GE IS200HFPAG1A Babban Mitar AC/Fan Power Supply Board

IS200HFPAG1A Babban Mitar AC/Fan Power Supply Board ne wanda General Electric (GE) ya tsara don Innovation Series™ Drive Systems. Wannan kwamiti shine nau'in G1 a cikin jerin HFPA, da farko ana amfani da shi don canza babban ƙarfin wutar lantarki ko DC ko shigar da AC zuwa abubuwan da ke cikin ƙananan ƙarancin wutar lantarki na AC / DC, yana ba da ƙarfi da aminci ga magoya baya, da'irori masu sarrafawa, da sauran kayan taimako a cikin tsarin tuƙi.

Hukumar IS200HFPAG1A tana amfani da ci-gaba mai sarrafa kuɗaɗe da sarrafa wutar lantarki mai sarrafa kansa. Yana iya juyar da shigarwar DC mai ƙarfi na 230-1000 V dc ko shigar da AC na 230V ac zuwa abubuwan da ake buƙata na ƙananan ƙarfin lantarki. Jigon allo shine mai sarrafa buck mai iyaka na yanzu da ƙarfin lantarki wanda ke yanke wutar haɗin gwiwar DC zuwa matsakaicin matsakaici mara keɓe na kusan 118 V dc. Wannan matsakaicin ƙarfin lantarki ana ciyar da shi zuwa inverter mai sarrafa kansa da taswira don samar da ƙarfin fitarwa na ƙarshe.

Mabuɗin fasali na IS200HFPAG1A sun haɗa da:

• Yanayin Shigar Dual: Yana goyan bayan shigarwar 230V ac AC ko shigarwar 230-1000 V dc DC, dacewa da yanayin wutar lantarki daban-daban.

• Fitarwa da yawa: Yana ba da 48 V ac (25 kHz square wave), 17.7 V ac (25 kHz square wave), da 48 V dc (ƙarfin fan mara tsari).

• Ƙarfin fitarwa: Matsakaicin jimlar kayan fitarwa na 90 VA.

• Cikakken Kariya: Ana ba da fuses akan abubuwan da aka shigar da su duka biyu, tabbatar da kayan aiki da amincin ma'aikata.

• Alamar Matsayi: Masu nunin LED guda biyu (17V OK da 48V Ok) suna lura da matsayin manyan abubuwan fitarwa.

• Zane na Modular: Yana fitar da ƙarfin lantarki daban-daban ta hanyar haɗin filogi takwas, yana sauƙaƙe tsarin haɗin kai.

Yawanci ana ɗora allon a cikin ma'ajin sarrafa tsarin tuƙi, kusa da faifan allo ko kewayen fanka, kuma ana kiyaye shi a cikin jigilar robobi. Jirgin yana amfani da fasaha na dutsen sama, yana aiki a cikin yanayin masana'antu, kuma ya dace da madaidaitan mitar AC daban-daban da tsarin jujjuya wutar lantarki.

---

II. Babban Ayyuka

Babban ayyuka na IS200HFPAG1A sun haɗa da, amma ba'a iyakance su ba, masu zuwa:

1. Canjin Input na Babban Wuta na DC

Hukumar tana karɓar shigarwar DC mai ƙarfi na 230-1000 V dc. Mai sarrafa wutar lantarki mai iyaka na yanzu da ƙarfin lantarki yana canza ƙarfin shigarwar zuwa matsakaicin matsakaici mara ware na kusan 118 V dc. Ƙarfin wutar lantarki don mai sarrafawa ana farawa ta hanyar ƙaramar hanya mai juriya sannan kuma ta ci gaba ta hanyar sikeli da ingantaccen ƙarfin wutar lantarki da aka haɓaka a cikin iska mai son zuciya haɗe da jerin inductor na mai gudanarwa. Hakanan ana amfani da wannan wutar lantarki mai jujjuyawar son zuciya azaman martani don daidaita matakin 118 V.

2. Canjin Shigar AC

Hakanan hukumar zata iya karɓar 230V ac, shigarwar AC 50-60 Hz. Ana gyara wannan shigarwar a ciki kuma ana tacewa kafin a ciyar da ita cikin mai sarrafa kuɗin kuɗi, kuma tana samar da matsakaicin ƙarfin lantarki. Ana kiyaye da'irar shigarwa ta FU2 (250 V, 1.0 A).

3. Yawan Fitowa Generation

Matsakaicin wutar lantarki na 118 V dc ana ciyar da shi zuwa cikin inverter mai samar da wutar lantarki mai sarrafa kansa, yana mai da shi zuwa madaidaicin igiyar AC wanda ke tafiyar da farkon na'urar wuta. Na biyu windings na Transformer yana samar da abubuwa masu zuwa:

• 48V ac Fitarwa: 25 kHz murabba'in kalaman, ± 5% daidaito, fitarwa ta hanyar HFPL1 da HFPL2 masu haɗawa, tare da ɗaya kasancewa fitarwa mai haɗaka (SQV48F).

