GE IS200TRPAH2A Jirgin Tafiya na Farko na Jirgin Sama

IS200TRPAH2A shine Jirgin Tafiya na Farko na Aeroderivative wanda General Electric (GE) ya tsara don Tsarin Sarrafa Mark VIe™. Wannan kwamiti shine sigar a cikin jerin TRPA musamman don ƙimar lamba na fitarwa na 125 V dc, da farko ana amfani da shi don tsarin kariya na gaggawa a cikin injin iskar gas, samar da kariya mai saurin gudu, dakatarwar gaggawa, da ayyukan sarrafa balaguro.

Hukumar IS200TRPAH2A na iya aiki tare da fakitin I/O guda uku don samar da tsarin kariya na Modular Modular Redundant (TMR). Hukumar ta ƙunshi tashoshin shigarwa da yawa da fitarwa, gami da abubuwan shigar da sauri, abubuwan gano ƙarfin lantarki, shigarwar dakatarwar gaggawa ta E-Stop, da abubuwan da aka zaɓa TMR. Jumpers suna ba da izinin sassauƙan daidaitawa na rarraba siginar shigar da sauri don dacewa da buƙatun tsarin daban-daban.

Mabuɗin fasali na IS200TRPAH2A sun haɗa da:

• Sadaukarwa don Turbin na Aeroderivative: Ya dace da tsarin kariya na gaggawa a cikin injin turbin iskar gas.

• Sau uku Modular Redundant (TMR) Taimako: Yana aiki tare da fakitin I/O guda uku don cimma ingantaccen ingantaccen kulawar kariya.

• 125 V dc Output Lambobin sadarwa: Lambobin tafiya da aka ƙididdige su a 125 V dc, dace da daidaitattun ƙarfin sarrafa masana'antu.

• Abubuwan shigar da Sauri da yawa: Yana goyan bayan ƙwanƙwasa saurin maganadisu 12 ko 6 masu ɗaukar saurin TTL masu aiki.

• Abubuwan Gano Wutar Lantarki: 4 keɓaɓɓen da'irar gano wutar lantarki don lura da matsayin ƙarfin lantarki a cikin kirtan tafiya.

• E-Dakatar da Shigar Gaggawa: 1 shigarwar dakatarwar gaggawa ta kasa-lafiya, 24-125 V dc, tare da lokacin amsa hardware <5 ms.

• Amsa Tafiya Mai Sauri: Lokacin amsawar kewayawa ta E-Stop <5 ms, da lokacin amsawar tafiya <1 ms, yana haifar da amsa gabaɗaya cikin sauri.

• Gano Gajeren Da'irar: Gina-ginen tuntuɓar hanyar sadarwa gajeriyar da'ira don tabbatar da amincin tafiya.

• Abubuwan shigar da Sauri mai iya daidaitawa: Jumpers JP1 da JP2 suna ba da damar zaɓin hanyar rarraba siginar shigar da sauri.

• Identification Chip ID: Masu haɗin haɗin suna ƙunshi guntun ID masu karantawa kawai waɗanda ke adana bayanan allo don tabbatarwa ta fakitin I/O.

Jirgin yana auna 33.0 cm tsayi × 17.8 cm faɗi, yana amfani da fasahar dutsen ƙasa, kuma ya dace da shigar da majalisar sarrafa masana'antu.

---

II. Babban Ayyuka

Ayyukan farko na IS200TRPAH2A sun haɗa, amma ba'a iyakance su ba, masu zuwa:

1. Shigar Siginar Sauri

Kwamitin IS200TRPAH2A yana ba da zaɓuɓɓukan shigar da sauri da yawa:

• 12 Zazzage Gudun Magnetic Mai Motsawa: 4 a kowane ɓangaren TMR (R, S, T) don auna saurin injin turbine.

• 6 Zaɓuɓɓukan Saurin TTL masu aiki: 2 kowane ɓangaren TMR azaman madadin.

Jumpers JP1 da JP2 suna saita rarraba shigar da sauri:

• Kowane fakitin I/O yana karɓar abubuwan shigar da sauri 4 keɓe.

• Abubuwan shigar da sauri guda 4 daga sashin R ana fitar da su zuwa fakitin S da T I/O.

