Kwamitin Samar da Wutar Lantarki na GE IS210AEPSG1A

IS210AEPSG1A Hukumar Samar da Wutar Lantarki ce ta General Electric (GE) ta tsara don tsarin 2.x MW na Dindindin Magnet Generator (PMG). Wannan jirgi shine daidaitaccen sigar da ke cikin jerin AEPS, da farko ana amfani da shi don samar da tsayayye kuma abin dogaro DC ikon ikon sarrafawa a cikin wutar lantarki ta iska, yana tabbatar da aiki na yau da kullun na tsarin sarrafawa har ma a lokacin haɓakawa a cikin babban ƙarfin lantarki.

Hukumar IS210AEPSG1A tana taka muhimmiyar rawa a cikin tsarin sauya wutar lantarki. Yana jan wuta daga babban haɗin wutar lantarki na DC kuma yana jujjuya shi zuwa manyan keɓantattun wutar lantarki ta DC ta hanyar kewayawa na ciki. Waɗannan suna ba da ikon aiki don hukumar kula da MACC, allon dubawa daban-daban kamar AEAA, AEAC, AEAB, da hanyoyin sadarwa (CANbus, tashar tashar jiragen ruwa). Jirgin yana da alamun LED masu yawa don nunin matsayi na kowane ƙarfin fitarwa, maki gwaji da yawa don ma'aunin wurin da gano kuskure, da fis masu yawa don kariyar wuce gona da iri.

Mabuɗin fasali na IS210AEPSG1A sun haɗa da:

• Input na DC mai ƙarfi: Yana jan wuta kai tsaye daga mahaɗin DC, kewayon ƙarfin shigarwa mai faɗi.

• Abubuwan da aka keɓance da yawa: Yana ba da keɓancewar wutar lantarki na DC da yawa don saduwa da buƙatun da'irori daban-daban.

• Alamar Matsayi: Alamun koren LED da yawa suna nuna matsayin kowane irin ƙarfin lantarki na fitarwa.

• Maƙallan Gwaji: An sanye shi da wuraren gwaji da yawa don dacewa da ma'aunin maɓalli na maɓalli.

• Cikakken Kariya: Kowane fitarwa ana kiyaye shi ta fuses, yana ba da kariya ta wuce gona da iri.

• Zane na Modular: Hukumar tana hawa a cikin CMC ko Thread Converter cabinet, tana haɗawa da tsarin ta hanyar masu haɗawa.

• Kanfigareshan Jumper: Jumper JP1 yana saita yanayin aiki na hukumar (CMC ko majalisar mai canza zaren).

Hukumar tana da wuraren shigarwa guda biyu a cikin tsarin 2.x MW PMG na wutar lantarki:

• Converter Master Cabinet (CMC): Yana ba da iko da da'irori a cikin CMC.

• The Thread Converter Cabinet: Yana ba da iko da da'irori a cikin kowace majalisar zare mai jujjuyawar.

  
  

---

II. Babban Ayyuka

Babban ayyuka na IS210AEPSG1A sun haɗa da, amma ba'a iyakance su ba, masu zuwa:

1. Canjin Input na Babban Wuta na DC

Kwamitin IS210AEPSG1A yana karɓar shigarwar DC mai ƙarfi daga mahaɗin DC kuma yana haifar da ɗimbin barga mai ƙarancin ƙarfin wutar lantarki ta hanyar masu canza DC-DC na ciki. Ana kiyaye wutar lantarki ta shigarwa ta fuse FU1, wanda ba shi da alamar matsayi.

2. Abubuwan da aka ware na DC da yawa

Kwamitin yana ba da keɓantaccen ƙarfin fitarwa na DC da yawa don kaya daban-daban:

3. Alamar Matsayi

Hukumar tana da alamun koren LED masu yawa don nuna matsayin kowane ƙarfin fitarwa:

4. Abubuwan Gwaji

Hukumar tana da wuraren gwaji da yawa don dacewa da ma'aunin maɓalli na maɓalli a kan wurin:

5. Kariyar Fuse

Hukumar tana da fis masu yawa waɗanda ke ba da kariya ta wuce gona da iri ga kowane fitarwa:

6. Kanfigareshan Jumper

Jumper JP1 yana daidaita yanayin aiki na hukumar:

Jumper	Matsayin	Siffar
IN	Yanayin Majalisar Zare	An shigar da allon AEPS a cikin ma'ajin mai sauya zaren
FITA	Yanayin CMC	AEPS allon shigar a cikin Converter Master Cabinet

---

III. Aikace-aikacen Tsarin

1. Aikace-aikace a cikin 2.x MW PMG Wind Power Converter System

IS210AEPSG1A shine babban kwamitin samar da wutar lantarki don sarrafawa a cikin tsarin 2.x MW PMG mai sauya wutar lantarki. Ayyukansa a cikin tsarin sun haɗa da:

• Samar da Wutar Lantarki: Yana ba da tsayayyen ƙarfin DC don sarrafa allon a cikin CMC da kabad ɗin masu sauya zare.

• Samar da Wutar Lantarki: Yana ba da keɓantaccen wutar lantarki don tachometers, serial ports, da CANbus sadarwa musaya, yana tabbatar da ingancin sigina.

• 25 kHz Power Supply: Yana ba da ikon raƙuman murabba'in kHz 25 zuwa allon AEDB da AEBI don tuƙin ƙofar IGBT.

