GE IS420UCSBH1A UCSB Standalone Controller Module

IS420UCSBH1A shine tsarin sarrafawa mai zaman kansa a cikin tsarin sarrafa Mark VIe na GE, wani ɓangare na jerin UCSB. An ƙera shi don aikace-aikacen sarrafa masana'antu, ya dace musamman don saka idanu na gaske da sarrafa kayan aikin wuta mai mahimmanci kamar injin turbin gas, injin tururi, injin iska, da tsarin lantarki. An sanye shi da babban na'ura mai sarrafa Intel da ingantaccen tsarin aiki na QNX Neutrino na ainihi, yana ba da damar sarrafa bayanai masu ƙarfi, babban abin dogaro, da mu'amalar sadarwa mai sassauƙa don biyan buƙatun masana'antu masu rikitarwa.

---

Mabuɗin Siffofin

1. Babban Ayyukan Gudanarwa

IS420UCSBH1A tana da ƙarfi ta 600 MHz Intel EP80579 processor, mai goyan bayan 256 MB na DDR2 SDRAM tare da Lambar Gyara Kuskure (ECC), yana tabbatar da daidaiton lissafi da daidaiton tsarin. Ya haɗa da 2 GB na ƙwaƙwalwar filasha na NAND don firmware da ajiyar aikace-aikacen, yana ba da damar haɓakawa da sauri da riƙe bayanan dogara.

2. Multiple Network Communication Interfaces

Mai sarrafa yana ba da tashoshin Ethernet da yawa, gami da:

• 2 Babban tashar jiragen ruwa na Ethernet: Don Babban Hanyar Bayanai na Unit (UDH) da Babban Hanyar Kula da Bayanai na zaɓi (CDH), ba da damar sadarwa tare da HMI, tashoshin injiniya, da sauran na'urorin sarrafawa.

• 3 IONet tashar jiragen ruwa: An sadaukar da kai don sadarwa tare da nau'ikan I/O (misali, PAIC, PDIA), suna goyan bayan musayar bayanai na ainihin-lokaci da daidaitawar agogo daidai ta hanyar IEEE 1588 yarjejeniya.

3. Real-Time Operating System

Yana gudana akan QNX Neutrino na ainihi OS, yana goyan bayan multitasking da babban madaidaicin lokaci don tabbatar da aiwatar da ƙayyadaddun aiwatar da dabaru na sarrafawa-madaidaici don aikace-aikacen masana'antu mai sauri, ingantaccen abin dogaro.

4. Sassauƙan Shirye-shiryen da Ƙirar Hankali

Yana goyan bayan Harshen Toshe Sarrafa, gami da katangar sarrafawa na analog da dijital, da ma'anar Boolean a cikin tsarin zane na relay. Nau'in bayanan da aka goyan sun haɗa da:

• Boolean

• 16- da 32-bit sa hannu/masu sa hannu

• Ƙimar 32- da 64-bit masu iyo

5. Ragewa da Amincewa

• Yana goyan bayan sakewar hanyar sadarwa biyu don kiyaye aiki yayin gazawar hanyar sadarwa.

• Ƙirar da ba ta da baturi, ba ta buƙatar saitunan tsalle, rage bukatun kulawa.

• Gina mai ƙididdige ƙididdigewa da sake saitin da'ira na kayan aiki yana haɓaka amincin tsarin.

6. Bincike da Alamomin Matsayi

Panel ɗin gaba ya haɗa da alamun LED da yawa don sa ido kan matsayin ainihin lokaci:

• Link/Dokar: Haɗin hanyar sadarwa da ayyuka

• Iko: Matsayin iko

• Kan layi: Matsayin mai sarrafawa

• Filashi: Halin samun damar ƙwaƙwalwar ajiyar Flash

• Diag: Halin ƙararrawa na bincike

• Boot: Matsayin taya (ya haɗa da alamar kuskure)

7. USB farfadowa da na'ura Aiki

Yana ba da damar wariyar ajiya da dawo da tsarin ta hanyar tashar USB ta gaba ta amfani da kebul ɗin da aka tsara FAT32-babu kwazo da ake buƙata.

8. Karfin Muhalli

• Yanayin aiki: -30°C zuwa 65°C

• Adana zafin jiki: -40°C zuwa 85°C

• Humidity: 5% zuwa 95% (ba mai haɗawa)

• Ya bi ka'idodin masana'antu don girgiza, girgiza, da EMC

  
  

---

Ƙa'idar Aiki

1. Tsarin Gine-gine

A matsayin babban sashin sarrafawa na tsarin sarrafa Mark VIe, IS420UCSBH1A yana sadarwa tare da nau'ikan I/O da aka rarraba (misali, PAIC, PDIA, PTCC) ta hanyar IONet — cibiyar sadarwa ta Ethernet da aka keɓe. Yana aiwatar da lambar aikace-aikace, sarrafa siginar shigarwa daga na'urori masu auna firikwensin, gudanar da algorithms sarrafawa, da fitar da siginar sarrafawa zuwa masu kunnawa.

2. Gudun Bayanai da Gudanarwa

• Gudanar da shigarwa: Yana karɓar analog, dijital, zazzabi, girgiza, da sauran sigina daga ƙirar I/O ta IONet.

• Ƙirar Dabarun Gudanarwa: Yana aiwatar da ƙididdiga bisa ƙayyadaddun dabarun sarrafawa (misali, sarrafa PID, jeri, dabaru na kariya).

• Ikon fitarwa: Yana aika sakamakon ƙididdigewa ta hanyar IONet zuwa samfuran I/O don fitar da bawuloli, servos, relays, da sauran na'urori.

3. Aiki tare na hanyar sadarwa da Haƙurin Laifi

• Yana amfani da IEEE 1588 Precision Time Protocol (PTP) don daidaita agogo tsakanin mai sarrafawa da na'urorin I/O, yana tabbatar da daidaiton lokacin tsakanin ±100 microsecond.

• Yana goyan bayan gine-ginen Modular Modular Redundancy (TMR) guda uku, inda masu sarrafawa uku zaɓe kan sigina masu mahimmanci don haɓaka amincin tsarin.

4. Binciken Laifi da Kulawa

• Ci gaba da lura da halin kayan masarufi (misali, iko, ƙwaƙwalwa, hanyoyin sadarwa).

• Yana haifar da faɗakarwa ta LEDs, ToolboxST software, ko HMI akan gano kuskure.

• Yana goyan bayan gyare-gyaren dabaru na kan layi ba tare da rufe tsarin ba, haɓaka samuwa.

5. Gudanar da Wutar Lantarki

• Wutar lantarki mai shigarwa: 28V DC (kewaye: 18-36V DC)

• Masu juyawa na ciki na DC-DC suna ba da matakan ƙarfin lantarki da yawa don ƙarfafa injin sarrafawa da da'irori.

• Ƙananan amfani da wutar lantarki: 15.6 W na yau da kullum, 26.7 W kololuwa.

  
  

---

Aikace-aikace

IS420UCSBH1A ana amfani dashi sosai a:

• Tsarin sarrafa injin turbin gas (Frame 6/7/9)

• Sarrafa injin turbi

• Tsarin sarrafa injin injin iska

• Hydroelectric shuka monitoring

• Ma'auni na Shuka (BOP) tsarin kulawa na taimako

• Tsarin sarrafawa da tsarin kariya na masana'antu