Matsakaicin shigar da sauri ya dogara da mitar: 24 mV pp mafi ƙarancin 2 Hz, 276 mV pp mafi ƙarancin 20 kHz. Adadin bugun bugun jini shine 2 Hz zuwa 20 kHz tare da daidaiton 0.05% na karatu.

2. Abubuwan da aka zaɓa na TMR Tafiyar Tafiya

IS200TRPAH2A yana ba da sakamakon zaɓen TMR guda biyu don tuƙi babban coil. Kowace tuntuɓar tafiya ta ƙunshi na'urori 6 masu zaman kansu na Form A waɗanda aka tsara cikin tsarin zaɓe. Duk masu kula guda biyu da ke kada kuri'a don rufewa za su kafa hanyar gudanarwa.

Ƙididdigar Tuntuɓi (Sigar H2A):

• Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙwara: 125V dc

• Nauyin Juriya: 1 A dc

• Load ɗin Ƙarfafawa (L/R = 7 ms, babu ƙuntatawa): 1 A dc

• Load da aka haɗa (L/R = 100 ms, tare da danniya): 1 A dc

• Ƙayyadaddun Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙirar Wuta: Max ƙarfin lantarki ≤200 V dc

• Ƙididdigar lamba: NEMA Class F, mafi ƙarancin ayyuka: 100,000

Muhimman Bayanan kula:

• Abubuwan da aka haɗa suna da hankali. Waya da'irar a hankali don guje wa lalata relays.

• Babu lamba ko solenoid kashewa. Dole ne masu amfani su ƙara danne solenoid na waje don guje wa lalata relays da lambobin sadarwar su.

3. Abubuwan Gano Wutar Lantarki

IS200TRPAH2A yana ba da maƙasudin maƙasudi 4 keɓaɓɓen abubuwan firikwensin ƙarfin lantarki. Ana iya amfani da waɗannan don saka idanu kowane maki a cikin tsarin tafiya da kuma ciyar da yanayin ƙarfin lantarki a cikin mai sarrafa tsarin. Aikace-aikace na yau da kullun sun haɗa da saka idanu akan ƙarfin wutar lantarki don igiyoyin tafiya guda biyu da jin ƙarfin lantarkin solenoid na na'urar da ke motsawa ta hanyar relays.

Ƙayyadaddun Abubuwan Shigar Wutar Lantarki:

• Ƙimar Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarfafawa: 16/140 V dc max pk

• Matsakaicin Leaka A halin yanzu: 3mA

• Matsakaicin Jinkirin Ganewa: 60 ms

• Keɓewar Wutar Lantarki: Keɓewar gani, 2500 V rms na minti ɗaya

• Ƙimar Ƙarfafawa/Spike: 1000 V pk don 8.3 ms

4. E-Stop Shigar Dakatar da Gaggawa

IS200TRPAH2A ya haɗa da aikin E-Stop, wanda ya ƙunshi keɓaɓɓen da'irar shigarwar da aka tsara don shigarwar DC a cikin kewayon 24 zuwa 125 V mara kyau. Lokacin da aka sami kuzari, da'irar tana ba da wutar lantarki a cikin da'irori na R, S, da T ta hanyoyin kayan aiki masu zaman kansu.

Ƙayyadaddun shigarwar E-Stop:

• Wutar Shigarwa: 24-125V dc ± 10% (18/140 V pk Min/Max)

• Matsakaicin Loading: 12mA (5mA na yau da kullun)

• Matsakaicin jinkiri: 5 ms (<1 ms na al'ada)

Muhimman Halaye:

• Lokacin amsawar kewayawa ta E-Stop shine <5 ms. Ƙara zuwa lokacin mayar da martani na <1 ms, wannan yana ba da amsa E-Stop cikin sauri.

• Kunshin I/O ne ke kula da E-Stop, amma aikin cire ikon jujjuyawar tafiya gaba ɗaya yana cikin kayan aikin TRPA.

• Siginar E-Stop da aka ruwaito a ToolboxST an kulle shi ta firmware kuma yana buƙatar Sake saitin Jagora don share wannan matsayi.

• Dole ne a haɗa E-Stop zuwa tushen CLEAN dc - baturi ko tace (<5% ripple) gyara ac.

