GE DS200TCRAG1A Relay Output Board

DS200TCRAG1A shine Hukumar Fitar da Kayan Relay wanda General Electric (GE) Tsarin Masana'antu ya ƙera don tsarin kula da injin turbine na Mark V LM. Kasancewa cikin jerin TCRA (Relay Output Board), wannan kwamiti wani ɓangare ne na ƙungiyar G1 kuma yana wakiltar bita A. An shigar dashi a matsayi na huɗu da na biyar na dijital I/O cores ( , , kuma ), Yin aiki a matsayin babban ɓangaren don sarrafa fitarwa mai hankali a cikin tsarin sarrafa Mark V LM.

Babban aikin hukumar fitarwa ta TCRA shine canza siginar sarrafawa daga tsarin sarrafawa (kwamitin TCDA ko hukumar TCQE) zuwa abubuwan da aka fitar don fitar da na'urorin filin kamar su solenoid valves, contactors, fitilun nuni, da ƙararrawa. Hukumar tana amfani da filogi-in lantarki relays tare da tsarin tuntuɓar Form C (1NO+1NC+COM), masu ɗaukar nauyi a matakan ƙarfin lantarki daban-daban, gami da 125 V dc, 28 V dc, 120 V ac, da 240 V ac. Ta hanyar masu tsalle-tsalle a kan allunan ƙarewa, ana iya daidaita wasu abubuwan da aka fitar azaman 'lambobin rigar' (wanda Mark V LM ke aiki da shi a ciki) ko 'bushe' lambobin sadarwa (masu ƙarfin waje) don ɗaukar buƙatun aikace-aikace daban-daban.

Kwamitin DS200TCRAG1A ya ƙunshi sadaukarwar GE don dogaro da sassauci a cikin sarrafa injin injin injin injin lantarki kuma yana fasalta halaye masu zuwa:

• Fitowar Relay Mai Maɗaukaki: Yana goyan bayan abubuwan fitarwa guda 30 a kowace allo.

• Zaɓuɓɓukan Kanfigareshan Mai sassauƙa: Za a iya saita abubuwan da aka fitar azaman abubuwan solenoid ko busassun bayanan tuntuɓar ta hanyar tsalle-tsalle na hardware akan allunan ƙarewar DTBC/DTBD.

• Tallafin Load da yawa: Ya dace da matakan ƙarfin lantarki daban-daban ciki har da 125 V dc, 28 V dc, 120 V ac, da 240 V ac.

• Tsarin Modular: Yana aiki tare tare da hukumar TCDA da allunan ƙarewa don samar da cikakken tsarin fitarwa na dijital.

• Reliable Electromagnetic Relays: Yana amfani da filogi-in relays na lantarki tare da doguwar rayuwar hulɗa da babban abin dogaro.

• Tallafin Fitarwa na Musamman: Wasu abubuwan fitarwa suna goyan bayan 120/240 V ac manyan lodi na yanzu, dacewa da masu canza wuta da aikace-aikace makamantansu.

Ana amfani da wannan samfurin sosai a cikin tsarin sarrafa injin turbin gas, tsarin sarrafa turbine, tsarin kariyar janareta, da aikace-aikacen sarrafa tsarin masana'antu daban-daban, musamman a aikace-aikacen sarrafa injin turbin da ke buƙatar sarrafa sarrafa fitarwa mai zurfi.

II. Maɓallin Ayyuka

1. Relay Output Control

Babban aikin hukumar DS200TCRAG1A shine canza siginar sarrafawa daga hukumar TCDA (dijital I/O core) ko hukumar TCQE (LM6000 I/O Processor) zuwa abubuwan da aka samu na sadarwa. Kowace fitarwa nau'in nau'in nau'in nau'in nau'in nau'in C ne, yana ba da buɗaɗɗen (NO), yawanci rufewa (NC), da na gama-gari (COM) haɗin haɗin waya uku. Abubuwan da aka fitar za su iya fitar da na'urorin filin daban-daban, gami da bawuloli na solenoid, masu tuntuɓar juna, fitilun nuni, da ƙararrawa.

2. Saitunan Relay Multiple

Kwamitin DS200TCRAG1A yana ba da jeri na yawan relay daban-daban dangane da wurin shigarwa:

3. Solenoid Output Kanfigareshan

Ta hanyar masu tsalle-tsalle na kayan aiki akan allon ƙarewa na DTBC da DTBD, ana iya saita wasu abubuwan fitarwa azaman kayan aikin solenoid (wanda Mark V LM ke aiki dashi) ko busasshen bayanan tuntuɓar (a waje):

• Fitowar Solenoid: Ciki mai ƙarfi ta Mark V LM mai sarrafa (125 V dc ko 120/240 V ac), yana jan kaya kai tsaye.

• Dry Contact Fitarwa: Yana ba da lambobin sadarwa na relay kawai; Ana ba da wutar lantarki ta kayan aiki na waje.

