrar (CPU module) a cikin Advant Controller 31 tsarin sarrafa kai tsaye na hankali. Yana haɗa ƙarfin sarrafawa mai ƙarfi, wadatattun hanyoyin haɗin I/O, da zaɓuɓɓukan sadarwa masu sassauƙa. Yana iya aiki azaman babban tasha akan tsarin bas ɗin tsarin CS31 don gina tsarin sarrafawa mai ƙarfi, ko kuma zama tashar bawa mai hankali mai nisa ko mai sarrafa kansa. Yana da manufa core mai sarrafawa don saduwa da tsakiyar-zuwa-high-karshen masana'antu aiki da kai da bukatun aikace-aikace.

A matsayin daidaitaccen samfurin babban aiki a cikin wannan jerin, 07 KT 97 R0200 yana ba da har zuwa 480 kB na ƙwaƙwalwar ajiyar shirin mai amfani da 256 kB na ƙwaƙwalwar bayanan mai amfani. Yana haɗa dijital, analog, counter mai sauri, da hanyoyin sadarwa daban-daban, yana ba da damar haɗakar mai sarrafawa tare da siginar filin. Wannan yana rage dogaro ga samfuran haɓakawa na waje kuma yana haɓaka ƙarancin tsarin da aminci.

2. Core Features da Overview

2.1 Ƙarfin sarrafawa da ƙwaƙwalwa

• Ƙwaƙwalwar Shirin Mai amfani: 480kB Flash EPROM, yana goyan bayan dabarun sarrafawa masu rikitarwa.

• Ƙwaƙwalwar Bayanan Mai amfani: 256 kB don adana masu canjin tsari, girke-girke, da sauransu, tare da tallafin baturi.

• Gudun sarrafawa: Lokaci na yau da kullun na 0.3 ms/kB na shirin (65% umarnin bit, umarnin kalma 35%), yana tabbatar da saurin duba zagayowar shirin.

2.2 Abubuwan Haɗin I/O masu Arziki (misali: 07 KT 97 R0200)

• Abubuwan Shiga na Dijital (DI): Tashoshi 24, an raba su zuwa ƙungiyoyin 3 (tashoshi 8 kowannensu), tare da keɓancewar lantarki tsakanin ƙungiyoyi da kuma daga tsarin, suna goyan bayan siginar 24V DC.

• Abubuwan Dijital (DO): Fitar transistor 16, an raba su zuwa ƙungiyoyi 2 (tashoshi 8 kowanne), tare da keɓe tsakanin ƙungiyoyi. Kowane tashoshi yana da nauyin nauyin 0.5A, yana nuna gajeriyar kewayawa da kariyar lodi.

• Abubuwan Shiga/Sakamako na Dijital (DIO): tashoshi 8 masu daidaitawa waɗanda za'a iya saita su daidaiku ɗaya azaman abubuwan shigarwa, abubuwan fitarwa, ko abubuwan da za'a sake karantawa, haɗa su cikin keɓaɓɓen rukuni.

• Analog Inputs (AI): 8 babban madaidaici, abubuwan da za a iya daidaita su daban-daban. Ana iya saita kowace tasha da kanta zuwa:

• Shigar da wutar lantarki: 0…10V, 0…5V, ±10V, ±5V

• Shigarwa na yanzu: 0…20mA, 4…20mA

• Shigar da zafin jiki: Pt100 RTD (waya 2 ko 3-waya)

• Shigar da banbanci: Don ƙin yarda da hayaniyar yanayi

• Shigarwar dijital: Ana iya amfani da ita azaman abubuwan shigar dijital na 24V na yau da kullun.

• Analog Outputs (AO): 4 abubuwan da za a iya daidaita su da ke goyan bayan ± 10 V, 0…20 mA, 4…20 mA sigina.

2.3 Babban Haɗin Sadarwa da Ƙarfin Haɗin Intanet

• Interface CS31 System Bus Interface: Don haɗa Advant Controller 31 an rarraba nau'ikan I/O masu nisa (misali, 07 DC 92, 07 DI 92 da aka ambata a baya), wanda za'a iya faɗaɗawa har zuwa maki 992 dijital I/O maki ko tashoshi 224 na analog.

