IOCR2 620-022-000-112 Katin Sadarwar Sadarwa / Fitarwa

VM600 IOCR2 muhimmin sashi ne na tsarin sa ido na jerin rack na VM600 daga layin samfurin VM. Yana aiki azaman shigarwa/fitarwa mai dacewa da katin mu'amalar sadarwa don katin kula da rack CPUR2. Tare, IOCR2 da CPUR2 suna samar da cikakken kati guda biyu waɗanda ke ba da kulawar rack, ƙofar sadarwa, da ayyukan mu'amalar sigina don tsarin VM600. An ƙera shi don mahallin masana'antu, ana amfani da wannan katin a cikin jujjuyawar kariyar injuna da tsarin kula da yanayin, ana amfani da shi sosai a cikin samar da wutar lantarki, mai da iskar gas, da sauran masana'antu.

An shigar da katin IOCR2 a baya na tsarin tsarin VM600 ABE04x kuma yana haɗi zuwa katin CPUR2 da aka ɗora a gaba ta hanyar jirgin baya. Tare, suna ba da damar sarrafa daidaitawa, sadarwar bayanai, da sarrafa sigina don katunan sa ido daban-daban a cikin tsarin VM600 (kamar MPC4, XMX16, da sauransu). Tsarinsa yana goyan bayan musayar zafi kuma yana ba da kyakkyawar dacewa ta lantarki (EMC) da keɓewar lantarki, yana mai da shi dacewa da buƙatar yanayin masana'antu.

---

Mabuɗin Siffofin

1. Ayyukan Interface Sadarwa

Katin IOCR2 yana ba da hanyoyin sadarwa da yawa, tallafawa tsarin Ethernet da sadarwar filin bas, gami da:

• Tsarin Ethernet Interfaces: Biyu 10/100/1000BASE-T (X) Ethernet tashar jiragen ruwa (ETHERNET1 da ETHERNET2) don:

• Sadarwa tare da kwamfutoci masu aiki da software na VM600 MPSx ko VibroSight;

• Sadarwa tare da nau'ikan katin sa ido na XMX16 / XIO16T;

• Taimakawa ga Modbus TCP yarjejeniya don musayar bayanai tare da tsarin ɓangare na uku (misali, DCS, PLC).

• Hanyoyin sadarwa na Fieldbus: Tashoshin motar bas masu zaman kansu guda biyu (FIELDBUS1 da FIELDBUS2), kowannensu ya ƙunshi:

• Serial interface guda ɗaya na RS-485 (mai goyan bayan PROFIBUS DP) don sadarwa tare da manyan na'urorin bus na filin;

• Ɗayan hanyar sadarwa ta Ethernet (mai goyan bayan Modbus TCP) don musayar bayanai mai sauri;

• Taimako don aiki tare na motocin bas biyu na lokaci guda, yana ba da damar sake sadarwar sadarwa.

2. Ayyukan Relay Output

Katin IOCR2 yana ba da relays masu daidaitawa guda biyu (RL1 da RL2), kowane nau'in jifa-ɗaya-ɗaya (SPDT / Form C), tare da halaye masu zuwa:

• Ƙimar wutar lantarki: 240 VAC;

• Ƙididdigar halin yanzu: 5 A;

• Matsakaicin raguwa: 1250 VA (ba tare da kariyar lamba ba);

• Ana iya yin taswira ta hanyar masu canji na Modbus don nuni mai nisa na matsayin tsarin, matsayin sadarwa, ko bayanin ƙararrawa gabaɗaya.

3. Warewa Wutar Lantarki da Daidaituwar Electromagnetic (EMC)

Katin IOCR2 yana ba da tsangwama na lantarki (EMI) da kuma kariya ga duk siginar shigarwa, wanda ya dace da ka'idoji masu zuwa:

• Serial fieldbus interface (RS-485) keɓewar ƙarfin lantarki: 700 V₍RMS₎;

• Ethernet filin bus interface keɓewar ƙarfin lantarki: 1500 V₍RMS₎;

• Ya dace da ka'idodin EMC kamar EN 61000-6-2 da EN 61000-6-4.

4. Alamar Matsayi da Bincike

Kwamitin gaban katin IOCR2 yana sanye da alamomin LED da yawa don nunin matsayin sadarwa na ainihi:

• Alamar haɗin kai / Ayyuka don FIELDBUS1 da FIELDBUS2;

• Alamar haɗi / Ayyuka don ETHERNET1 da ETHERNET2;

• Yana goyan bayan zazzage rajistan ayyukan bincike ta software na VibroSight don sauƙaƙe tsarin kula da matsala.