• Dole ne a sami mafi ƙarancin 18 V dc a abubuwan shigar da TRP don aiki mai kyau. Abun da ake buƙata na yanzu an kiyaye ƙasa don rage raguwar ƙarfin wutar lantarki akan dogayen tafiyar USB.

5. Gajerun Sadarwa

Don kiyaye amincin tuƙuru, IS200TRPAH2A yana amfani da da'ira mai ji ga kowane saƙon relays. Lokacin da aka umarci relays don buɗewa kuma ƙarfin lantarki ya kasance a cikin relays, kewayawa yana gano idan ɗaya ko fiye da relays ya gajarta. Wannan siginar yana zuwa fakitin I/O don ƙirƙirar ƙararrawa. Da'irar ji tana amfani da umarnin gudu-duguwa daga duk fakitin I/O guda uku don guje wa alamar ƙarya idan fakitin I/O ɗaya ya rufe yayin da sauran biyun za su buɗe.

6. Kanfigareshan Fasahar Input Mai Sauri

Jumpers JP1 da JP2 suna saita ko an fitar da abubuwan shigar da sauri 4 daga sashin R zuwa fakitin S da T I/O:

• Ba a yi amfani da masu tsalle-tsalle ba (an adana su a matsayin STORE): Kowane saiti na abubuwan shigar da bugun jini 4 yana zuwa fakitin I/O da aka keɓe.

• Jumpers da aka yi amfani da su (wanda aka sanya sama da nau'i-nau'i na fil): Ana fitar da abubuwan shigar da saurin sashe na 4 R zuwa duk fakitin I/O. Sashen S da T na shigar da saurin shigar da sauri sun zama babu haɗin kai kuma bai kamata a yi amfani da su ba.

  
  

---

III. Aikace-aikacen Tsarin

1. Aikace-aikace a cikin Tsarin Kariyar Turbine na Aeroderivative

IS200TRPAH2A ita ce babbar tashar tashar jiragen ruwa don tsarin kariyar turbin iskar gas. Yin aiki tare da fakitin I/O guda uku (PTUR ko YTUR), yana samar da tsarin kariya na gaggawa na Modular Redundant (TMR). Ayyukansa a cikin tsarin sun haɗa da:

• Kariya mai saurin wuce gona da iri: Yana sa ido kan saurin injin injin ta hanyar ɗaukar sauri kuma yana haifar da balaguro lokacin da saurin ya wuce wuraren saita.

• Tsaida Gaggawa: Yana karɓar sigina tashawar gaggawa ta waje ta hanyar shigarwar E-Stop, da sauri mai ƙarfi zuwa mitocin tafiya.

• Ikon Tafiya: Yana fitar da babban mai karyawa ta hanyar zaɓen TMR don aiwatar da rufewar gaggawa.

• Kula da Matsayi: Yana lura da ƙarfin wutar lantarki da ƙarfin lantarki na solenoid a cikin igiyar tafiya ta hanyar abubuwan gano wutar lantarki.

• Ganewar Kuskure: Yana sa ido kan halin tuntuɓar ta hanyar gajeriyar da'irar gano da'ira, gano kurakurai da sauri.

2. Bambance-bambance daga sigar H1A

Babban bambanci tsakanin IS200TRPAH2A da sigar H1A shine ƙimar lamba ta fitarwa:

Sigar H2A ta dace da aikace-aikacen masana'antu da ke buƙatar ƙarfin sarrafa wutar lantarki na 125 V dc, yayin da H1A na tsarin 24 V dc ne.

3. Safety Certified Versions

Takardar ta ambaci nau'ikan IS200TRPAS1A da IS200TRPAS2A, waɗanda IEC 61508 amintattu ne don amfani tare da YTUR. IS200TRPAH2A daidaitaccen sigar masana'antu ne, ba a ambace shi azaman amintaccen bokan ba, amma yana dacewa da nau'ikan aminci.

4. Yanayin Aikace-aikace na al'ada

• Aeroderivative Gas Turbines: Kariyar gaggawa don jerin LM da sauran turbin iskar gas.

• Injin Gas na Masana'antu: Ya dace da injin iskar gas na masana'antu da ke buƙatar ƙarfin sarrafa wutar lantarki na 125 V dc.

