Bent Nevada 146055-05-02-05 Ceramic Capped Reverse Mount Probe

~!phoenix_var254_0!~ ~!phoenix_var254_1!~ ~!phoenix_var254_2!~ ~!phoenix_var254_3!~ ~!phoenix_var254_4!~ ~!phoenix_var254_5!~ ~!phoenix_var254_6!~ ~!phoenix_var254_7!~~!phoenix_var254_8!~ ~!phoenix_var254_9!~~!phoenix_var254_10!~ ~!phoenix_var254_11!~~!phoenix_var254_12!~ ~!phoenix_var254_13!~~!phoenix_var254_14!~

~!phoenix_var256_0!~ ~!phoenix_var256_1!~ ~!phoenix_var256_2!~

It is important to note that the 146055-05-02-05 shares the same fundamental limitation as the 146054 forward‑mount probes: it does not include a rear fitting or stainless steel tubing. Consequently, the rear of the probe – where the coaxial cable exits the case – is not sealed and must be protected from water, ammonia, ammonium hydroxide, hydrogen sulphide, or any corrosive environment. Dole ne a bi ta hanyar fita ta baya ta wuri mai tsabta, bushe, mara lahani. For applications requiring full front‑and‑rear sealing, the 146056 variant with rear tubing and NPT fittings is the recommended alternative, but that model is not available in reverse‑mount configuration.

The 146055-05-02-05 has a total cable length of 0.5 metre (1.6 feet) . This short length is typical for reverse‑mount applications where the Proximitor Sensor is located close to the probe, often within the same junction box or on the machine casing. Ana ba da binciken tare da madaidaicin madaidaicin coaxial ClickLoc connector (zaɓin 02) ba tare da mai haɗawa ba; duk da haka, ana iya ƙara masu kariyar haɗin kai azaman na'urorin shigar fili. The probe is not available with armour or with a connector protector pre‑installed, as noted in the datasheet. The -05 approval option signifies that the probe carries multiple international hazardous area certifications, making it suitable for installation in explosive atmospheres worldwide.

~!phoenix_var259_0!~ ~!phoenix_var259_1!~ ~!phoenix_var259_2!~

Siffofin Gina da Zane

The 146055-05-02-05 is mechanically distinct from its forward‑mount counterparts. The reverse‑mount configuration is optimised for installation in housings that have limited access from the front or where the probe must be secured from the rear. The probe case is machined from AISI 304 stainless steel and features a 3/8‑24 UNF 2A thread, but the thread position relative to the tip differs from forward‑mount probes. Wuraren maɓallan suna 7/16 ‑ inch (11.1 mm) a fadin, suna samar da mafi girman saman ƙasa don aikace-aikacen juzu'i yayin shigarwa. Tsawon shari'ar ba zaɓaɓɓen mai amfani ba ne; a maimakon haka, jimlar tsayin (daga tip zuwa mai haɗawa) an ƙaddara shi kawai ta zaɓin tsayin kebul, wanda ga wannan ƙirar shine mita 0.5.

The ceramic tip is identical in material and construction to other 3300 ceramic‑capped probes: high‑purity alumina, brazed to the stainless steel case to form a hermetic seal. The tip diameter is 7.0 mm (0.273 inch), and the threaded section diameter is 7.2 mm (0.285 inch). The probe is designed for use in 31000 or 21000 housings, as indicated in the datasheet, but can also be adapted to other housings with compatible thread and clearance requirements. Ba a samun na'urorin bincike na baya-bayan nan tare da sulke ko zaɓuɓɓukan kariyar mai haɗawa, wanda ke bayyana a cikin takardar bayanan. Therefore, the 146055-05-02-05 is supplied without these additional protections.

Kebul na haɗin coaxial yana da tsayin mita 0.5 kuma yana amfani da ƙirar 75 Ω impedance tare da rufin ethylene propylene (FEP). FEP yana ba da kyawawan kaddarorin dielectric, ƙarancin ɗanɗano, da juriya ga yanayin zafi da sinadarai. The cable is terminated with a miniature coaxial ClickLoc connector, which is gold‑plated to resist corrosion and ensure low contact resistance. The connector's positive locking mechanism audibly 'clicks' when finger‑tight, eliminating the need for tools and preventing accidental disconnection due to vibration. Mai haɗin haɗin daidaitaccen nau'in kafaffen goro ne (zaɓi 02), kuma ba a bayar da sigar goro mai cirewa don wannan ƙirar ba.

