GE IS200DRLYH1BBB Simplex Relay Output Board

IS200DRLYH1BBB babban kwamiti ne na fitarwa mai sauƙi daga GE Industrial Systems, wani ɓangare na jerin DRLY. Wannan ƙaramin allo mai ɗaurawa bango yana samar da busasshiyar fitarwar fitarwar lamba 12 kuma an ƙera shi don yin mu'amala kai tsaye tare da VCCC, VCRC, ko VTUR allunan sarrafawa ta hanyar kebul na 37-pin D-sub guda ɗaya. IS200DRLYH1BBB shine bambance-bambancen H1B, wanda ya dace musamman don amfani a cikin UL Listed Class I, Rarraba 2 masu haɗari (classified) wurare . Karamin sawun sa na zahiri da ƙaƙƙarfan saitin fasalin sa ya sa ya zama kyakkyawan zaɓi don aikace-aikace inda sarari ke da iyaka kuma ana buƙatar fitar da maɗaukakiyar relay.

Ba kamar babbar hukumar tasha ta TRLY ba, jerin DRLY ba su haɗa da danne hawan jirgi ko sa ido na jihar ba. Koyaya, yana ba da ingantaccen bincike na gani ta hanyar LEDs kore da rawaya, kuma busassun busassun buƙatun sa suna ba da ingantaccen sauyawa don nau'ikan sarrafa masana'antu da yawa. Ana iya haɗa allunan DRLY guda biyu zuwa allon VCCC, VCRC, ko VTUR guda ɗaya, suna samar da abubuwan sadarwa har 24. Lura cewa allon DRLY bai dace da fakitin I/O na PDOA ba.

Bayanin Aiki

IS200DRLYH1BBB yana aiki azaman mai sauƙi, haɓaka fitarwa mai ƙarfi don GE Mark VI tsarin sarrafa injin turbin da sauran masu sarrafa masana'antu. Tashar tasha tana karɓar wutar lantarki 28 V dc don coils ɗin sa kai tsaye daga allon I/O da aka haɗa (VCCC, VCRC, ko VTUR). Hukumar I/O tana sarrafa kowane gudun ba da sanda akayi daban-daban ta amfani da ko cire wutar lantarkin nada. Kowane fitarwa na relay shine nau'i-C (canzawa) busasshiyar lamba , ma'ana yana samar da lambobi a buɗe (NO) da kuma rufe (NC), tare da tasha gama gari (COM).

Mabuɗin fasali na IS200DRLYH1BBB sun haɗa da:

• 12 na'ura mai zaman kanta mai zaman kanta - Kowane gudun ba da sanda na'ura ce ta biyu-pole sau biyu, tana ba da lambobin NO biyu da lambobin NC guda biyu a kowace gudun ba da sanda (saitin NO/NC/COM ɗaya ne aka fitar da shi zuwa tashar tashar tashar jiragen ruwa; ba a amfani da sandar na biyu).

• Busassun ƙirar lamba - Ba a ba da wutar lantarki ta waje ta cikin jirgi; mai amfani yana ba da ƙarfin lodi daban. Wannan yana ba da damar sauya lodin AC ko DC har zuwa iyakar ƙididdiga.

• Alamar LED - Koren LED a saman allon yana nuna cewa 28V dc coil ikon yana nan. LED mai launin rawaya da ke kusa da kowane gudun ba da sanda yana haskaka lokacin da aka yi amfani da wutar lantarki zuwa ga waccan na'urar relay, tana ba da bayyananniyar alamar gani na yanayin da aka umarta.

• Babu danne kan jirgi - Ba kamar hukumar TRLY ba, IS200DRLYH1BBB baya haɗa da snubbers na ciki ko diodes na tashi. Dole ne abokin ciniki ya samar da matsi na waje (misali, MOVs, diodes, ko cibiyoyin sadarwa na RC) lokacin da ake canza lodin inductive.

• Babu saka idanu na jihar relay - Hukumar I/O ba ta sake karanta ainihin yanayin tuntuɓar ba; ɗaukar hoto yana iyakance ga kasancewar ƙarfin wutan wuta.

• Haɗin bango - Ba a tsara allon don hawan dogo na DIN ba. Ana kiyaye ta ta ramukan hawa kusurwa huɗu akan farantin tallafi na ƙarfe.

Allon yana haɗi zuwa allon sarrafa I/O (VCCC, VCRC, ko VTUR) ta hanyar kebul na D-sub mai 37-pin. Mai haɗin haɗin yana kama da wanda aka yi amfani da shi a kan babban allon TRLY, yana ba da damar haɗin kebul. Lokacin da aka cire haɗin kebul na sarrafawa, duk tsohowar relays zuwa yanayin da ba a iya samun kuzari (COM da aka haɗa da NC).

