GE IS200SRLYH2A(IS200SRLYH2AAA) Simplex Relay Output Board

IS200SRLYH2A babban aiki ne, babban madaidaicin madaidaicin Simplex Relay Output Terminal Board, wanda aka tsara don amfani tare da fakitin PDOA ko YDOA I/O a cikin tsarin sarrafa Mark Ve. A matsayin memba na dangin kwamitin tashar tashar S-type, yana ba da tashoshi na fitarwa na Form C mai zaman kansa 12 (canzawa) da aka haɗa ta tashoshi na abokan ciniki 48, waɗanda ke da ikon tuƙi kai tsaye daban-daban masu kunna filin kamar bawuloli, masu farawa mota, da fitilun nuna alama.

Babban fasalin wannan allon tasha shine yanayin yanayinsa da girmansa. IS200SRLYH2A da kanta an sanye shi da tubalan tasha irin na Yuro, mai sauƙin sauƙaƙe wayoyi da kulawa. Mafi mahimmanci, yana tanadin mahaɗa biyu (JW1, JW2) waɗanda za su iya ɗaukar nauyin allo na zaɓi iri-iri tare da ayyuka daban-daban. Wannan yana ba da damar aikin fitarwa na gama-gari don daidaitawa zuwa sassauƙan rarraba wutar lantarki daban-daban da yanayin aikace-aikacen gano kuskure, samun babban matsayi na gyare-gyare.

---

II. Mabuɗin Siffofin & Ayyuka

1. Basic Relay Output Aiki

• Yawan Tashoshi: Tashoshi 12 masu zaman kansu.

• Nau'in Tuntuɓi: Kowane relay nau'in nau'in C ne, yana ba da Common (COM), Buɗaɗɗen Al'ada ɗaya (NO), da lamba ɗaya Rufe (NC), yana ba da matsakaicin sassaucin wayoyi.

• Load Capacity: Relay lambobin sadarwa suna amfani da azurfa cadmium oxide abu, bayar da dogon wutar lantarki (100,000 ayyuka) da kuma inji (10,000,000 ayyuka). Ƙarfin lodi ya bambanta da ƙarfin lantarki:

• 24V DC Aiki: Max nauyi na yanzu 3.15 A.

• 120/240V AC Aiki: Max nauyi na yanzu 3.15 A.

• 48V DC Aiki: Max nauyi na yanzu 1.2 A.

• 125V DC Aiki: Max nauyi na yanzu 0.6 A.

• Lokacin Amsa: Yawancin lokacin mayar da martani shine 25 ms, yana biyan buƙatun sarrafawa cikin sauri.

2. Matsayin Ganewar Magani

Kowane gudun ba da sanda akan IS200SRLYH2A ya haɗa da saitin adireshi na taimako, keɓe gabaɗaya daga lambobi masu ɗaukar nauyi, sadaukar da kai don mayar da martani ga matsayi. Ana aika wannan siginar martani zuwa fakitin PDOA mai alaƙa ko YDOA I/O. Ta hanyar kwatanta umarnin sarrafawa tare da ainihin yanayin lambobin amsawa, tsarin zai iya tantancewa a cikin ainihin-lokaci ko na'urar relay ya samu nasarar ja ko fita, ta haka ne za a gano kurakuran na'urar na'urar relay ko gazawar injin na'urar da kanta, yana haɓaka amincin tsarin sosai.

3. Zaɓin Faɗaɗɗen Allo Daughter (Core Advantage)

Ƙarfin gaskiya na IS200SRLYH2A yana cikin ikonsa na faɗaɗa ayyuka ta hanyar ɗaukar allunan 'yan mata na zaɓi daban-daban. Waɗannan allunan ƴan mata suna toshe kai tsaye zuwa masu haɗin tashar tasha, ba sa buƙatar ƙarin wayoyi.

a) IS200WROB Daughterboard
Wannan kwamiti yana jujjuya IS200SRLYH2A zuwa aiki daidai da allon tashar TRLY_1B, yana ba da rarraba wutar lantarki da cikakken bincike.

• Rarraba Wutar Lantarki: Yana ba da rarraba wutar lantarki guda biyu-fused da kulawa don relays shida na farko (Relays 1-6) (watau, duka hanyoyin samarwa da dawowa suna hade). Wannan ƙirar ta dace musamman don tsarin wutar lantarki na DC da ke shawagi game da ƙasa, mai iya gano fis ɗin da aka hura a kowane gefe.

• Ƙarfin Ƙarfin Ƙarfi: Yana ba da shigarwar wutar lantarki guda ɗaya da ba a haɗa ba don relay na 12th (Relay 12) ta hanyar haɗin JG1.

