ABB RLM01 3BDZ000398R1 PROFIBUS Redundancy Link Module

Module na ABB RLM01 PROFIBUS DP/FMS Redundancy Link Module babban abin dogaro ne na sake fasalin sadarwa wanda aka tsara don tsarin sarrafa sarrafa kansa na masana'antu. Ana amfani da wannan tsarin da farko don canza layin PROFIBUS mai sauƙi, mara ƙari zuwa layi biyu da ba su da yawa (A da B), suna haɓaka aminci da rashin haƙurin sadarwar filin bas. RLM01 ya dace da aikace-aikace tare da buƙatu masu tsauri don ci gaban tsarin, kamar wutar lantarki, sinadarai, ruwa, tsarin ruwa, da filayen sarrafa sarrafa kansa daban-daban.

RLM01 yana goyan bayan ka'idojin PROFIBUS DP da FMS, tare da adadin watsawa daga 9.6 kBit/s zuwa 12 MBit/s. Yana fasalta zaɓin layi na atomatik, saka idanu matsayin sadarwa, aikin maimaituwa, ƙarin tallafin wutar lantarki, da iyawar ƙararrawa kuskure. An tsara ƙirar ƙirar ƙira don sauƙi shigarwa akan daidaitattun hanyoyin DIN kuma ya dace da yanayin masana'antu daban-daban.

---

2. Mabuɗin Siffofin Siffar Fasalin Fassara

Ƙayyadaddun	Ayyuka na Musamman
Juyin Ragewa	Yana canza layin PROFIBUS (M) guda ɗaya wanda ba a sake sakewa ba zuwa layi biyu da ba a sake maimaita su ba (A/B), tare da watsa bayanai na bidirectional.
Ka'idar Sadarwa	Yana goyan bayan PROFIBUS DP/FMS, mai dacewa da ma'aunin DIN 19245
Yawan watsawa	9.6 kBit/s zuwa 12 MBit/s, ana iya daidaita su ta hanyar juyawa
Zaɓin Layi	Ganewa ta atomatik kuma zaɓi layukan da suke samuwa, yana goyan bayan gazawar
Ayyukan Kulawa	Saka idanu na ainihi na matsayin sadarwa da kurakurai akan dukkanin layi uku (A, B, M)
Maimaita Aiki	Damar sabunta sigina, tana goyan bayan tsawaita sadarwa mai nisa
Tsarin Samar da Wuta	Yana goyan bayan samar da wutar lantarki guda ɗaya ko ƙari 24 VDC, tare da saka idanu akan wutar lantarki
Fitowar ƙararrawa	Yana ba da yuwuwar lambar ƙararrawa kyauta don gano kuskuren nesa
Hanyar shigarwa	Standard DIN dogo hawa, dace da masana'antu kabad
Daidaitawar Muhalli	Ya bi ka'idodin yanayin masana'antu, yana tallafawa aikace-aikacen ruwa da na ruwa (GL bokan)

---

3. Bayanin Aiki

Samfurin RLM01 yana fasalta musaya na RS 485 masu zaman kansu guda uku (A, B, M), kowanne yana goyan bayan sadarwa mai cikakken duplex. Tsarin yana ba da keɓewar lantarki tsakanin musaya guda uku da tsakanin musaya da wutar lantarki, saduwa da ma'aunin keɓewar aikin VDE 0110 tare da ƙarfin gwaji na 500 Veff.

Samfurin ya ƙunshi dabaru na sauya layi mai hankali:

• Lokacin da aka karɓi bayanai daga layin A ko B tare da farawar telegram daidai, ana tura shi zuwa layin M;

• Idan layin A ya sami kuskuren farawa na telegram, dabarun sarrafawa ta atomatik yana canzawa zuwa layin B;

• Bayanan da aka karɓa daga layin M ana watsa su a lokaci guda zuwa duka layin A da B, suna samun nasarar fitar da tsarin watsa shirye-shirye.

RLM01 kuma ya haɗa da aikin maimaitawa, wanda ke sake fasalin da haɓaka siginonin da aka karɓa, yana goyan bayan tsawaita cibiyar sadarwar PROFIBUS mai nisa. Kowane mahaɗa yana iya haɗawa har zuwa tashoshin PROFIBUS 31. Lokacin amfani da masu maimaitawa da masu canza fiber optic, ana iya ƙara faɗaɗa ma'aunin cibiyar sadarwa.