• Serial Interfaces: 2 masu zaman kansu RS-232 musaya (COM1, COM2) don tsara shirye-shirye, gyara kurakurai, haɗawa zuwa bangarori masu aiki, ko aiki azaman maigidan MODBUS/bawa.

• Hanyoyin Sadarwar Sadarwar Yanar Gizon Zaɓuɓɓuka: 07 KT 97 yana ba da nau'o'i daban-daban, zaɓin haɗa waɗannan manyan ayyuka na filin bas ko musaya na Ethernet na masana'antu don haɗin kai maras kyau tare da manyan cibiyoyin sadarwa ko na'urori na ɓangare na uku:

• PROFIBUS-DP: Mai yarda da ma'aunin EN 50170, yana iya aiki azaman maigida ko bawa.

• ARCNET: Don gina manyan cibiyoyin sadarwa masu ƙima.

• Ethernet: Yana goyan bayan 10/100Base-TX, TCP/IP, UDP/IP, Modbus TCP ladabi.

• CANopen: Mai yarda da ma'aunin ISO 11898, na iya aiki azaman jagora.

• Haɗin haɗin kai: Irin su Ethernet + PROFIBUS, ARCNET + PROFIBUS, da sauransu, suna ba da sassaucin haɗin gwiwa.

2.4 Ayyuka na Musamman da Abubuwan Na gaba

• Babban-Speed ​​Hardware Counter: Haɗaɗɗen ƙira mai sauri ta amfani da keɓaɓɓun tashoshi na shigarwa (E62.00, E62.01), matsakaicin ƙidayar ƙidayar 50 kHz, tana goyan bayan yanayin aiki mai daidaitawa 7 (misali, lokaci-ɗaya, mai rikodin quadrature, ma'aunin mitar), yana aiki da kansa ba tare da sake zagayowar PLC ba.

• Agogon Lokaci na Gaskiya: Haɗe-haɗen agogon kayan aiki don tambarin lokutan, ayyuka da aka tsara, da sauransu.

• Katin SmartMedia: Yana goyan bayan amfani da katin ƙwaƙwalwar ajiya na 07 MC 90 (2 MB ko 8 MB) don tallafawa shirye-shiryen / bayanai na mai amfani ko aiwatar da sabuntawar firmware, yana sauƙaƙe aikin kiyayewa da samarwa da yawa.

• Cikakken Bincike da Alamar Matsayi: Fannin gaban yana fasalta har zuwa LEDs 60, yana nunawa a sarari:

• Matsayin duk maki I/O na dijital (LEDs kore/rawaya).

• Wutar wuta, baturi, da matsayin gudu (RUN).

• Matakan kuskure (Kuskuren FK1 Fatal, FK2 Babban Kuskuren, Kuskuren Hasken FK3).

• Matsayin bas (BA Bus Active, BE/RE/SE Kurakurai Bus).

• Ƙararrawar juzu'i mai yawa / gajeriyar kewayawa.

• Riƙe bayanai: Ta hanyar ƙirar baturin lithium mai maye gurbin 07 LE 90 (rayuwa ta yau da kullun 5 shekaru) don kula da shirin mai amfani, bayanai, da agogo na ainihi a cikin RAM yayin asarar wutar lantarki.

3. Hardware Design da Connections

3.1 Tsarin Panel na Gaba da Abubuwan Aiki

An ƙera ɓangarorin gaba da hankali, yana haɗa duk masu nuna matsayi da ainihin abubuwan aiki:

• Wurin Toshe Tasha: Yana amfani da tubalan tasha mai cirewa don sauƙin wayoyi. An keɓe tasha a fili daidai da ƙungiyoyin I/O daban-daban.

• Yankin Nuni na LED: Fitillun matsayin I/O da aka tsara da yawa da fitilun yanayin tsarin.

• Gudanar da Aiki: RUN / STOP canzawa don farawa / dakatar da shirin mai amfani.

• Mashigai Sadarwa: COM1 da COM2 serial musaya.