5. Zafafa-Musanya da Kanfigareshan Ta atomatik

Katin IOCR2 da CPUR2 biyu suna goyan bayan canjin zafi, yana ba da damar maye gurbin katin ba tare da kunna tsarin ba. Tsarin yana gane ta atomatik kuma yana sake daidaita katunan, yana inganta ingantaccen tsarin da ingantaccen aiki.

---

Ƙa'idar Aiki

1. Tsarin Gine-gine da Gudun Bayanai

Katin IOCR2 yana aiki azaman hanyar sadarwa da tsawaita sigina don CPUR2, musayar bayanai tare da CPUR2 ta hanyar VM600 rack backplane. Tsarin aikinsa shine kamar haka:

• Samun Bayanai: CPUR2 yana samun bayanai daga katunan kariya kamar MPC4 ta hanyar bas ɗin VME, ko daga katunan saka idanu kamar XMX16 ta hanyar tsarin Ethernet;

• Gudanar da Bayanai: CPUR2 yana aiwatar da aikin lissafi akan bayanan da aka samu (misali, ayyukan ƙididdiga, hukunce-hukuncen ma'ana, ƙima, gano matsananciyar ƙima);

• Fitar Bayanai: Ana aika bayanan da aka sarrafa zuwa tsarin ɓangare na uku (misali, DCS, PLC) ta hanyar mu'amalar bus ɗin filin IOCR2 (Modbus TCP ko PROFIBUS DP);

• Martanin Matsayi: Relays akan IOCR2 na iya jawowa dangane da yanayin tsarin ko bayanin ƙararrawa, fitar da siginonin tuntuɓar busassun.

2. Ka'idojin Sadarwa da Topology na hanyar sadarwa

• Modbus TCP: IOCR2 yana aiki azaman na'urar bawa, yana amsa buƙatun karantawa / rubuta daga manyan na'urori, yana tallafawa har zuwa rajista na 131,072 da coils;

• PROFIBUS DP: IOCR2 yana aiki a matsayin bawa na DP-V0, kowane mai dubawa yana goyan bayan shigarwar 244 da fitarwa ta bytes;

• Network Topology: Yana goyan bayan hanyoyin haɗin kai-zuwa-maki ko madaidaiciya (daisy-chain), wanda ya dace da mahallin cibiyar sadarwar masana'antu mai rikitarwa.

3. Keɓewar Wutar Lantarki da Kariyar Sigina

Dukkan musaya na waje na katin IOCR2 suna da keɓancewar lantarki, yadda ya kamata ke hana tsangwama na madauki na ƙasa, haɓakawa, da tsangwama na lantarki, tabbatar da ingantaccen tsarin aiki a cikin matsanancin yanayin masana'antu.

4. Kanfigareshan da Gudanarwa

Katin IOCR2 kanta baya buƙatar tsari mai zaman kansa. Katin CPUR2 ya daidaita aikinsa gaba ɗaya ta amfani da software na VibroSight. Masu amfani za su iya loda fayilolin sanyi na bus filin ta hanyar VibroSight Configurator don ayyana dabarun sarrafa bayanai, taswirar relay, da sigogin sadarwa.

---

Takaitaccen Bayanin Fasaha

• Bukatun Wutar Lantarki: Ƙarfafawar wutar lantarki ta VM600 RPS6U, 5 VDC, max. amfani da wutar lantarki 7.5 W;

• Zazzabi na Aiki: 0 ° C zuwa 65 ° C (dangane da nauyin watsawa);

• Hanyoyin Sadarwa:

• 2x Tsarin Ethernet (10/100/1000BASE-T);

• 2x Filin tashar jiragen ruwa na Fieldbus (kowanne yana ɗauke da RS-485 guda ɗaya da keɓancewar Ethernet guda ɗaya);

• Relays: 2x SPDT, 5 A / 240 VAC;

• Masu haɗawa: Haɗa D-sub, RJ45, da nau'ikan tashoshi, suna tallafawa shigarwa mai sauri;

• Yarda da: CE, EN 61010-1, EN 61326-3-1, RoHS, da sauransu.

---

Yanayin aikace-aikace

Ana amfani da katin IOCR2 sosai a cikin al'amuran masu zuwa:

• Kariyar rawar jiki da kula da yanayin yanayin turbin tururi, iskar gas, da injin turbin ruwa a cikin wutar lantarki;

• Kula da injunan jujjuyawa kamar compressors, famfo, da magoya baya a cikin masana'antar mai da iskar gas;

• Saka idanu mai tsaka-tsaki da haɗin bayanan don kayan aiki na ma'auni na shuka (BOP);

• Haɗin kai tare da tsarin sarrafawa kamar DCS da PLC don raba bayanai da haɗin haɗin kai.