2. Aikace-aikace a cikin CMC

A cikin CMC, an shigar da hukumar IS210AEPSG1A a cikin majalisar CMC. Yana ba da iko ga hukumar CMC MACC ta hanyar haɗin P1 da kuma zuwa allon AEAA da AEAC ta hanyar P18A1/P18A2. Jumper JP1 yakamata a saita zuwa matsayin OUT a wannan yanayin.

3. Aikace-aikace a cikin ma'ajin Canjin Zaren

A cikin kowace majalisar mai canza zaren, ana ɗora allon IS210AEPSG1A akan ƙofar gefen majalisar. Yana ba da iko ga allon MACC ɗin Thread ta hanyar haɗin P1, zuwa allon AEAB ta hanyar P18A1, da ikon 25 kHz zuwa allon AEDB da AEBI ta hanyar P2. Jumper JP1 yakamata a saita shi zuwa matsayin IN a wannan yanayin.

4. Yanayin Aikace-aikace na al'ada

• Ikon Canja Wuta na Iska: Yana ba da wutar lantarki da yawa don tsarin sarrafawa na 2.x MW PMG masu sauya wutar iska.

• Canjin Wuta na Masana'antu: Ana amfani da shi a cikin tsarin sarrafa masana'antu da ke buƙatar keɓancewar samar da wutar lantarki.

• Tsare-tsaren Makamashi Masu Sabunta: Ana amfani da su a cikin tsarin sarrafawa don wasu nau'ikan masu canza makamashin da ake sabunta su.

  
  

---

IV. Cikakken Bayanin Interface

1. Input Interface

2. Abubuwan da ake fitarwa

3. Abubuwan Gwaji

4. LED Manuniya

5. Jumper JP1

Matsayin	Matsayi	Bayanin
IN	Yanayin Zare	An shigar da AEPS a cikin ma'ajin mai sauya zaren
FITA	Yanayin CMC	An shigar da AEPS a cikin Babban Cabinet na Converter

---

V. Bincike da Kulawa

1. Binciken Matsayin LED

Kwamitin IS210AEPSG1A yana ba da bincike na matsayi ta hanyar alamun LED kore 6:

2. Ma'aunin Gwaji

Yin amfani da multimeter don auna wuraren gwaji yana ba da damar tabbatar da sauri na ƙarfin fitarwa:

3. Matsalar gama gari

4. Shawarwari na Kulawa

• Dubawa lokaci-lokaci: Bincika matsayin alamar LED don tabbatar da duk abubuwan da aka fitar sun kasance na al'ada.

• Sauyawa Fuse: Koyaushe maye gurbin fiusi tare da takamaiman ƙayyadaddun bayanai iri ɗaya.

• Kariyar ESD: Sanya madauri na ƙasa lokacin sarrafa allon kuma adana shi a cikin jakunkuna masu tsayayya.

• Gudanar da Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Ƙasa ta Ƙaddamar da AEPSG1A don rage lokacin raguwa idan ya faru.

  
  

---

VI. Shigarwa da Sauyawa

1. Wuri Mai hawa

Ana iya hawa allon IS210AEPSG1A a cikin ko dai CMC ko majalisar mai canza zaren. Jumper JP1 dole ne a saita daidai gwargwadon wurin shigarwa.

2. Tsarin Sauyawa

Gargadin Tsaro:

• GARGADI: Don hana girgiza wutar lantarki, kashe wutar da ta dace kuma bi duk hanyoyin aminci na GE da ayyukan kullewa/tagout kafin maye gurbin allo.

• HANKALI: Don hana lalacewar ɓangarori da ke haifar da tsayayyen wutar lantarki, bi da duk alluna tare da dabarun kulawa a tsaye. Saka madauri na ƙasa da kuma adana alluna a cikin jakunkuna marasa ƙarfi.

Matakan Maye gurbin:

1. Tabbatar da Kashe Wutar Lantarki: Tabbatar cewa CMC ko Ministocin Zaren sun daina samun kuzari gaba ɗaya.

2. Bude Ƙofar Majalisar: Buɗe ƙofar majalisar da ta dace kuma nemo allon AEPS don maye gurbinsa.

3. Cire Haɗin Haɗin:

• Cire haɗin duk kayan haɗi da masu haɗawa da sauri daga allon.

• Cire garkuwar LEXAN.

• Cire kusurwoyi masu hawa huɗu na kusurwa huɗu da ƙwaya mai hawan tsakiya da ke tabbatar da allon.

4. Cire Tsohuwar allo: Ɗaga allon daga wurin hawa kuma cire tsohon allo.

5. Shigar Sabon allo:

• Daidaita sabon allo tare da ginshiƙai masu hawa da ramuka, tabbatar da gidan goro na tsakiya ya wuce ta cikin jirgi.

• Aminta da allo ta amfani da kusoshi masu hawa kusurwa huɗu da goro mai hawa na tsakiya.

6. Sake haɗa Haɗin kai:

• Sake haɗa duk kayan haɗi da masu haɗawa da sauri kamar yadda aka lakafta.

• Tabbatar da saitin jumper na JP1 daidai ne (IN: Yanayin zare; FITA: Yanayin CMC).

7. Tabbatar da shigarwa: Bincika cewa duk haɗin gwiwa amintattu ne.

8. Mayar da Wuta: Rufe ƙofar majalisar kuma mayar da wutar lantarki ga tsarin.