• Ganewa: Yana sa ido kan wutar lantarki mai motsa solenoid a ƙasan fis ɗin ta amfani da keɓantaccen mahallin gano wutar lantarki. Ana haifar da ƙararrawar ganowa idan ƙarfin lantarki ya faɗi ƙasa da 9 V DC.

b) IS200WROF Daughterboard
Wannan allon 'yar tana ƙara jerin fuse da ƙarfin gano wutar lantarki ga kowane gudun ba da sanda.

• Fusing Series: Yana canza ainihin tashar SOL don kowane relay zuwa madaidaicin wuri gama gari. Masu amfani za su iya zaɓar haɗa wutar lantarki ta waje zuwa ainihin tashar COM da ba a haɗa su ba ko zuwa tashar COM da aka haɗa, tana ba da damar sauyawa mai sauƙi a gefen wuta ko gefen ƙasa.

• Ganewar Wutar Lantarki: Kowane fuse yana sanye da keɓaɓɓen firikwensin ƙarfin lantarki wanda ba shi da ma'ana. Ko da an cire fis ɗin, wannan da'irar gano irin ƙarfin lantarki ta ci gaba da aiki, ana amfani da ita don gano matsayin ƙarfin lantarki a kan lambobi na gefen lodi (misali, don tabbatar da idan mai lamba ya sami kuzari da gaske), yana ba da damar mayar da martani ta keɓaɓɓen ƙarfin lantarki.

c) IS200WROG Daughterboard
Wannan allon 'yar yana ba da rarraba wutar lantarki mai ƙarewa guda ɗaya don duk relays 12.

• Rarraba Wutar Lantarki: Yana rarraba wuta daga wurin shigarwa gama gari (JF1) zuwa da'irar lodi na kowane relay, tare da fiusi mai zaman kanta a gefen wuta don kowane kewayawa. Ba a haɗa hanyar dawo da wutar lantarki ba.

• Ganewa: Hakanan ya haɗa da saka idanu kan matsayin fuse; Ana kunna ƙararrawar ganowa idan ƙarfin lantarki yana nan amma fis ɗin yana buɗe.

d) IS400WROH Daughterboard
Wannan ita ce mafi girman allo na rarraba wutar lantarki, yana ba da ingantaccen rarraba wutar lantarki da haɗaɗɗun bincike don duk relays 12.

• Fusing Dual-End Fusing: Yana ba da rarraba wutar lantarki mai haɗakarwa biyu don duk relays guda 12 (dukansu tabbatacce da kuma hanyoyin dawowa), suna ba da mafi girman matakin kariya.

• Cikakkun Bincike: Yana ba da keɓantaccen hangen nesa na ƙarfin lantarki akan bangarorin samar da wutar lantarki mai kyau da mara kyau, yana ba da damar tantance ainihin gazawar fiusi ta kowane bangare.

• Samar da Wutar Lantarki mai sassauƙa: Relay 12 na iya yin aiki da kansa ta amfani da haɗin JG1 ta hanyar cire masu tsalle JP12 da JP13, biyan buƙatun aikace-aikacen musamman.

• Zaɓin Sigar: Akwai nau'ikan nau'ikan guda biyu don ɗaukar nau'ikan wutar lantarki daban-daban: WROHH1 (14-60 V DC) da WROHH2 (60-145 V DC ko 90-265 V AC).

---

III. Cikakken Ƙa'idar Aiki

Aiki na IS200SRLYH2A da tsarin halittar sa tsari ne na haɗin gwiwa wanda ke haɗa tuki mai sarrafawa, sarrafa wutar lantarki, saka idanu na matsayi, da bincike na hankali.

1. Gudanar da Siginar Sarrafa & Tuƙi

1. Bayar da Umurni: Mai sarrafa Mark VIe yana aika umarnin fitarwa sakamakon sakamakon dabaru na sarrafawa ta hanyar IONet Ethernet zuwa fakitin I/O PDOA (ko YDOA) da aka haɗa.

2. Juya sigina & Tuƙi: Fakitin PDOA yana karɓar umarnin dijital kuma, ta hanyar da'irorin fitarwa na ciki, yana haifar da matakin sigina wanda ya isa ya fitar da coil na relay. Ana aika wannan siginar ta hanyar haɗin da ke bayan allon tasha (misali, JA1) zuwa gaɗaɗɗen ƙayyadaddun relay akan IS200SRLYH2A.

3. Relay Action: Relay Coil yana ƙarfafawa, yana samar da filin maganadisu wanda ke tafiyar da motsi na ciki, canza yanayin lambobi masu ɗaukar nauyi (COM, NO, NC) (misali, COM yana haɗi zuwa NO, yana cire haɗin kai daga NC), ta haka haɗawa ko cire haɗin wutar lantarki na na'urar filin waje da aka haɗa (misali, mota, haske, bawul ɗin solenoid).

