GE DS200DTBCG1A Module Ƙarshen Fitar da Tuntuɓi

DS200DTBCG1A (Tsarin Ƙarshen Fitar da Tuntuɓar Sadarwa) muhimmin abu ne a cikin Tsarin Kula da Turbine na General Electric (GE) SPEEDTRONIC Mark V LM, wanda aka kasafta azaman Hukumar Tashar Waya ta Buga (TB). Ana amfani da wannan tsarin da farko a cikin madaidaicin Input/Output (I/O), wanda ke aiki a matsayin tashar ƙarewa da rarrabawa don siginar fitarwa na lamba. Tsarin DS200DTBCG1A yana taka muhimmiyar rawa a cikin tsarin sarrafa injin turbine, yana mai da umarni dabaru na mai sarrafawa zuwa ayyuka na zahiri. Ta hanyar tuƙi ko solenoids, yana sarrafa nau'ikan masu kunna wuta daban-daban don injin turbin gas da mataimakansa, kamar bawuloli, famfo, fanfo, da tsarin kunna wuta.

A cikin gine-ginen tsarin sarrafa Mark V LM, Digital I/O cores (misali, , , ) rike babban ƙarar sigina masu hankali. An shigar da tsarin DS200DTBCG1A a cikin waɗannan nau'ikan, yana aiki tare da haɗin gwiwa tare da Digital I / O Board (TCDA) da kuma Relay Output Boards (TCRA) don kammala wayoyi na ƙarshe, rarraba wutar lantarki, da nau'in fitarwa don tashoshin fitarwa. Zanensa ya ƙunshi ƙa'idodin masana'antu na babban abin dogaro, daidaitawa mai sassauƙa, da sauƙin kulawa, ƙirƙirar tushe mai mahimmanci na kayan aiki don tabbatar da aminci, kwanciyar hankali, da ingantaccen aiki na injin turbin gas.

2. Samfurin Samfurin & Matsayi

• Saukewa: DS200DTBCG1A

• Cikakken Suna: Module Ƙarshen Fitar da Tuntuɓi

• Tsarin Iyaye: SPEEDTRONIC Mark V LM Tsarin Kula da Turbine

• Aiki na Farko: Haɗin ƙarshen don siginar fitarwa na lamba, rarraba wutar lantarki, da daidaitawar kayan aiki na nau'in fitarwa (bushe lamba / mai ƙarfi [solenoid] lamba).

• Wurin Shigarwa: A cikin Dijital I/O , , Mai sarrafa Mark V LM.

3. Matsayi & Gudun Siginar a cikin Tsarin Gudanarwa

Tsarin DS200DTBCG1A yana zaune a matakin ƙaddamarwa na ƙarshe na kwararar siginar sarrafa Mark V LM:

1. Sarrafa Umarnin Sarrafa: Tsarin Tsarin Sarrafa (CSP) a cikin Injin Sarrafa yana haifar da siginonin sarrafa dabaru dangane da matsayin turbine da umarnin mai aiki.

2. Isar da siginar: Ana aika siginonin dabaru zuwa injunan I/O masu dacewa (misali, , ) ta hanyar sadarwar COREBUS.

3. Gudanar da I/O: Injin I/O yana isar da sigina zuwa allon TCDA a cikin Dijital core ta hanyar hanyar sadarwa ta IONET.

4. Tuki Mai Sauƙi: Hukumar TCDA tana canza siginar dabaru zuwa umarnin tuƙi, aika ta hanyar haɗin JO zuwa hukumar TCRA, ƙarfafawa ko kawar da takamaiman relays.

5. Ƙirar Ƙarshe: Canjin jihar na lambobin relay a kan hukumar TCRA ana watsa shi zuwa tsarin DS200DTBC ta hanyar haɗin JS1-JS8.

6. Fitar Wuta & Haɗin Filin:

• Idan an saita tashar azaman 'bushe lamba' akan DTBC, lambobin sadarwa suna haɗa kai tsaye zuwa tubalan tashar tashar. Ƙarfin sarrafawa da aka samar da mai amfani yana haɗi zuwa gaɓar na'urar filin ta waɗannan tashoshi.

• Idan an saita shi azaman fitarwar solenoid ' module ɗin DTBC yana tafiyar da wutar lantarki 125 V DC na ciki (daga J8, da dai sauransu) ta hanyar rufaffiyar lambobin sadarwa kai tsaye zuwa toshe madaidaicin tasha, yana kunna solenoid da aka haɗa.

7. Kunna Na'urar Filin: A ƙarshe, ƙarfin lantarki yana motsa mai kunna filin (misali, bawul ɗin mai, bawul ɗin kewaye, famfo) don kammala manufar sarrafawa.

4. Shigarwa, Kanfigareshan & Waya Guidelines

4.1 Bayanan shigarwa

• An shigar da DS200DTBCG1A, a matsayin tashar tasha, a cikin wani ramin da aka keɓe a cikin Dijital I/O core (yawanci a gaba ko gefen ainihin).

• Tabbatar cewa duk ikon mai sarrafawa ya KASHE kafin shigarwa kuma kula da matakan kariya.

• A lokacin shigarwa, tabbatar da masu haɗawa (jerin JS, J8, da dai sauransu) suna da ƙarfi tare da allunan da suka dace (TCRA, igiyoyin wutar lantarki), suna mai da hankali ga daidaitawar kebul (yawanci suna daidaitawa ta hanyar launi ko alamar Pin1).

4.2 Kanfigareshan Jumper Hardware

Wannan muhimmin mataki ne na amfani da DS200DTBCG1A, yana ƙayyade yanayin tashar fitarwa kai tsaye.