• 17.7 V ac Fitarwa: 25 kHz murabba'in kalaman, ± 5% daidaito, fitarwa ta hanyar DPPL1 da DPPL2 haši, tare da ɗaya kasancewa fitarwa mai hade (SQV17F).

• 48 V dc fitarwa: Ƙarfin fan da ba a kayyade ba, fitarwa ta hanyar FAPL1 da FAPL2 masu haɗawa, yana ƙarfafa masu sanyaya na tsarin tuƙi.

4. Siginar Maganar Fan

Hakanan hukumar tana ba da siginar magana ta fan (FREF) da gama gari (COM48) ta hanyar haɗin FRPL da FRPL1, waɗanda ake amfani da su don sarrafawa ko saka idanu akan aikin fan.

5. Ƙayyadaddun Ƙididdiga na Yanzu

Fitowar halin yanzu yana iyakance ta hanyar fusing da ƙuntata mai sarrafa buck canza halin yanzu zuwa matsakaicin 1.5 amps, tabbatar da cewa allon bai lalace ba ƙarƙashin nauyi ko gajeriyar yanayi.

6. Alamar Matsayin LED

Alamun koren LED guda biyu suna lura da manyan abubuwan fitarwa:

• DS1 (17 V OK): Haske lokacin da fitarwar 17.7 V ac yayi kyau; idan a kashe, duba FU4.

• DS2 (48 V Yayi): Haske lokacin da abubuwan 48 V ac da dc suka yi kyau; idan a kashe, duba FU1.

7. Fuse Kariya

Hukumar tana da fuses guda huɗu waɗanda ke kare da'irori daban-daban:

• FU1: Yana kare fitarwar wutar lantarki 48V ac/dc (G1: 48 V, 250 V, 2.5 A).

• FU2: Yana Kare shigar da wutar lantarki 230V ac (250V, 1.0 A).

• FU3: Yana kare shigar da wutar lantarki 230-1000 V dc (600V, 2.0 A).

• FU4: Yana Kare 17.7V ac mai samar da wutar lantarki (G1: 250 V, 4.0 A).

  
  

---

III. Aikace-aikacen Tsarin

1. Aikace-aikace a cikin Innovation Series Drive Systems

IS200HFPAG1A shine mabuɗin samar da wutar lantarki don kayan taimako a cikin tsarin tuƙi na Innovation Series. Ayyukansa a cikin tsarin sun haɗa da:

• Samar da Wuta na Fan: Yana ba da wutar lantarki 48 V dc don masu sanyaya tsarin tuƙi, yana tabbatar da ɓarkewar zafi mai kyau don samfuran wutar lantarki.

• Samar da Wutar Wuta na Sarrafa: Yana ba da 48 V ac da 17.7 V ac babban raƙuman murabba'in mita don kewayawa da'irori, masu tuƙi, da sauran keɓantattun buƙatun wutar lantarki.

• Input Voltage Adabting: Yana karɓar ko dai babban ƙarfin wutar lantarki na DC ko shigarwar AC, daidaitawa da yanayin wutar lantarki daban-daban kamar wutar lantarki ta hanyar haɗin DC ko kayan wutar lantarki na AC.

2. Bambance-bambance daga G2 Version

Jerin HFPA yana da nau'ikan G1 da G2, tare da babban bambanci shine ƙimar ƙarfin lantarki na fitarwa:

Don haka, lokacin zabar allon HFPA, dole ne a zaɓi sigar da ta dace bisa ga matakan ƙarfin lantarki da tsarin ke buƙata. Sigar G1 ta dace da aikace-aikacen da ke buƙatar 48 V da 17.7 V.

3. Yanayin Aikace-aikace na al'ada

• Motoci Masu Sauƙaƙe AC: Yana ba da kayan wuta da yawa don magoya baya, allon sarrafawa, da masu tuƙi a cikin tuƙi.

• Tsarin Juya Wuta: Yana aiki azaman samar da wutar lantarki, zana wuta daga bas ɗin DC mai ƙarfi don samar da ƙananan ikon sarrafa wutar lantarki.

• Kayan Automation na Masana'antu: Yana ba da keɓantaccen iko don PLCs, firikwensin, da sauransu.

• Tsarin Makamashi Mai Sabuntawa: Yana ba da ikon tsarin taimako a cikin inverters na photovoltaic ko masu canza injin injin iska.