Halayen Hardware

Girman Jiki da Hauwa

• Tsawo : 21.59 cm (8.5 inci)

• Nisa : 20.57 cm (8.1 inci)

• Hawa : Haɗin bango ta amfani da sukurori huɗu ta cikin ramukan kusurwa na farantin tallafin ƙarfe. Allo ba shi da ɗigon garkuwa.

• Masu haɗawa :

  • 37-pin D-sub mata mai haɗawa - Yana karɓar kebul na sarrafawa daga allon I / O (J3 ko J4 akan VCCC / VCRC / VTUR).

  • Tubalan tasha (TB1 da TB2) - Babban nau'in katanga na yuro-katanga masu toshe tashoshi. TB1 yana ba da haɗin haɗin dunƙule don abubuwan fitarwa guda 12 (masu ƙididdige ƙididdiga don kowane relay's NO, NC, COM). TB2 yana ba da sukurori biyu don haɗin SCOM (chassis ground) , waɗanda dole ne a haɗa su zuwa ƙasan chassis tare da mafi ƙarancin yuwuwar gubar gubar.

Waya Fitowar Relay

Ana samun damar kowace fitarwa ta hanyar sadarwa ta tashoshi uku akan TB1:

• NC (kullum rufaffiyar) - rufe lamba lokacin da aka daina samun kuzari.

• COM (na kowa) - lamba mai motsi.

• A'a (budewa kullum) - rufe lamba lokacin da aka sami kuzari.

Ya kamata a yi wayoyi ta amfani da screws masu ƙima kamar yadda aka nuna a cikin alamar allon. Babu tashar tashar garkuwa, don haka igiyoyi masu kariya dole ne a yi ƙasa a ƙarshen tushen.

LED Manuniya

Umarnin Shigarwa

Yin hawa

1. Zaɓi wuri mai tsabta, bushe, mara girgiza akan bango ko panel. Ba a tsara allon don hawan dogo na DIN ba.

2. Yi amfani da ramukan hawa huɗu a kusurwoyin farantin tallafin ƙarfe don tabbatar da allon tare da sukurori masu dacewa. Tabbatar cewa allon yana haɗe sosai.

Kasa

• Dole ne a haɗa TB2 (SCOM) zuwa ƙasan chassis ta amfani da sukurori biyu. Riƙe gubar ƙasa gajere gwargwadon yiwuwa don rage hayaniya da tabbatar da aiki mai kyau. Rashin haɗa SCOM na iya haifar da rashin daidaituwar halayyar relay ko al'amuran hayaniyar lantarki.

Fitar Wayar Waya

• Haɗa wayoyi na filin zuwa screws masu ƙima a kan toshe TB1. Kowane gudun ba da sanda yana da tashoshi uku (wanda aka fi sani da NC, COM, NO). Koma zuwa allon siliki na allo ko zanen wayoyi a cikin takaddar da aka makala.

• Yi amfani da ma'aunin waya masu dacewa don ɗaukar nauyi na yanzu (har zuwa 2 A dc ko 1 A rms). Tubalan tasha suna karɓar daskararru ko masu daure kai har zuwa 2.5 mm² (kimanin 12 AWG).

• Domin inductive lodi (relays, solenoids, Motors), waje na'urorin dole ne a shigar da abokin ciniki. Rashin samar da danniya na iya haifar da waldar lamba ko yawan hayaniyar lantarki.

Haɗa zuwa Hukumar I/O

• Haɗa kebul na 37-pin D-sub (mai kama da igiyoyin TRLY) daga mahaɗin allon I/O J3 ko J4 zuwa mai haɗin mata 37-pin DRLY board. Tabbatar cewa an kulle kebul ɗin amintacce.

• Idan ana amfani da allunan DRLY guda biyu, haɗa kowannensu zuwa tashar jiragen ruwa daban akan allon I/O (misali, J3 da J4). Firmware na hukumar I/O zai gane allon ta atomatik ta guntuwar ID ɗin su.

Ƙarfafawa da Tabbatarwa

• Aiwatar da wutar lantarki zuwa allon I/O. Koren P28 OK LED akan DRLY yakamata ya haskaka, yana nuna cewa 28 V dc yana nan don coils na relay.

• Ta hanyar software na tsarin sarrafawa, ba da umarnin kunnawa da kashe kowane gudu. Lura da madaidaicin LED mai launin rawaya don kowane gudun ba da sanda (K1 zuwa K12). LED ya kamata ya kunna lokacin da aka ba da umarnin kunnawa da kashe lokacin da aka kashe.