Saboda ba a rufe bayan binciken ba, tilas ne a kiyaye fitar da kebul daga mahalli. A baya-bayan shigarwa, kebul na yawanci yana fita ta bayan gidan kuma ana tura shi zuwa akwatin mahadar. Dole ne a kula don tabbatar da cewa duk wani danshi ko tururi mai lalata ba ya bibiyar kebul ɗin kuma ya shiga bayan binciken. The use of connector protectors (accessories) is strongly recommended for all installations to provide increased environmental protection, even though they are not pre‑installed.

~!phoenix_var266_0!~ ~!phoenix_var266_1!~ ~!phoenix_var266_2!~

• Bent Nevada 31000 da 21000 jerin gidaje masu ɗauke da gidaje, waɗanda aka kera musamman don ɗaukar bincike-bincike na baya. Ana amfani da waɗannan gidaje a cikin manyan injina, compressors, da famfo.

• Wuraren maƙallan turawa inda za a iya samun dama daga baya kawai, kuma ba za a iya shigar da bincike na dutsen gaba ba tare da kwance na'urar ba.

• Wurare masu iyaka a cikin rumbun injina inda shugaban mai hawa yake a ciki, yana buƙatar shigar da binciken daga gefen ciki.

• Sake sabunta kayan aikin gado waɗanda tun farko suka yi amfani da binciken baya-bayan nan, suna ba da damar musanya kai tsaye ba tare da canza mahalli ba.

• Aikace-aikace tare da iyakataccen zaɓin hanyar kebul, inda gajeriyar kebul na mita 0.5 ta isa isa ga Sensor Proximitor wanda aka ɗora a kusa.

• Muhalli inda kawai gaban binciken ke fallasa ga kafofin watsa labarai masu lalata, kuma za a iya ajiye ficewar kebul na baya a cikin tsaftataccen wuri mai bushewa.

A duk waɗannan lokuta, hular yumbu yana tabbatar da cewa fuskar da ake ji ta ci gaba da kasancewa cikin sinadarai, yayin da bakin karfe 304 ke ba da daidaiton tsari. Zaren 3/8-24 ya dace da ramukan hawa da yawa da ake da su, kuma juzu'i na ɗorewa yana sauƙaƙa shigarwa a takamaiman ƙirar gidaje.

Cikakken lambar samfurin 146055-05-02-05 an tsara shi kamar haka:

Lokacin yin oda, dole ne a yi amfani da cikakken kirtani 146055-05-02-05 don tabbatar da daidaitaccen haɗin tsayin kebul, salon haɗi, da fakitin takaddun shaida.

Correct installation of the 146055-05-02-05 is critical for reliable operation. Being a reverse‑mount probe, the installation procedure differs from forward‑mount probes. The probe is inserted from the inside of the housing or from the rear, with the threaded portion engaging a matching tapped hole. The 7/16‑inch wrench flats allow controlled torque application. Yana da mahimmanci don guje wa wuce gona da iri, kuma ana ba da shawarar amfani da goro (misali, kayan haɗi 04301007 don zaren 3/8-24) don hana sassautawa saboda girgiza.

Saitin tazarar yana bin hanyar lantarki iri ɗaya kamar sauran na'urori masu ɗaukar yumbu. Saboda an canza kewayon layi idan aka kwatanta da daidaitattun bincike na 3300 XL, saitin rata na inji ta amfani da ma'aunin jijjiga ba a ba da shawarar ba. Madadin haka, haɗa binciken zuwa Sensor Proximitor da wutar lantarki, kuma saka idanu da ƙarfin wutar lantarki na DC. Sanya binciken ta yadda maƙasudi ( saman shaft) ya faɗi cikin kewayon ƙarfin lantarki na madaidaiciyar -4 Vdc zuwa -16 Vdc. Mafi kyawun madaidaicin tsaka-tsakin rata shine kusan -10 Vdc, wanda ke ba da damar matsakaicin balaguron balaguro na biyu don auna girgiza. Dole ne mai sakawa ya tabbatar da cewa tulun yumbu ba zai taɓa tuntuɓar igiyar juyawa ba, saboda alumina yana da karye kuma zai tsinke ko karaya a kan tasiri. Such damage is not covered by the warranty.