  
  

---

IV. Cikakken Bayanin Interface

1. Input Power Connectors (Stab-on Terminals)

2. 17.7 V ac Masu Haɗin Fitarwa DPPL1 da DPPL2

Waɗannan masu haɗin suna fitar da ƙarfin raƙuman murabba'in 17.7 V ac 25 kHz. Kowane mai haɗin haɗin yana ba da sigina biyu:

3. 48 V ac Masu Haɗin Fitarwa HFPL1 da HFPL2

Waɗannan masu haɗin suna fitar da ƙarfin raƙuman murabba'in 48 V ac 25 kHz:

4.48 V dc Fan Power Connectors FAPL1 da FAPL2

Waɗannan masu haɗin suna fitar da ikon fan 48 V dc da siginar ma'anar fan:

5. Masu Haɗin Rarraba Reference Fan FRPL da FRPL1

Waɗannan masu haɗin suna rarraba siginar tunani na fan da gama gari:

fil	siginar	Bayanin
1	COM48	48V dc da fan reference gama gari (G1)
2	FREF	Siginar Maganar Masoya

---

V. Manuniya da Fuses

1. LED Manuniya

2. Fuses

Fuse	Rating Kare	Maye Gurbin	Bayanan Bayanan
FU1	250V, 2.5 A	48V ac/dc ikon fitarwa	Dole ne a kashe wuta kafin musanyawa, tabbatar da cewa kaya ba shi da gajeriyar kewayawa
FU2	250V, 1.0 A	230V AC shigar da wutar lantarki	Dole ne a kashe wuta kafin musanyawa, duba ƙarfin shigarwar al'ada ne
FU3	600 V, 2.0 A	230-1000V dc shigar da wutar lantarki	Dole ne a kashe wutar lantarki kafin musanyawa, lura da babban ƙarfin wutan lantarki
FU4	250 V, 4.0 A	17.7V ac fitarwa fitarwa	Dole ne a kashe wuta kafin musanyawa, tabbatar da cewa kaya ba shi da gajeriyar kewayawa

---

VI. Shigarwa da Sauyawa

1. Wuri Mai hawa

Hukumar IS200HFPAG1A yawanci ana hawa a cikin ma'ajin sarrafa tsarin tuƙi, maiyuwa kusa da faifan allo ko a cikin magaryar fan, kuma an adana shi a cikin jigilar robobi. Yayin shigarwa, tabbatar da cewa allon yana da ƙarfi sosai kuma duk masu haɗawa an haɗa su cikin aminci.

2. Tsarin Sauyawa

Gargadin Tsaro:

• GARGAƊI: Don hana girgiza wutar lantarki, kashe wutar lantarki zuwa tsarin tuƙi kuma jira mintuna da yawa don duk masu ƙarfin wuta su fita. Yi amfani da kayan gwajin ƙarfin ƙarfin lantarki don tabbatar da cewa an cire kuzarin da'irori kafin taɓawa.

• HANKALI: Don hana lalacewar ɓangarori da ke haifar da tsayayyen wutar lantarki, bi da duk alluna tare da dabarun kulawa a tsaye. Saka madauri na ƙasa da kuma adana alluna a cikin jakunkuna marasa ƙarfi.

Matakan Maye gurbin:

1. Tabbatar da Kashe Wuta: Tabbatar cewa tsarin tuƙi ya daina samun kuzari gaba ɗaya kuma an fitar da capacitors.

2. Bude Ƙofar Majalisa: Buɗe kofa na majalisar tuƙi don samun damar allon HFPA.

3. Takaddun igiyoyi: Tabbatar cewa duk igiyoyin suna da lakabi daidai daidai da alamomin kan allo don sake haɗawa cikin sauƙi.

4. Cire haɗin igiyoyi:

• Don igiyoyin ribbon, riƙe kowane gefen haɗin kebul ɗin kuma ja shi a hankali.

• Don igiyoyi tare da shafuka masu ja, ja shafin a hankali.

5. Cire Tsohuwar allo: Cire sukurori biyu da ke riƙe da allon HFPA a cikin jigilar filastik kuma fitar da tsohuwar allo.

6. Shigar Sabon allo: Gabatar da sabon allo a wuri ɗaya kuma shigar da shi cikin mai ɗaukar hoto tare da sukurori biyu.

7. Sake haɗa igiyoyi: Sake haɗa duk igiyoyi kamar yadda aka lakafta su, tabbatar da sun zauna daidai.

8. Bincika Fuses: Tabbatar cewa duk fuuss huɗu suna nan kuma suna da kyau.

9. Mayar da Wuta: Rufe kofofin majalisar kuma mayar da wutar lantarki ga tsarin.