ABB CI830 3BSE013252R1 Module Sadarwar Sadarwar Filin Bus

CI830 Fieldbus Communication Interface (FCI) babban aiki ne, na yau da kullun, da fasaha na sadarwa ta hanyar ABB don tsarin S800 I/O. Yana aiki azaman gada mai mahimmanci tsakanin mai kula da babban matakin (ta hanyar PROFIBUS-DP filin bas) da madaidaitan S800 I/O modules (ta ModuleBus). CI830 ba wai kawai yana ba da damar musayar bayanai mai sauri da aminci ba amma har ma yana haɗa ikon sarrafa wutar lantarki, saka idanu na matsayi, da ayyukan gudanarwa na daidaitawa, yana mai da shi babban sashi don gina tsarin rarrabawa ta atomatik.

An tsara CI830 don yanayin masana'antu, yana nuna babban abin dogaro, ƙarfin hana tsangwama, da zaɓuɓɓukan daidaitawa. Yana goyan bayan daidaitattun ka'idar PROFIBUS-DP tare da saurin sadarwar da ke jere daga 9.6 kbit/s zuwa 12 Mbit/s, saduwa da ainihin lokacin da buƙatun ƙarar bayanai na yawancin aikace-aikacen sarrafa kansa na masana'antu. Bugu da ƙari, CI830 yana ba da ƙarfi mai ƙarfi da aminci don kansa da kuma haɗa nau'ikan I / O ta hanyar keɓantaccen ikon juyawa na ciki.

Wannan ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙayyadaddun ƙirar dogo na DIN don sauƙin haɗawa a cikin kabad ɗin sarrafawa. Fannin gabansa yana ba da alamomin matsayi mai hankali, saitunan saitin adireshi, da tashoshin sadarwa masu mahimmanci, sauƙaƙe shigarwa, ƙaddamarwa, da kiyayewa.

---

2. Tsarin Samfur da Bayyanar

Tsarin CI830 FCI yana da ƙaƙƙarfan tsari tare da faffadan gaban fili a fili, da farko ya ƙunshi sassa masu zuwa:

• Canjawa Adireshin: Maɓallai biyu na jujjuya goma da aka yi amfani da su don saita adireshin tashar (kewaye 01-79) a cikin hanyar sadarwar PROFIBUS-DP.

• Ma'anonin Matsayi (LEDs): Ana amfani da su don nuna kuskuren module, yanayin aiki, matsayin wutar lantarki, Matsayin sadarwar PROFIBUS, da matsayin sadarwar ModuleBus na gani.

• Tashoshin Sadarwa:

• Port PROFIBUS-DP: Mai haɗin mata 9-pin D-sub.

• Tashar Sabis: Mai haɗin mata 9-pin D-sub don haɓaka software da kulawa.

• Tashoshin Samar da Wutar Lantarki: Tashoshi don haɗa wutar lantarki na 24V DC da saka idanu akan samar da wutar lantarki.

• Haɗin ModuleBus: Don haɗa TB810/TB811 mai canza ModuleBus na gani ko ModuleBus na lantarki.

A ciki, tsarin tsarin ya ƙunshi allunan kewayawa huɗu:

1. Board Processor: Ya ƙunshi CPU, ƙwaƙwalwar ajiya, guntu yarjejeniya ta PROFIBUS-DP, ModuleBus, da da'irorin direba na LED.

2. Hukumar Samar da Wutar Lantarki: Ya ƙunshi keɓantaccen mai sauya DC/DC wanda ke ba da ikon +5V don module da I/O modules, kuma yana haɗa direbobin RS-232 da ke ware don tashar sabis.

3. Kwamitin Kashewa: Yana aiki azaman babban cibiya don haɗin kai na waje, samar da tashoshi na wutar lantarki, masu haɗin tashar jiragen ruwa, kuma an kafa shi zuwa layin dogo na DIN ta hanyar haɗin ruwa mai ƙarfe.

4. Port Optical: Don haɗa ModuleBus na gani.

   
   

---

3. Key Features da Ayyuka

• PROFIBUS-DP Slave Interface: Cikakkar yarda da ma'aunin PROFIBUS-DP, yana ba da damar musayar bayanai mai sauri tare da tsarin sarrafawa.

• S800 ModuleBus Jagorar Jagora: Sarrafa da sarrafa duk abubuwan haɗin S800 I/O da aka haɗa, yana sauƙaƙe sayan bayanai da rarrabawa.

• Gudanar da Wutar Lantarki na Hankali: Yana da ginanniyar keɓantaccen wutar lantarki wanda ke ba da ƙarfi +5V da +24V zuwa na gaba I/O modules, tare da gajeriyar kariyar.

• Sa ido kan Samar da Wutar Lantarki: Yana ba da abubuwan sa ido kan samar da wutar lantarki masu zaman kansu guda biyu (SA, SB), suna goyan bayan daidaitawar wutar lantarki don haɓaka samuwar tsarin.

• Cikakken Binciken Matsayi: Nuni na ainihi na aikin module, sadarwa, iko, da matsayi na kuskure ta hanyar masu nunin LED masu launuka masu yawa akan gaban panel.