---

4. Shigarwa da Kanfigareshan

Bayanan Tsaro

• Dole ne a yi amfani da shi ta hanyar ƙarin ƙarancin ƙarfin lantarki (24 VDC); Hakanan dole ne ikon tuntuɓar ƙararrawa ya cika;

• Dangane da ka'idodin UL/CSA, ana buƙatar na'urorin kariya na waje (misali, fuses, rated 1.6A-10A);

• Wurin shigarwa dole ne ya tabbatar da kyakkyawan yanayin zafi, tare da> 30 mm sharewa a kusa da module;

• Kar a haɗa layukan bas waɗanda aka shigar da su gaba ɗaya ko gaba ɗaya a waje kai tsaye zuwa tsarin; yi amfani da fiber optics da masu canza wutar lantarki don keɓewar lantarki.

Shigar Injiniya

An ƙera ƙirar don hawa tsaye akan dogo na DIN 35 mm. Don shigarwa, da farko sanya shirye-shiryen bidiyo na baya a saman gefen layin dogo, sannan a hankali danna ƙasan tsarin har sai shirye-shiryen bidiyo sun kulle a ji. Kula da aƙalla sharewa mm 30 sama da ƙasa da tsarin don zubar da zafi.

Haɗin Wutar Lantarki

• PROFIBUS Interfaces: A, B, M duk masu haɗin Sub-D mata ne 9-pin, tare da ayyukan fil ɗin da suka dace da ma'aunin PROFIBUS:

• Fil 3, 8: Bayanan inganci/mara kyau (RxD/TxD)

• Fil 5, 6: Ƙarfin ƙarewa na waje (DGND, VP)

• Ƙarfin Ƙarfafawa da Ƙarfafa Ƙararrawa: Yi amfani da toshe tasha mai toshe 8-pin don sauyawa mai sauri:

Saitin Rate na Baud

Saita ƙimar baud ta amfani da maɓallin juyawa na gaba, tare da matsayi 10 (0-9) kamar haka:

Bayan saitin, a taƙaice danna maɓallin sake saiti don kunna sanyi.

---

5. Kulawa da Bincike

Ƙungiyar gaban RLM01 tana da alamun LED masu launi masu yawa don sadarwa da matsayi:

LEDs Matsayin Sadarwa (Dokar/Kuskure)

• Dokar Yellow: Sadarwar layi ta al'ada (tsaye ko walƙiya)

• Kuskure Red: Laifin sadarwar layi

Wutar lantarki (Pwr)

• Green Pwr: Power normal

• Kashe: Ƙarfin wutar lantarki mara kyau

Tuntuɓar Ƙararrawa

Tsarin yana ba da saitin lambobi masu yuwuwar rufaffiyar lambobi (F1-F2), waɗanda ke kasancewa a rufe yayin aiki na yau da kullun kuma suna buɗewa a yanayin sadarwa ko gazawar wutar lantarki, ba da damar haɗi zuwa PLC ko tsarin kulawa don bincike mai nisa.

Alamar Alamar Halitta

Layin A Dokar/Kuskure	Layin B Dokar/Kuskure	Ma'anar Tuntuɓar	Ƙararrawa
Yellow/Kashe	Yellow/Kashe	An rufe	Sadarwa ta al'ada akan dukkanin layi uku
Yellow/Kashe	Kashe/Ja	Bude	Sadarwa ta al'ada akan A & M kawai; B kuskure
Kashe/Ja	Yellow/Kashe	Bude	Sadarwa ta al'ada akan B & M kawai; Kuskure
Yellow/Yellow	Kashe/Kashe	An rufe	Sadarwa ta al'ada akan A & B kawai; M kuskure

---

6. Yanayin aikace-aikace

1. Gudanar da Tsarin Masana'antu: Ana amfani dashi a cikin sinadarai, wutar lantarki, tsarin kula da ruwa da ke buƙatar babban amincin sadarwa;

2. Marine & Maritime Systems: GL bokan, dace da tsarin sarrafa sarrafa kansa na jirgi;

3. Production Line Automation: Yana goyan bayan PROFIBUS DP redundancy network, inganta kayan aiki;

4. Gudanar da Makamashi: Ya dace da tashoshin, tashoshin wutar lantarki, da sauran muhimman abubuwan more rayuwa;

5. Sufuri Automation: Kamar sarrafa rami, tsarin siginar layin dogo.