1. Jumper Identification: Don daidaitaccen tsarin fitarwa na solenoid, masu tsalle suna fitowa cikin nau'i-nau'i, masu lakabi Px da Mx (inda x=1 zuwa 18, daidai da tashoshin fitarwa 1 zuwa 18).

2. Hanyar Tsara:

• Kunna Fitar Solenoid (Lambobin Sadarwa): Saka duka madafunan tsalle don tashar guda (Px da Mx).

• Kashe Fitar Solenoid (Busashen Tuntuɓa): Cire duka madafunan tsalle don tashar ɗaya (Px da Mx).

3. Tsari Na Musamman (misali, Ikon Gas Valve): Dole ne a bi tsattsauran ra'ayi da zane-zane da zane-zanen sigina a cikin Shafi D. Kada a yi amfani da daidaitattun ƙa'idodin tsalle.

4. Ƙa'idar Kanfigareshan: Koyaushe tabbatar da kowace tashar fitarwa tana da tushen wuta guda ɗaya kawai (ko dai na ciki ta hanyar masu tsalle KO na waje) don guje wa rikice-rikicen wuta da yuwuwar lalacewar kayan aiki.

4.3 Filin Waya

• Haɗa igiyoyi daga masu kunna filin (relay/contactor coils, solenoids, da dai sauransu) zuwa madaidaitan tashoshi na dunƙule akan tsarin DTBC bisa ga zanen injiniya.

• Bambance tsakanin Buɗaɗɗen Al'ada (NO), Rufe Kullum (NC), da na gama gari (COM).

• Don busassun lambobin sadarwa, kuma haɗa wayoyi masu iko da aka kawo mai amfani.

• Waya ya kamata ya kasance amintacce kuma ya bi ka'idodin lantarki na gida da na National Electrical Code (NEC).

5. Yanayin Aikace-aikace na al'ada

Ana amfani da tsarin DS200DTBCG1A ko'ina a fannonin masana'antu daban-daban waɗanda ke buƙatar ingantaccen kulawa mai mahimmanci, musamman a cikin sarrafa injin injin gas. Aikace-aikace na yau da kullun sun haɗa da:

1. Kula da Tsarin Man Fetur: Tuki solenoids don bawul ɗin kashe mai na iskar gas, bawul ɗin rabon tasha, bawul ɗin sharewa, da sauransu.

2. Lube & Na'ura mai aiki da karfin ruwa Tsare-tsaren: Sarrafa masu tuntuɓar don famfo mai lube, na'ura mai aiki da karfin ruwa famfo mai.

3. Tsare-tsare na sanyaya & iska: Magoya bayan sanyaya masu aiki, masu kunna wuta.

4. Tsarin ƙonewa: Samar da ikon sarrafa wutar lantarki don manyan masu kunna wuta (yawanci ta amfani da tashoshin fitarwa na AC).

5. Tsarin Kayan Aiki: Sarrafa jerin farawa / dakatarwa na kayan aikin taimako a kowane lokaci na farawa / rufewa, irin su compressors na iska, famfo mai wankewa.

6. Kariya & Haɗin kai: Aiwatar da umarnin tafiya daga tsarin karewa zuwa saurin rufe bawuloli masu mahimmanci.

A cikin aikace-aikace kamar LM6000 aeroderivative gas turbine, DS200DTBC module (musamman sigar da aka tsara ta musamman a cikin core) yana da mahimmanci don aiwatar da hadaddun ayyuka na aminci kamar tsabtace da yawa na iskar gas da kariyar haɗakarwa mai ƙarfi.

6. Maintenance, Diagnostics & Shirya matsala

6.1 Kulawa na yau da kullun

• Lokaci-lokaci duba tasha sukurori don matsewa.

• Kiyaye samfurin da yankin da ke kewaye da tsabta kuma ba tare da tara ƙura ba.

• Kafin aiwatar da kowane kulawa, koyaushe bi hanyoyin aminci: kashe wutar lantarki kuma tabbatar da rashin ƙarfin lantarki mai haɗari.

6.2 Abubuwan Ganewa

• Binciken tsarin sarrafawa na iya sa ido kan halin tuƙi na coils na hukumar TCRA.

• Ana iya kallon ma'anar ma'ana ta wuraren fitarwa ta hanyar allon bincike (DIAGC) akan ƙirar mai aiki (HMI).

• Don tashoshi da aka saita azaman abubuwan fitarwa na solenoid, tsarin na iya yin ƙayyadaddun bincike, kamar sa ido na yanzu.

6.3 Laifi gama gari & Shirya matsala

1. Wurin Fitar da Ba Ya Kunnawa:

• Bincika idan dabarar CSP ta ba da umarnin.

• Tabbatar da ma'anar ma'anar ma'anar fitarwa shine ' GASKIYA ' akan HMI.

• Bincika idan hasken mai nuna alama (idan akwai) don madaidaicin relay akan allon TCRA ya haskaka.

• Yi amfani da multimeter don aunawa a tashoshin DTBC: don busassun lambobin sadarwa, duba ci gaba da tuntuɓar sadarwa; don lambobin sadarwa masu ƙarfi, bincika fitarwar ƙarfin lantarki.

• Tabbatar da saitin jumper hardware daidai ne (tushen kuskure gama gari).

2. Ƙarfin Fitar da Solenoid Mara Kyau:

• Bincika idan fuse daidai a cikin core yana busa.

• Bincika amincin wutar lantarki daga TCPD zuwa DTBC (J8).

3. Sadarwar Module ko gazawar Hardware: Idan tashoshi da yawa sun gaza lokaci guda, la'akari da kurakuran hukumar TCRA, hukumar TCDA, ko sadarwar IONET. Koma Babi na 8 na littafin jagora don warware matsala na tsari.