Bayanan Bayani na GE IS200ISBBG1A ISBus Board

IS200ISBBG1A ISBs Ketare Board ne wanda General Electric (GE) ya tsara don tsarin sarrafa shi. Wannan allon shine daidaitaccen sigar cikin jerin ISBB, da farko ana amfani dashi don haɗi tsakanin cikakken tushen ISBs (ko dai BAIA ko tsarin ACL) da ISBs. Yana ba da damar ketare kumburin ISBs lokacin da aka katse wutar lantarki zuwa kumburi ko kuma an buɗe haɗin haɗin kai a cikin cikakken keɓaɓɓen ke dubawa.

Hukumar IS200ISBBG1A tana taka muhimmiyar rawa wajen kariyar ketare don sadarwar ISBs tsakanin tsarin sarrafa GE. Ta hanyar relay na kewayawa, yana samun saurin sigina mai sassauƙa: lokacin da allon ke aiki akai-akai kuma an rufe interlock, yana haɗa siginar watsawa daga cikakken shigarwar duplex (P1) zuwa fitarwar watsawa (P2), kuma a lokaci guda yana haɗa siginar daga shigarwar karɓa (P3) zuwa cikakkiyar fitarwar duplex (P1). Lokacin da aka cire ƙarfin allo, ta atomatik tana ƙetare siginar daga shigar da karɓa (P3) kai tsaye zuwa fitarwar watsawa (P2), aiwatar da aikin kewayar kumburin kumburi da tabbatar da sadarwa mara yankewa akan ISBs.

Mabuɗin fasali na IS200ISBBG1A sun haɗa da:

• Ayyukan Kewaya Node: Yana ƙetare kumburi ta atomatik lokacin da aka rasa wuta ko kuma an buɗe maƙullin, yana tabbatar da sadarwar ISBs mara yankewa.

• Warewa Wutar Lantarki: Keɓewar sigina sama da 1 MΩ @ 500 V rms yana tabbatar da amincin tsarin.

• Alamar Matsayi: 2 Manufofin LED suna ba da matsayi na gani don watsa bayanai da ikon kewayawa.

• Zaɓuɓɓukan Ƙarfin Maɗaukaki: Ana iya ba da wutar lantarki 24V dc ta P1 ko TB2.

• Ƙaddamar da Ƙaddamarwa: Jumper JP1 yana ba da damar zaɓin ko za a ketare siginar kullewar waje.

• Siginar Siginar Ƙarfafawa: Ana katse sigina ne kawai kuma ana karkatar da su ta hanyar relay; babu da'irori mai aiki.

• Ƙirƙirar ƙira: Karamin marufi da aka samu ta hanyar masu haɗawa da toshe tasha.

Allon yana da masu haɗa filogi guda uku (P1, P2, P3), toshe tasha ɗaya (TB2), da jumper guda ɗaya (JP1). Jirgin yana da tsari mai sauƙi da abin dogara wanda ya dace da yanayin sarrafa masana'antu.

---

II. Babban Ayyuka

Babban ayyuka na IS200ISBBG1A sun haɗa da, amma ba'a iyakance su ba, masu zuwa:

1. Kariyar Ketare Node

Babban aikin hukumar IS200ISBBG1A shine samar da kariya ta hanyar wucewa ta hanyar isar da sako. Idan 24 V dc ba a kawo shi ga hukumar ISBB ba, hukumar za ta shiga yanayin wucewa ta atomatik:

• Haɗin watsawa tsakanin P1 da P2 ya katse (karye).

• Haɗin karɓa tsakanin P3 da P1 ya katse (karye).

• Ana haɗa shigar da shigar da karɓa daga P3 kai tsaye zuwa fitarwar watsawa akan P2: RECV DATA IN+ tana haɗa zuwa XMIT DATA OUT +, kuma RECV DATA IN- tana haɗi zuwa XMIT DATA OUT-.

Wannan ƙira yana tabbatar da cewa ko da kumburi ya rasa ƙarfi, hanyar sadarwar ISBs ta kasance ba ta katsewa, tana haɓaka amincin tsarin.