2. Injiniyan Kula da Ra'ayoyin Matsayi

Wannan ita ce hanyar haɗin yanar gizon da ke tabbatar da amincin fitarwa. A lokaci guda tare da aikin relay:

1. Canjin Jiha na Tuntuɓi Saƙon: Lambobin bayanin karin taimako, waɗanda ke haɗe da injina amma keɓe ta hanyar lantarki daga lambobi masu nauyi, suna canza yanayin aiki tare.

2. Komawa Siginar Matsayi: Fakitin PDOA yana ci gaba da bincika matsayin waɗannan lambobin amsa kuma yana karanta su baya.

3. Kwatanta & Ganewa: Fakitin I/O ko firmware mai sarrafawa yana kwatanta matsayin mayar da martani tare da umarnin sarrafawa da aka bayar a baya a cikin ainihin-lokaci.

• Match: Yana Nuna Relay ya aiwatar da umarnin daidai; tsarin al'ada ne.

• Rashin daidaitawa: Misali, umarnin shine 'ON', amma ra'ayin ya nuna cewa tuntuɓar har yanzu tana 'KASHE'. Nan take tsarin ya haifar da ƙararrawar bincike ta 'Relay Fault' ko 'Matsayin Rashin Matsala', yana sanar da ma'aikacin kuskuren hardware.

3. Ingantacciyar Ƙa'idar Aiki tare da Allolin 'ya'ya na zaɓi

Ƙa'idar Rarraba Wutar Lantarki (WROB, WROG, WROH) Ƙa'idar Aiki
Waɗannan allunan 'yan mata suna ƙara rarraba wutar lantarki mai sarrafawa da kariya zuwa ainihin aikin relay.

• Gabatarwar Wuta: Ƙarfin jika na waje (zai iya zama AC ko DC) ana ƙaddamar da shi ta hanyar haɗin haɗin kai akan allon 'yar mata (misali, JF1, J1, JG1).

• Rarraba Wutar Lantarki & Kariya: Ana rarraba wutar lantarki zuwa da'irori guda ɗaya ta hanyar bugu na wayoyi akan allon 'yar mata. Fuses (yawanci tsoho 3.15A) ana haɗa su a jere a cikin da'irar azaman abubuwan kariya masu wuce gona da iri. WROB da WROH suna amfani da fusing mai ƙare biyu, masu ikon sarrafa ƙarin hadaddun yanayin kuskuren ƙasa.

• Haɗin Load: Lokacin da gudun ba da sanda ya ba da ƙarfi, ana ba da wutar da aka haɗa daga allon 'yar mata zuwa na'urar filin ta hanyar lambobi masu ɗaukar nauyi na relay (yawanci COM da NO).

Ƙa'idar Sa ido
Waɗannan allunan 'ya'ya mata suna amfani da da'irar gano wutar lantarki mai ƙarfi don sa ido mara kyau.

• Kulawa da Fuse: Ana haɗa firikwensin ƙarfin lantarki a gefen nauyin fis ɗin. Ka'idar aikinsa ita ce gano gaban ko rashin ƙarfin lantarki a wannan lokacin.

• Yanayi na al'ada: Fus ɗin ba shi da kyau. Idan wutar lantarki ta al'ada ce kuma an rufe kewaye, firikwensin yana gano ƙarfin lantarki kuma ya ba da rahoton 'Normal'.

• Fuse Blown: Bayan da fis ɗin ya buɗe, ko da an kunna bangaren samar da wutar lantarki, ba za a iya kafa wutar lantarki a gefen lodi ba. Na'urar firikwensin ba ta gano irin ƙarfin lantarki ba, don haka yana ba da rahoton 'Fuse Fault'.

• Kulawa da Wutar Lantarki: WROB da WROH kuma suna iya saka idanu kan ƙarfin kuzarin haɓakar solenoid, tabbatar da ƙarfin wutar lantarki da ke isa na'urar yana cikin kewayon aiki (misali, ba ƙasa da 9 V DC ba), ta haka ne ke gano batutuwa kamar sags na wuta ko faɗuwar wutar lantarki ta layi.

• Bayanin Bayanin Wutar Lantarki na Tuntuɓi (Aikace-aikacen Musamman na WROF): Lokacin da aka cire fiusi akan allo na WROF, ana iya amfani da da'irar gano wutar lantarki da kanta azaman mai gano wutar lantarki ta duniya. Misali, ana iya haɗa tashar ta VSENSE zuwa madaidaicin lamba na mai tuntuɓar filin don tabbatar da ko mai tuntuɓar ya shiga don wasu dalilai (ba a sarrafa shi ta wannan hanyar relay), yana ba da damar saka idanu akan matsayin na'urar ɓangare na uku.