• Ƙimar Kanfigareshan Mai Sauƙi: Yana goyan bayan haɗe-haɗe daban-daban na S800 I/O modules, tare da cikakkun ƙa'idodin daidaitawa da ke tabbatar da aikin tsarin.

• Madaidaicin Kulawa da Haɓakawa: Ana iya haɓaka haɓakawa na firmware da gano kuskure ta hanyar keɓewar tashar sabis ta RS-232.

• Ƙarfafa Ƙarfafawar Masana'antu: Ya dace da ƙimar kariyar IP20, yana aiki akan kewayon zafin jiki mai faɗi, kuma yana amfani da hawan dogo na DIN.

  
  

---

4. Interfaces da Connections

4.1 Haɗin Kayan Wutar Lantarki (X1)

4.2 Haɗin PROFIBUS-DP (X2)

4.3 Haɗin Tashar Sabis (X3)

---

5. Dokokin Kanfigareshan da Iyakoki

Daidaiton CI830 dole ne ya bi iyakoki na ka'idar PROFIBUS-DP da ikon na'urar don tabbatar da ingantaccen tsarin aiki.

Iyakance-Matakin Tsari:

• Matsakaicin adadin Tashoshi a kowace Motar PROFIBUS: 79

• Matsakaicin Yawan Tashoshi a kowane Bangaren Bus na PROFIBUS: 32

• Matsakaicin adadin I/O Modules a kowane Tasha (CI830): 24

• Matsakaicin adadin I/O Modules a kowane Tari: 12 (An hana shigar da fiye da 12 MTUs da/ko S800L a cikin gungu ɗaya ba a yarda ba)

Iyakance Nau'in Module (dangane da CI830):

Saboda PROFIBUS-DP data iyakan fitar da bayanai, ba duk kayayyaki iya isa ka'idar matsakaicin 24. Matsakaicin adadin connectable modules ga manyan iri ne kamar haka:

Hanyar Tabbatar da Kanfigareshan:

Don tabbatar da takamaiman haɗe-haɗe na analog da na dijital, dole ne a yi amfani da Teburin Lissafi na Kanfigareshan (dangane da Tebu 11 a cikin takaddar) don tabbatarwa. Babban matakan sune kamar haka:

1. Cika Module Quantities: Shigar da adadin da aka tsara don kowane nau'in module a cikin tebur.

2. Ƙididdige Ƙididdigar Rukuni Uku: Ƙididdigar 'Sum User Parameters', 'Sum Input Bytes', da 'Sum Output Bytes' daban.

3. Ƙididdigar Ƙirar Iyakoki guda uku:

• ParamSize = Jimlar Ma'aunin Mai Amfani

• InSize = Jimillar Input Bytes

• OutSize = Jimillar Fitar Bytes

4. Duba Iyakokin Matakin Farko:

• Girman Param ≤ 237

• Girman ≤ 244

• OutSize ≤ 244
  Idan kowace ƙima ta wuce iyaka, saitin ba shi da inganci.

5. Zagaye Ƙimar Ƙimar: Tara InSize , OutSize , da (ParamSize + 15) zuwa mafi kusa na takwas (misali, zagaye 233 zuwa 240).

6. Ƙirƙiri Amfanin Ƙwaƙwalwar Ƙwaƙwalwa: Yi amfani da dabarar MemSize = a + 2*RoundParamSize + 3*(RoundInSize + RoundOutSize).

• a = 656 (Sigar Firmware 1.0, 1.1)

• a = 728 (Sigar Firmware 1.2 ko daga baya)

7. Bincika Ƙimar Ƙarshe: MemSize dole ne ya zama ≤ 2048. In ba haka ba, daidaitawar ba ta da inganci.

---

6. Alamar Matsayi da Bincike

Alamar LED akan CI830 gaban panel suna ba da cikakkiyar matsayi da bayanan bincike don saurin matsala.

---

7. Haɓaka Software da Kulawa

Bukatun Hardware:

• PC yana gudana Windows NT 4.0 ko 2000.

• Kebul na haɗi TK527 (3BSC950004R1) tsakanin CI830 da PC.

Tsarin haɓakawa:

1. Haɗi: Haɗa tashar PC ta COM1/COM2 zuwa tashar sabis na CI830 (X3) ta amfani da kebul na TK527.

2. Gudanar da Shirin haɓakawa: Yi loader32.exe akan PC.

3. Saitunan Siga: Zaɓi 'Masu bayanin mai amfani' kuma da hannu saka tashar tashar COM da hanyar zuwa fayil ɗin haɓakawa.

4. Saitunan Mahimmanci: Dole ne a duba akwatin 'Karfafa inganta saurin gudu (Gyara zuwa 9600 BD)' akwati kuma cire alamar wasu akwatuna.

5. Zazzagewa: Danna maɓallin 'Download' don fara haɓakawa. Tsarin yana ɗaukar kusan mintuna 5.

Shirya matsala:

• Matsala: Cire haɗin kebul ko katsewar wuta yayin haɓakawa.

• Magani: Kashe wutar CI830 sannan kuma ON sake kunna tsarin, sannan maimaita hanyar haɓakawa.

---