2. Tsarin Sigina na Al'ada

Lokacin da allon yana aiki akai-akai (24V dc yana samuwa) kuma haɗin haɗin kan P1 yana rufe, ana samun kuzari ta hanyar wucewa, yana samar da hanyar siginar mai zuwa:

• Ana haɗa shigarwar shigarwa daga P1 (XMIT DATA IN +/-) zuwa fitarwar watsawa akan P2 (XMIT DATA OUT +/-).

• Karɓi shigarwa daga P3 (RECV DATA IN +/-) an haɗa shi zuwa abin da aka karɓa akan P1 (RECV DATA OUT +/-).

3. Ketare Halayen Relay

Relay na kewayawa yana da halaye masu zuwa:

• Ƙarfin wutar lantarki: > 14.5V

• Dropout Voltage (Brown-out Condition): 11.0 ± 1.0 V dc (when the 24 V input slowly decreases to zero).

• Dropout Voltage (Normal Operation): < 10 V (when the relay interlock input voltage slowly decreases to zero while the voltage at P1-7,8 remains at 24 V dc).

• Ƙimar Input Input: Sunan 24V dc, matsakaicin 30V dc.

• Tuntuɓi Ƙididdiga na Yanzu: > 200 mA @ 10 V rms.

• Warewa: Aƙalla 40 dB a 1 MHz.

• Matsakaicin Ƙarfin Aiki: <1 W (na relays ɗaya ko da yawa).

4. Zaɓuɓɓukan Wuta

Kwamitin zai iya karɓar wutar lantarki 24V dc ta hanyoyi biyu:

• P1 Connector: Via fil 7 (tabbatacce) da 8 (dawowa).

• TB2 Terminal Block: Ta hanyar fil 1 (tabbatacce) da 2 (mara kyau), aiki azaman madogara ko tushen wutar lantarki na waje.

Babu wani gefen wutar lantarki da aka yi nuni zuwa ga wani irin ƙarfin lantarki ko dawowa akan allo.

5. Ware Sigina

Warewar siginar shigarwa ya fi 1 MΩ a 500 V rms na sakan 1, yana tabbatar da keɓewar lantarki da amincin tsarin.

6. Alamar Matsayin LED

Ƙungiyar tana da alamun LED guda biyu:

• LED Input Data: Yana nuna kasancewar shigar da bayanai.

• Kewaya Relay Power LED: Yana nuna isar da wutar lantarki ta hanyar wucewa.

7. Ƙaddamar da Ƙaddamarwa

Jumper JP1 yana zaɓar yanayin aiki tare:

• Matsayi na 1-2 (Tsoffin): Dole ne hukumar ta kasance a rufe madaidaicin madaidaicin don ba da kuzari (s).

• Matsayi 2-3: Shorts fitar da interlock. Har ila yau dole ne a yi amfani da wutar lantarki ga hukumar ta hanyar P1-7,8 ko TB2-1,2 don ƙarfafa relay(s).

  
  

---

III. Aikace-aikacen Tsarin

1. Aikace-aikace a cikin ISBs Sadarwa Systems

IS200ISBBG1A babban allo ne don kariya ta hanyar sadarwa ta ISBs tsakanin tsarin sarrafa GE. Ayyukansa a cikin tsarin sun haɗa da:

• Kewaya Node: Yana ƙetare kumburi ta atomatik akan asarar wutar lantarki ko buɗewa tare, yana tabbatar da sadarwar bas mara yankewa.

• Sadar da Sadarwa: A yanayin al'ada, yana watsa sigina daga cikakken tushen duplex zuwa ISBs kuma yana dawo da sigina daga ISBs zuwa cikakken tushen duplex.

2. Haɗin kai tare da BAIA da ACL

Ana iya haɗa IS200ISBBG1A tsakanin ISBs cikakken tushen duplex (BAIA ko ACL module) da ISBs. Ta hanyar ikonsa mai sassauƙa da zaɓuɓɓukan kulle-kulle, zai iya daidaitawa da buƙatun daidaita tsarin tsarin daban-daban.