4. Lantarki Identification & Tsarin Haɗin kai

Hukumar tashar tashar IS200SRLYH2A da duk allunan mata na zaɓi sun haɗa guntu ID ɗin lantarki kawai na karantawa. Wannan guntu tana adana bayanan na'urar kamar lambar serial, nau'in allo, lambar bita, da wurin haɗi. Lokacin da fakitin PDOA ya yi ƙarfi, yana karanta wannan bayanin ID kuma yana kwatanta shi tare da saitin kayan masarufi a cikin tsarin sarrafawa. Duk wani rashin daidaituwa nan da nan yana haifar da kuskuren 'Incompatibility Hardware', yana hana amfani da kayan aikin da ba daidai ba a cikin tsarin da kuma tabbatar da daidaiton tsari.

---

IV. Shigarwa

1. Injiniyan Shigarwa

1. Shirya abubuwan haɗin gwiwa: Haɗa allon tashar IS200SRLYH2A tare da insulator ɗin filastik mai rakiyar.

2. Dutsen Akan Mai ɗaukar kaya: Dutsen rukunin da aka haɗa akan ƙaƙƙarfan mai ɗaukar ƙarfe.

3. Hawan Majalisar Ministoci: Amintacce haša taron duka (allon tasha + insulator + mai ɗaukar kaya) a cikin majalisar sarrafawa akan farantin baya ko dogo ta amfani da sukurori. Girmansa na zahiri sun yi daidai da sauran allunan tasha na nau'in S don daidaitaccen jeri. Bayan shigarwa, tabbatar da cewa babu abubuwan haɗin gwiwa (ciki har da fakitin I/O da aka shigar daga baya) sun wuce tsayin da aka yarda da su don tallafawa yuwuwar tara allunan tasha, adana sarari.

2. Haɗin Wutar Lantarki

1. Wayawar Abokin Ciniki: Ana yin duk na'urorin na'urar filaye ta tashoshin abokan ciniki 48 a kan allo. Kowane relay yayi daidai da tashoshi 4:

• NC: Lambobin Rufe ta al'ada

• COM: Maganar gama gari

• A'a: Kullum Buɗe lamba

• SOL: Ayyukan wannan tasha ya dogara da ko kuma wace allon ɗiya na zaɓi aka yi amfani da shi. Lokacin amfani da IS200SRLYH2A kadai, wannan tasha yawanci ba a haɗa shi ba.

2. Haɗa Kunshin I/O: Toshe fakitin I/O PDOA kai tsaye cikin mahaɗin da ya dace a bayan allon tashar SRLYH2A (misali, JA1), yana tabbatar da haɗin gwiwa mai ƙarfi.

3. Shigar da allo na zaɓi: Idan kuna amfani da allo na zaɓi (misali, WROB, WROF, da sauransu), daidaita shi tare da masu haɗawa akan IS200SRLYH2A (JW1, JW2) kuma saka shi a tsaye. Ana riƙe shi a wurin da ƙarfin shigar mai haɗawa, yawanci baya buƙatar ƙarin kayan aiki ko masu ɗaure.

4. Haɗin Wutar Lantarki (idan ana amfani da allunan rarraba wutar lantarki): Idan ana amfani da allunan mata masu rarraba wutar lantarki kamar WROB, WROG, ko WROH, haɗa wutar lantarki ta waje zuwa ƙayyadaddun masu haɗin shigar da ke kan allo na ɗiyar (misali, JF1, J1, JG1) bisa ga buƙatun allon mata.

3. Kanfigareshan Jumper (Idan Ana buƙata)

• IS200SRLYH2A Babban Hukumar: Babu masu tsalle don saitawa.

• WROB Daughterboard: Ya haɗa da masu tsalle 6 (JP1-JP6) don haɗa wutar lantarki zuwa Relays 1-6. Duk masu tsalle suna cikin wurin daga masana'anta. Idan aka yi amfani da relay azaman busasshen lamba (ba a kunna ta ta allon diya ba), cire madaidaicin jumper.

• WROH Daughterboard: Ya haɗa da masu tsalle 13 (JP1-JP13) don haɗa wutar lantarki zuwa duk relays 12. Duk masu tsalle suna cikin wurin daga masana'anta. Idan ana amfani da relay azaman busasshen lamba, cire madaidaicin jumper. Don ba da iko mai zaman kansa zuwa Relay 12, cire JP12 da JP13.

• WROF & WROG Daughterboards: Babu masu tsalle-tsalle masu daidaitawa.

4. System Power-Up da Identification

Bayan kammala duk shigarwa na inji da lantarki, kunna tsarin. Fakitin PDOA I/O za ta karanta bayanan ID na lantarki ta atomatik na hukumar tashar IS200SRLYH2A da duk wani allo na zaɓin da aka shigar, yana tabbatar da su a kan daidaita tsarin sarrafawa don tabbatar da daidaiton haɗin kayan aikin.