• Kariyar Generator: Yana aiki azaman hanyar haɗin gwiwa don janareta babban tsarin kariya.

• Kariyar kwampreso: Ana amfani da shi don kariyar wuce gona da iri da tsayawar gaggawa a cikin manyan kwampressors na masana'antu.

  
  

---

IV. Cikakken Bayanin Interface

1. Ƙididdigar Ƙirar Tasha

Kowane shingen tasha zai iya karɓar wayoyi biyu na AWG #12 kuma ana iya toshe shi don sauƙaƙe wayoyi da kiyayewa a kan shafin. Tushen ƙarewar garkuwa da ke haɗe zuwa ƙasan chassis yana nan da nan zuwa hagu na kowane shingen tasha.

2. Kanfigareshan Jumper

3. Ƙa'idar Fil Mai Haɗi Bayanin

Fil	Siginar	Sunan
1-2	VSEN1_A/B	Shigarwar Gano Wutar Lantarki 1
3-4	VSEN2_A/B	Shigarwar Gano Wutar Lantarki 2
5-6	VSEN3_A/B	Shigarwar Gano Wutar Lantarki 3
7-8	VSEN4_A/B	Shigarwar Gano Wuta 4
9	K1DCN	Tafiya Relay 1 Mara kyau
10	K1DCP	Tafiya Relay 1 Mai Kyau
13	K2DCN	Tafiya Relay 2 Korau
14	K2DCP	Gudummawar Tafiya 2 Mai Kyau
15	E-TRP	E-Tsaya Shigar
16	E-TRPR	E-Dakata Dawowa
17	P24O	24V fitarwa (don E-Stop ikon)
18	P24R	24V dawo
19-20	TTL2_T/TTL1_T	T Sashe na TTL Gudun Shigarwa
21-22	TTL2_S/TTL1_S	Sashe na S TTL Abubuwan Shiga Sauri
23-24	TTL2_R/TTL1_R	Abubuwan Shigar Sauri na Sashen TTL
25-26	PR1_TH/PR1_TL	T Sashen Shigar da Gudun Motsawa 1
27-28	PR2_TH/PR2_TL	T Sashen Shigar da Gudun Motsawa 2
29-30	PR3_TH/PR3_TL	T Sashe na Shigar Gudun Motsawa 3
31-32	PR4_TH/PR4_TL	T Sashe na Shigar Gudun Motsawa 4
33-34	PR1_SH/PR1_SL	Sashe na Shigar Gudun Motsawa 1
35-36	PR2_SH/PR2_SL	Sashe na Shigar Gudun Motsawa 2
37-38	PR3_SH/PR3_SL	S Sashen Shigar da Gudun Gudun wucewa 3
39-40	PR4_SH/PR4_SL	Sashe na Shigar Gudun Motsawa 4
41-42	PR1_RH/PR1_RL	Sashe na R Input Input Gudun Wuce 1
43-44	PR2_RH/PR2_RL	Sashe na R Input Input Gudun Gudun wucewa 2
45-46	PR3_RH/PR3_RL	R Sashe na Shigar Gudun Gudun wucewa 3
47-48	PR4_RH/PR4_RL	Sashe na R Input Input Gudun Wuce 4

---

V. Ka'idojin Aiki

1. Tsarin Tsarin

Hukumar IS200TRPAH2A tana da hanyoyin aikace-aikace guda biyu:

• An yi amfani da shi tare da TTUR: Lokacin da aka yi amfani da allon tashar TTUR don riƙe fakitin I/O guda uku, ana iya haɗa TRPA ta amfani da igiyoyi guda uku tare da masu haɗin fil na DC-37 akan kowane ƙarshen. A cikin wannan yanayin, TRPA tana ba da abubuwan da aka zaɓe na tafiye-tafiye na lamba biyu, E-Stop, da firikwensin wutar lantarki guda huɗu. Abubuwan shigar da sauri na TRPA ba su aiki kuma bai kamata a haɗa su ba.

• Fakitin I/O An Hana Kai tsaye: Fakitin I/O guda uku ana hawa kai tsaye akan TRPA. A cikin wannan yanayin, abubuwan shigar da sauri na TRPA sun zama hanyoyi masu aiki a cikin fakitin I/O, suna ba da izinin mafita na farko na jirgi guda ɗaya. Ayyukan Simplex ba zai yiwu ba.