• Ramin katin ƙwaƙwalwar ajiya: Don saka katin SmartMedia.

• Dakin Baturi: Anan a gefen ƙirar don shigar da baturin ajiyar waje.

3.2 Zane na Ware Wutar Lantarki

07 KT 97 yana amfani da ƙirar keɓewar lantarki na musamman, maɓalli ga babban amincinsa:

• Abubuwan Shiga na Dijital: Ƙungiyoyi 3 (maki 8 kowanne) keɓe daga juna kuma daga sauran tsarin.

• Abubuwan da aka samo na dijital: ƙungiyoyi 2 (maki 8 kowanne) keɓe daga juna kuma daga sauran tsarin.

• Abubuwan Shigar Dijital/Fitarwa: rukunin 1 na maki 8, keɓe daga sauran tsarin.

• Alamar Analog: Abubuwan shigar da analog da ƙungiyoyin fitarwa ba su keɓanta a ciki ba, amma ana ba da izinin filayen ma'anar su (AGND1, AGND2) wani ɗan bambanci mai yuwuwa (± 1V) daga ƙasan dijital da ƙasa mai ƙarfi. Ana samun ingantaccen aiki ta amfani da igiyoyi masu garkuwa da ƙasa mai kyau.

• Hanyoyin Sadarwa: CS31 bas da siriyal musaya COM1/COM2 sun keɓe daga da'irori na ciki.

• Ƙarfin wutar lantarki: shigarwar 24V DC yana da kariyar juzu'i.

3.3 Samar da Wutar Lantarki da Kasa

• Ƙarfin wutar lantarki: 24 V DC (± 15%), an haɗa shi ta hanyar shingen tashar 5-pin. Ana ba da shawarar samar da wutar lantarki mai karko kuma abin dogaro na masana'antu.

• Grounding: Yana Samar da Tashar Kariya (PE) da tashar Faston grounding. An jaddada cewa dole ne a haɗa waɗannan zuwa tsarin ƙasa na majalisar kulawa, da guje wa madaukai na ƙasa. Garkuwar igiyoyin siginar analog yakamata a yi ƙasa a wuri guda a gefen mai sarrafawa.

4. Yanayin aikace-aikace

Tare da ayyukan haɗin gwiwarsa masu ƙarfi da ƙarfin haɓakawa, ABB 07 KT 97 ya dace da filayen sarrafa masana'antu da yawa masu buƙata:

1. Sarrafa Injin Tsaya: A matsayin babban mai sarrafawa wanda ke tsaye, sarrafa manyan lambobi na sigina na I/O na gida kai tsaye (misali, firikwensin, masu kunnawa, saiti na analog don tuƙi). Ya dace da injin marufi, injin bugu, injinan gyare-gyaren allura, benci na gwaji, da sauransu.

2. Babban tashar Jagora a cikin Tsarin Gudanar da Rarraba: A matsayin babban mai kula da tsarin bas ɗin tsarin CS31, haɗa tashoshin I / O mai nisa (misali, 07 DC 92, 07 DI 92) an rarraba cikin kayan aiki, gina tsafta da amintaccen tsarin don layin jikin mota, layin taro, tsarin sarrafa kayan.

3. Subsystem Control Subsystem: Yin amfani da ikon sarrafa analog ɗin sa da ayyukan PID (ta hanyar software) don sarrafa sigogin tsari kamar zazzabi, matsa lamba, da kwarara. Zai iya aiki azaman ƙarshen gaba mai hankali don manyan DCS ko tsarin SCADA.

4. Networked Manufacturing Cell: Through its integrated PROFIBUS-DP or Ethernet interface, seamlessly integrating into factory-level industrial networks for data exchange with upper-level MES/ERP systems, HMI panels, drive devices, and other PLCs.

5. Shigar da bayanai da Gudanar da girke-girke: Yin amfani da babban ƙarfin aikin katin ƙwaƙwalwar ajiya don sauƙaƙe shigar da bayanan samarwa, madadin sigar kayan aiki, da sauyawa tsakanin girke-girke na samfur daban-daban.