Ƙimar ƙayyadaddun iyawa kamar haka:

4. Babban Tallafin Fitarwa na Yanzu

Hukumar DS200TCRAG1A tana ba da ƙarin ƙarin abubuwan sadarwa guda biyu (#47 da #48) a matsayi na biyar (don kuma kore). Waɗannan abubuwan fitarwa suna karɓar ƙarfin 120/240 V ac ta hanyar haɗin J19 da J20 kuma suna iya fitar da manyan lodi na yanzu kai tsaye kamar su masu wuta. Waɗannan abubuwan fitarwa an saita su tare da masu tsalle kuma basu buƙatar ƙarin saiti.

5. Interface tare da Hukumar TCDA

Kwamitin DS200TCRAG1A yana haɗi zuwa allon TCDA ta hanyar haɗin JS1-JS8. Kowane mai haɗin JS ya yi daidai da abubuwan da aka fitar 4, tare da masu haɗin kai 8 da ke rufe abubuwan relay 30. A matsayi na hudu na core, hukumar TCRA tana karɓar siginar sarrafawa daga hukumar TCQE ta hanyar haɗin JO don sarrafa bawul ɗin busa da yawa.

6. Interface tare da Ƙarshe Allolin

Kwamitin DS200TCRAG1A yana fitar da lambobin sadarwa zuwa ga allon ƙarewa na DTBC ko DTBD ta hanyar haɗin JS1-JS8. Allolin ƙarewa suna ba da tashoshi na wayoyi, kuma masu tsalle-tsalle na kayan aiki akan waɗannan allunan suna tantance ko an saita abubuwan da aka fitar azaman abubuwan solenoid ko busassun kayan sadarwa.

III. Hardware Architecture

1. Tsarin allo

Kwamitin DS200TCRAG1A yana amfani da daidaitaccen tsarin da'ira da aka buga kuma an shigar dashi a cikin mai ɗaukar allo na dijital I/O cores. Hukumar ta hada da:

• Har zuwa 30 plug-in electromagnetic relays (K1-K30)

• JS1-JS8 Masu Haɗi: Don yin hulɗa tare da allon TCDA ko allon ƙarewa

• JO Connector: Don karɓar siginar sarrafawa daga hukumar TCQE (matsayi na huɗu kawai na tsakiya)

• JOR, JOS, JOT Connectors: Yawanci ba a amfani da su

2. Ƙididdigar Relay

Relays akan allon DS200TCRAG1A sune filogi na wutar lantarki tare da ƙayyadaddun lamba masu zuwa:

3. Bayanin Connector

4. Kanfigareshan Wuta

Ita kanta hukumar DS200TCRAG1A ba ta ƙunshi da'irori mai ƙarfi ba. Hukumar TCDA ko hukumar TCQE ce ke ba da wutar lantarki ga coils na relay. An samo wutar da ke gefen lamba daga core ko waje samar da wutar lantarki ta hanyar ƙare allon (DTBC/DTBD).

IV. Cikakken Bayanin Interface

1. JS1-JS8 Masu Haɗi

Masu haɗin JS1-JS8 sune haɗin kai tsakanin hukumar TCRA da allon TCDA ko allon ƙarewa. Kowane mai haɗin haɗin kai yayi daidai da abubuwan fitarwa guda 4:

2. JO Connector

Ana amfani da haɗin JO don karɓar siginar sarrafawa daga allon TCQE kuma ana amfani dashi kawai a matsayi na hudu na cibiya. Wannan mai haɗin yana watsa siginar sarrafawa daga allon TCQE zuwa hukumar TCRA don aikace-aikace na musamman kamar sarrafa busa-kashe gas da yawa.

3. JOR, JOS, JOT Connectors

Ba a saba amfani da waɗannan masu haɗin kai akan hukumar TCRA kuma an tanadar su don faɗaɗa aikin gaba.

V. Kanfigareshan da Saituna

1. Solenoid Output Kanfigareshan

Tsarin fitarwa na hukumar DS200TCRAG1A yana samuwa ta hanyar tsalle-tsalle na hardware akan allon ƙarewa na DTBC da DTBD, ba akan hukumar TCRA kanta ba. Hanyoyin daidaitawa sune kamar haka:

Note: A cikin core, hukumar TCRA a matsayi na hudu yana da 4 relays kawai da aka yi amfani da shi don sarrafa bawul ɗin busawa da yawa. Tsarinsa ya bambanta da daidaitaccen tsari; koma zuwa tsarin zane-zane don cikakkun bayanai.