2. Ka'idodin Aiki Relay

Ana yin tafsirin tafiye-tafiye ta hanyar amfani da saiti na na'urori guda shida na Form A da aka tsara a tsarin jefa ƙuri'a. Duk masu sarrafawa biyu da suka kada kuri'a don rufewa za su kafa hanyar gudanarwa ta hanyar saiti. Don gano gajeriyar relays, ana amfani da da'ira mai ji akan kowane saƙon relays. Lokacin da aka umarci relays don buɗewa kuma ƙarfin lantarki ya kasance a cikin relays, kewayawa yana gano idan ɗaya ko fiye da relays ya gajarta. Wannan siginar yana zuwa fakitin I/O don ƙirƙirar ƙararrawa.

3. E-Stop Operating Principle

Aikin E-Stop ya ƙunshi keɓaɓɓen da'irar shigarwar gani. Lokacin da aka sami kuzari, da'irar tana ba da wutar lantarki a cikin da'irori na R, S, da T ta hanyoyin kayan aiki masu zaman kansu. E-Stop yana kula da fakitin I/O, amma aikin don cire ikon jujjuyawar tafiye-tafiye gabaɗaya yana cikin kayan aikin TRPA, yana tabbatar da saurin amsawa da babban dogaro.

Muhimman Bayanan kula:

• Siginar E-Stop da aka ruwaito a ToolboxST an kulle shi ta firmware kuma yana buƙatar Sake saitin Jagora don share wannan matsayi. Gaskiya yana nuna kammalawar da'ira ta E-Stop. Ƙarya tana nuna asarar E-Stop tun lokacin Sake saitin Jagora na ƙarshe, ba yanayin da'irar E-Stop na yanzu ba.

• Idan mai amfani ba ya buƙata ko amfani da E-Stop, to, tsalle tushen wutar lantarki na gida na TRP (P240 da P24R) zuwa abubuwan shigar TRP daban-daban a hukumar tasha.

  
  

---

VI. Bincike da Kanfigareshan

1. Ayyukan Bincike

IS200TRPAH2A tana yin gwaje-gwaje masu zuwa ta hanyar fakitin I/O:

Ana iya kulle siginonin ganowa daban-daban kuma a sake saita su tare da siginar RESET_DIA bayan dawowar al'ada.

2. Hanyar Kanfigareshan

Kanfigareshan IS200TRPAH2A ana yin su ta hanyar jumpers JP1 da JP2 don zaɓar hanyar shigar da sauri. Ana kammala wasu saitunan ta hanyar fakitin I/O da software na ToolboxST.

---

VII. Shigarwa da Kulawa

1. Kariyar Shigarwa

• 240V ac Aikace-aikacen Gargaɗi: A cikin aikace-aikacen 240 V ac, kar a haye haɗin 240 V ac da ƙarfin lantarki na DC da gangan. Ƙarfin wutar lantarki zai wuce ƙimar Transorb, yana haifar da gazawa.

• 120V ac Aikace-aikace: A cikin 120 V ac aikace-aikace, Transorb rating na iya jure kololuwar ƙarfin lantarki ba tare da haifar da gazawa.

• E-Stop Wiring: Dole ne a haɗa E-Stop zuwa tushen DC mai tsabta. Yi amfani da kebul na murɗaɗɗen-biyu kuma ka guje wa yin aiki tare da igiyoyin AC.

• Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙwararren Ƙimi ne mai Ƙaƙƙƙƙƙƙaƙƙƙƙƙƙƙƙƙƙƙƙƙ irƙi ne ne. Waya da'irar a hankali don guje wa lalata relays.

2. Shawarwari na Kulawa

• Dubawa lokaci-lokaci: Bincika cewa tubalan tasha suna cikin amintaccen toshe kuma wayoyi ba su kwance ba.

• Tsaftacewa: Tsaftace allo akai-akai don hana tara ƙura.

• Kariyar ESD: Sanya madauri na ƙasa lokacin sarrafa allon kuma adana shi a cikin jakunkuna masu tsayayya.

• Sarrafa Sassan Kayan Aiki: Kula da allon TRPAH2A don rage raguwar lokacin rashin nasara.

---