3. Yanayin Aikace-aikace na al'ada

• Tsarukan Sarrafa Babban Dogaro: A cikin aikace-aikacen da ke buƙatar samun babban aiki, aikin kewayen kumburi yana hana maki guda na gazawa daga haifar da katsewar sadarwa.

• Cibiyoyin Sadarwar Sadarwa: Yana ba da kariya ta hanyar kumburi a cikin cibiyoyi na ISBs.

• Tsare-tsare na I/O mai nisa: Ana amfani da su a cikin kuɗaɗen I/O mai nisa don tabbatar da gazawar kumburi guda ɗaya baya shafar duk hanyar sadarwar sadarwa.

• Gudanar da Tsarin Masana'antu: Yana tabbatar da amincin sadarwa a cikin tsarin sarrafawa da aka rarraba.

  
  

---

IV. Cikakken Bayanin Interface

1. P1 Cikakken Haɗin Duplex

P1 shine mai haɗin nau'in RJ45 mai 8-pin don haɗa cikakken tushen duplex (BAIA ko ACL). Ayyukan fil sune kamar haka:

2. P2 Mai Haɗin Bayanai

P2 shine mai haɗin nau'in RJ45 mai 8-pin don haɗawa zuwa layin watsa ISBs. Ana amfani da fil 3 da 6 kawai:

3. P3 Karɓi Mai Haɗin Bayanai

P3 shine mai haɗa nau'in RJ45 mai 8-pin don haɗawa zuwa layin karɓar ISBs. Ana amfani da fil 3 da 6 kawai:

4. TB2 Auxiliary Interlock Power Terminal Block

TB2 shine toshe tashar tashar 2-pin don haɗa tushen wutar lantarki / na waje:

na Pin	Nomenclature	Bayanin
1	AUX INTERLOCK 24VDC	24V dc daga tushen wutan lantarki ko na waje
2	AUX INTERLOCK 24VDC RTN	24V dc dawo

---

V. LED Manuniya da Jumper Kanfigareshan

1. LED Manuniya

Kwamitin yana da alamun LED guda biyu waɗanda ke ba da bayanin matsayi:

2. Jumper JP1

Matsayin Kanfigareshan	Bayanin
1-2	Matsayi na asali; dole ne a rufe ma'aunin ma'aunin ma'aunin don ba da kuzari
2-3	Shorts fitar da interlock; Dole ne a ba da wutar lantarki ga hukumar ta hanyar P1-7,8 ko TB2-1,2 don ƙarfafa relay(s)

---

VI. Shigarwa da Kulawa

1. Wuri Mai hawa

IS200ISBBG1A allon yawanci ana hawa a cikin majalisar sarrafawa kuma yana haɗi zuwa tsarin ta hanyar haɗi. Ana iya saka shi a kan dogo na DIN ko daidaita shi kai tsaye zuwa panel.

2. Matakan Shigarwa

1. Haɗa P1: Haɗa cikakken tushen duplex (BAIA ko ACL) zuwa mai haɗin P1.

2. Haɗa P2 da P3: Haɗa watsawar ISBs kuma karɓi layi zuwa masu haɗin P2 da P3, bi da bi.

3. Haɗa Wuta: Zaɓi ko dai P1-7,8 ko TB2 don samar da wutar lantarki kamar yadda ake buƙata.

4. Sanya Jumper: Saita JP1 bisa ga buƙatun tsarin.

5. Duba LEDs: Bayan an kunna wutar lantarki, tabbatar da cewa LEDs suna nuna matsayi na al'ada.

3. Shawarwari na Kulawa

• Dubawa lokaci-lokaci: Bincika masu haɗin don amintaccen haɗi da wayoyi don sassauƙa.

• Tsaftacewa: Tsaftace allo akai-akai don hana tara ƙura.

• Kariyar ESD: Sanya madauri na ƙasa lokacin sarrafa allon kuma adana shi a cikin jakunkuna masu tsayayya.

• Sarrafa Sashin Kayan Aiki: Riƙe allon ISBBG1A don rage raguwar lokacin rashin nasara.