2. Kanfigareshan Fitowa Mai Girma (#47, #48)

Tsarin abubuwan da aka fitar #47 da #48 sun haɗa da haɗa masu haɗin J19 da J20:

3. Kanfigareshan Software

Abubuwan da aka fitar a kan hukumar TCRA ana sarrafa su ta hanyar hukumar TCDA ko hukumar TCQE ta Tsarin Tsarin Sarrafa (CSP). Tsarin software ya haɗa da:

• Kunna fitarwa: Yana saita ko ana amfani da fitarwa ta hanyar Kanfigareshan I/O.

• Dabarar fitarwa: Matakan dabarar siginar da za a iya daidaitawa.

• Kanfigareshan Failsafe: Yana saita yanayin fitarwa yayin gazawar sadarwa.

VI. Shigarwa da Kulawa

1. Wuri Mai hawa

An shigar da hukumar DS200TCRAG1A a matsayi na huɗu da na biyar na dijital I/O cores ( , , ). A matsayi na hudu na core, hukumar TCRA tana sanye take da 4 relays kawai don sarrafa bawul ɗin busawa da yawa.

2. Matakan Shigarwa

1. Tabbatar da Wutar Lantarki: Kashe wuta zuwa abin tuƙi, jira mintuna kaɗan don fitarwar masu ƙarfin wutar lantarki, kuma gwada don tabbatar da cewa babu wuta.

2. Bude Ƙofar Majalisa: Shiga yankin allon wayar da aka buga.

3. Nemo Ramin: Tabbatar da ramin na huɗu ko na biyar na dijital I/O core yana samuwa.

4. Saka Hukumar: Daidaita allon TCRA tare da jagororin ramin kuma tura shi cikin sumul har sai masu haɗin jirgin baya sun cika aiki.

5. Tsare Panel ɗin Gaba: Tsara skru ɗin da aka kama a gaban panel don amintar da allo.

6. Haɗa Kebul:

• Haɗa igiyoyin ribbon JS1-JS8 zuwa allon TCDA ko allunan ƙarewa.

• Idan a matsayi na hudu na core, haɗa kebul na JO zuwa allon TCQE.

7. Kunnawa da Tabbatarwa: Bayan kunnawa, tabbatar ta hanyar sadarwa ta mai aiki cewa an gane tsarin daidai kuma yana sadarwa.

3. Matakan Cire

1. Tabbatar da Ƙarfin Ƙarfi: Tabbatar cewa an cire ƙarfin tsarin kuma tabbatar da cewa babu wutar lantarki.

2. Cire haɗin igiyoyi: A hankali cire haɗin duk masu haɗin (JS1-JS8, JO, da sauransu).

3. Sake Bangaren Gaba: Sake sukukulan da aka kama a gaban panel.

4. Cire Hukumar: Cire allon TCRA a hankali.

4. Shawarwari na Kulawa

• Dubawa lokaci-lokaci: Duba akai-akai cewa relays suna zaune amintacce a cikin kwasfa kuma cewa lambobin sadarwa suna aiki yadda yakamata.

• Tsare-tsare na Anti-Static: Koyaushe sanya madauri na ƙasa yayin sarrafa alluna. Ajiye allunan a cikin jakunkuna na anti-a tsaye.

• Tsabtace Tuntuɓa: Idan an sami batutuwan tuntuɓar sadarwa, la'akari da maye gurbin relay (relays ɗin toshe ne kuma ana iya maye gurbinsu daban-daban).

• Gudanar da Sassan Kayan Aiki: Ana ba da shawarar a ajiye aƙalla allon TCRA iri ɗaya a kan rukunin yanar gizon a matsayin abin da zai rage lokacin raguwa.

VII. Aikace-aikace

Ana amfani da DS200TCRAG1A Relay Output Board a cikin yanayin masana'antu masu zuwa:

• Tsarin Kula da Turbine na Gas: Sarrafa bawul ɗin kashe mai, bawul ɗin kashewa, injin wuta, injin fara, da sauran kayan aiki.

• Tsarin Turbine Control Systems: Sarrafa bawul ɗin shigar da injin turbine, bawul ɗin cirewa, bawul ɗin magudanar ruwa, da sauransu.

• Tsare-tsaren Kariya na Generator: Sarrafa masu fasa janareta, masu fasa filin, na'urorin ƙararrawa, da sauransu.

• Gas Manifold Blow-Off Valve Control: A matsayi na hudu na core, sarrafa iskar gas da yawa busa-kashe bawuloli don LP shaft kariya kariya.

• Ƙararrawa da Tsarukan Nuni: Fitilar ƙararrawar filin tuƙi, buzzers, fitilun nuni, da sauransu.

• Tsare-tsaren Sarrafa Kayan Aiki: Sarrafa famfunan ciyar da tukunyar jirgi, magoya baya, fanfuna masu sanyaya ruwa, da sauran kayan taimako.

• Haɓaka Tsari da Ayyukan Gyara: Maye gurbin kayan fitarwa na relay a cikin tsofaffin tsarin tare da daidaitattun musaya da aminci mafi girma.