• Lura cewa LED mai launin rawaya yana nuna wutar lantarki, ba rufewar lamba ba. Don tabbatar da ainihin sauyawar lamba, yi amfani da multimeter a fadin NO/COM ko NC/COM tashoshi.

Bincike da Shirya matsala

IS200DRLYH1BBB yana ba da bincike na asali ta LEDs da guntu ID na kan allo. Saboda babu sa ido na jihar relay, hukumar I/O ba za ta iya gano idan lambar sadarwa ta kasa rufewa ko ta yi walda.

Kanfigareshan

IS200DRLYH1BBB ba ya ƙunshi masu tsalle, tsotsa, ko kowane saitunan kayan masarufi masu daidaitawa . Ana yin duk daidaitawa a cikin software na tsarin sarrafawa (misali, ToolboxST) akan allon I/O da aka haɗa. Hukumar I/O tana ƙididdige hukumar DRLY ta atomatik ta guntuwar ID kuma tana ba da wuraren fitarwa daidai.

Bayanin oda

Lokacin yin odar IS200DRLYH1BBB, yi amfani da cikakken lambar ɓangaren daidai kamar yadda aka nuna. Lambar ɓangaren tana biye da yarjejeniyar GE:

• IS200 - Jerin Innovation, 200V aji

• DRLY - Gagarumin aiki: allon tashar fitarwa ta Simplex Relay

• H1 - Generation/Sigar

• Bambancin B - H1B (Clas I, Div. 2 bokan, ƙananan ƙimar lamba)

• B - Ƙarin gyare-gyare (misali, shafi ko ƙarewa)

• B - Bita B

Garanti da Sanya oda

• Maye gurbin garanti (a cikin lokacin garanti): Tuntuɓi GE Masana'antu Sarrafa Systems Samfurin Sabis na Sabis kai tsaye:
  GE Industrial Control Systems
  Product Engineering Sabis na Sabis
  1501 Roanoke Blvd.
  Salem, VA 24153-6492 Amurka
  Wayar: +1-540-387-7595
  Fax: +1-540-387-8606

• Kayayyakin kayan gyara ko oda mara garanti : Tuntuɓi GE Sales ko Ofishin Sabis mafi kusa. Samar:

  • Cikakken lambar ɓangaren: IS200DRLYH1BBB

  • Turi ko tsarin sarrafa injin turbine lambar serial number

Lura: Duk lambobi a cikin lambar ɓangaren suna da mahimmanci. GE na iya musanya bita mai dacewa daga baya, amma an tabbatar da dacewa da baya.

Hannun Hannu da Ajiya

• Hankali a tsaye - allon yana ƙunshe da abubuwan da suka dace ( guntun ID, relays tare da direbobin semiconductor). Yi amfani da madaurin wuyan hannu da aka yi ƙasa kuma a adana a cikin jakar antistatic.

• Damuwar injina – Kar a lanƙwasa ko jujjuya allo. Riƙe ta gefuna ko farantin goyan bayan ƙarfe.

• Danshi - Rike allon bushewa. Idan magudanar ruwa zai yiwu, ba da izinin hukumar ta daidaita kafin shigarwa.

• Jirgin ruwa - Yi amfani da marufi na GE na asali ko makamancin abin da ba a iya gani ba, kwandon matattara.

Bayanan Daidaitawa

• IS200DRLYH1BBB ya dace kawai tare da allon sarrafa VCCC, VCRC, da VTUR. Ba ya aiki tare da fakitin I/O PDOA.

• Lokacin amfani da VTUR, ana buƙatar allon mika mulki na DTRT don sarrafa har zuwa relays guda uku. Tare da DTUR guda biyu, ana iya sarrafa har zuwa relays shida.

• Ana iya haɗa allunan DRLY guda biyu zuwa allon I/O guda ɗaya don jimlar abubuwan da aka fitar 24.

• Jirgin ba DIN dogo mai hawa; dole ne a dora shi bango.

• Babu wani tsiri na garkuwa - yi amfani da ayyukan garkuwar kebul a tushen.

Amincewa da Muhalli da Hukumar

• Yanayin zafin jiki : 0°C zuwa 75°C (32°F zuwa 167°F) – ya fi na sigar H1A (0‑60°C).

• Wurare masu haɗari : UL da aka jera don Class I, Division 2, Rukunin A, B, C, D wurare masu haɗari (classified).

• Takaddun shaida : UL, CSA, CE. Lambobin sadarwa na UL an jera su kuma CSA bokan, an hatimce su zuwa UL 1604.