5. Sigogi da Jagorar Zaɓi

07 KT 97 yana ba da nau'ikan iri da yawa don dacewa da buƙatun haɗin kai daban-daban. Masu amfani yakamata su zaɓi bisa tsarin hanyar sadarwa:

• R0100, R0200: Daidaitaccen sigar, tare da ƙirar bas na CS31 kawai.

• R0120, R0220: Haɗe-haɗe na PROFIBUS-DP.

• R0160, R0260: Haɗin haɗin ARCNET.

• R0162, R0262: Haɗin ARCNET + PROFIBUS-DP dual interface.

• R0268: Haɗe-haɗen ARCNET

• R0270: Haɗin haɗin Ethernet.

• R0272: Haɗin Ethernet + PROFIBUS-DP dual interface.

• R0276: Haɗin Ethernet + ARCNET dual interface.

• R0277: Haɗin haɗin Ethernet Dual Ethernet.

• R0278: Haɗe-haɗen Ethernet + CAN Buɗe masarrafa biyu.

• R0280: Haɗe-haɗe na CANopen interface.

Lura: Babban bambanci tsakanin jerin R01xx da R02xx ya ta'allaka ne don tallafawa katunan SmartMedia (R02xx yana goyan bayan katunan 3.3V da 5V, kuma yana iya samun saurin sarrafawa).

6. Takaitaccen Amfanin Tsarin

1. Babban Haɗin kai: Rich I/O da albarkatun sadarwa da aka haɗa cikin tsari guda ɗaya, rage adadin abubuwan tsarin, inganta aminci, da adana sararin majalisar.

2. Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwaƙwalwa na Ƙaƙwalwa na Ƙaƙwalwa na Ƙaƙwalwa na Ƙaƙwalwa na Ƙaƙwal ) na Ƙaƙƙarfan Ƙarfafawa , da Ƙarfin Ƙwaƙwalwar Ƙwaƙwalwar Ƙwaƙwalwar Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwaƙwalwa na Ƙaƙwalwa na Ƙaƙwalwa na Ƙaƙwalwa na Ƙaƙwalwa na Ƙaƙwalwa na Ƙaƙwalwar Ƙaƙwalwa ) da Algorithms.

3. Fadada sassauƙa: Babban girman I/O faɗaɗa ta bas ɗin CS31; sauƙi hadewa cikin kowane data kasance masana'anta sarrafa kansa gine ta mahara na zaɓi hadedde cibiyar sadarwa musaya.

4. Sauƙin Amfani da Kulawa: Bayyanar binciken LED, tashoshi masu toshewa, sauƙin maye gurbin baturi da katin ƙwaƙwalwar ajiya suna sauƙaƙe shigarwa, ƙaddamarwa, da kiyayewa.

5. Ƙarfafa da Amintacce: Ƙirar ƙirar masana'antu, kewayon zafin jiki mai faɗi, cikakkiyar keɓewar lantarki, da da'irar kariya suna tabbatar da kwanciyar hankali na dogon lokaci a cikin mahallin masana'antu masu tsauri.

6. Manufa-Gaba: Taimako don Ethernet masana'antu da manyan motocin filaye suna kafa tushe mai ƙarfi don ƙididdige kasuwancin da haɓaka hazaka.

7. Bayanin oda

Samfurin asali: 07 KT 97 R0200 (Sandar babban aiki mai inganci tare da bas CS31)
Lambar oda: GJR5 2530 00 R0200
Iyakar Isar da Ya haɗa da:

• Sashin asali 07 KT 97

• 1 x 5-pin tasha tasha (5.08 mm)

• 1 x 3-pin katangar tasha (5.08 mm)

• 3 x 10-pin tasha tubalan (3.81 mm)

• 4 x 9-pin tubalan tasha (3.81 mm)

• 1 x 5-pin tasha tasha (3.81 mm)

Mabuɗin Na'urorin haɗi:

• Module Batirin Lithium 07 LE 90 (Order No.: GJR5 2507 00 R0001)

• Katin SmartMedia 07 MC 90 (2 MB 5V: GJR5 2526 00 R0101; 8 MB 3.3V: GJR5 2526 00 R0201)