The 0.5‑metre cable must be routed with a bending radius of at least 25.4 mm (1.0 inch) at every point. Sharp bends can deform the coaxial dielectric, altering capacitance and causing measurement errors. Saboda kebul ɗin gajeru ne, da alama za a saka Sensor Proximitor kusa da binciken, wanda ke sauƙaƙa sarrafa hanya amma har yanzu yana buƙatar kulawa.

The rear of the probe is not sealed; saboda haka, tilas ne a ajiye fitar da kebul a wuri mai tsabta, bushe, mara lalacewa. A baya-bayan shigarwa, kebul na yawanci yana fita ta bayan gidan kuma yana iya wucewa ta hanyar magudanar ruwa ko igiyar igiya. Ensure that any openings are sealed to prevent moisture or corrosive vapours from entering and tracking along the cable. Ana ba da shawarar yin amfani da masu kariyar haɗin (na'urorin haɗi) da ƙarfi don kare haɗin haɗin haɗin daga gurɓataccen muhalli.

~!phoenix_var294_0!~ ~!phoenix_var294_1!~~!phoenix_var294_2!~

~!phoenix_var297_0!~ ~!phoenix_var297_1!~ ~!phoenix_var297_2!~

• ~!phoenix_var298_0!~ ~!phoenix_var298_1!~

• ~!phoenix_var299_0!~ ~!phoenix_var299_1!~

• IECEx: Ex ia IIC T5…T1 Ga; Ex nA/ec IIC T5…T1 Gc.

• ~!phoenix_var316_0!~ ~!phoenix_var316_1!~ ~!phoenix_var316_2!~

• ~!phoenix_var317_0!~ ~!phoenix_var317_1!~ ~!phoenix_var317_2!~

~!phoenix_var356_0!~ ~!phoenix_var356_1!~ ~!phoenix_var356_2!~

~!phoenix_var358_0!~ ~!phoenix_var358_1!~ ~!phoenix_var358_2!~

~!phoenix_var359_0!~ ~!phoenix_var359_1!~~!phoenix_var359_2!~

Reverse‑mount probes (like the 146055) are not available with armour or connector protector options – this is explicitly stated in the datasheet. If additional mechanical protection is required, consider using a forward‑mount probe with armour or adding external cable protection separately. Also, the 146055-05-02-05 has a 0.5‑metre cable; tabbatar da cewa Proximitor Sensor yana cikin wannan ɗan gajeren nisa, saboda ana iya buƙatar kebul na tsawo idan firikwensin ya fi nisa. However, note that 0.5‑metre probes are designed for use with matching 0.5‑metre Proximitor Sensors – mixing cable lengths may affect system accuracy.

~!phoenix_var367_0!~ ~!phoenix_var367_1!~ ~!phoenix_var367_2!~

~!phoenix_var379_0!~ ~!phoenix_var379_1!~ ~!phoenix_var379_2!~

Kwatanta da Samfura masu alaƙa

~!phoenix_var381_0!~ ~!phoenix_var381_1!~ ~!phoenix_var381_2!~

• ~!phoenix_var382_0!~ ~!phoenix_var382_1!~

• ~!phoenix_var383_0!~ ~!phoenix_var383_1!~

• ~!phoenix_var384_0!~ ~!phoenix_var384_1!~

• ~!phoenix_var385_0!~ ~!phoenix_var385_1!~ ~!phoenix_var385_2!~ ~!phoenix_var385_3!~

• Gidajen da suka dace: An tsara 146055 musamman don gidaje 31000 da 21000; 146054 bincike ne na gaba ɗaya-manufa.