SPBRC410 babban aiki ne, mai sarrafa kayan aiki mai ƙarfi a cikin jerin ABB Symphony Plus S+ Control. An ƙera shi don yin hulɗa tare da Harmony block I/O, Harmony rack I/O, da S800 I/O a cikin Tsarin Gudanar da Kasuwancin Symphony da Sarrafa. Mai sarrafawa ya dace da tsarin INFI 90 OPEN a cikin ayyuka, sadarwa, da marufi, yana mai da shi kyakkyawan zaɓi don haɓakawa da haɓaka tsarin INFI 90 na gado.
A matsayin na'urar sarrafawa ta tsaye, SPBRC410 na iya ɗaukar takamaiman sarrafawa da aikace-aikacen sarrafa bayanai ban da ayyuka masu rikitarwa kamar sarrafa madaidaicin madauki, sarrafawar tsari, da sarrafa tsari. Ƙarfin sarrafawarta mai ƙarfi ya isa don aiwatar da aikace-aikacen sarrafa tsari masu buƙata waɗanda ke da ɗimbin bayanai, masu ɗaukar shirye-shirye, ko duka biyun. Mai sarrafawa yana goyan bayan yarukan sarrafawa da yawa, gami da C, Lambobin Aiki (FC), da Batch 90™.
Babban falsafar ƙira na SPBRC410 shine dogaro da babban aiki. Gina-ginen da'ira na sake fasalin sa yana goyan bayan daidaitawar mai sarrafawa (yana buƙatar masu sarrafawa guda biyu), yana ba da damar sauyawa maras sumul zuwa mai sarrafa madadin idan na farko ya gaza, yana haɓaka samuwar tsarin sosai. Bugu da ƙari kuma, mai sarrafawa yana haɗa haɗin haɗin 10/100 Mbps Ethernet yana tallafawa tsarin Modbus TCP, yana ba da damar sadarwa tare da sauran na'urori masu amfani da Ethernet da sauƙaƙe tsarin haɗin kai da samun dama.
Wannan gabatarwar samfurin yana ba da cikakken bayyani na fasalulluka na mai sarrafa SPBRC410, gine-ginen kayan masarufi, ƙayyadaddun fasaha, aikace-aikacen shigarwa, da sabis na tallafi, yana ba da cikakken bayani don zaɓin mai amfani da aikace-aikacen.
2. Mabuɗin Abubuwan Samfur
Gina kan duk fasalulluka na INFI 90 OPEN masu sarrafa kayan aikin multifunction, SPBRC410 yana ƙara haɓaka haɓaka da yawa:
Core Processing High-Performance: Yana amfani da 32-bit ColdFire microprocessor mai gudana a 160 MHz, haɗe tare da ƙira mai faɗin 32-bit, yana ba da aikin sarrafawa na musamman wanda zai iya maye gurbin manyan manyan firammomi na waje ko ƙananan kwamfutoci.
Tallafin Bus na Sadarwa na Dual: Zai iya kunna bas ɗin Hnet a lokaci guda da sadarwar bas mai faɗaɗa I/O, yana ba da damar tallafi ga duka I/O block I/O da masu jituwa rack I/O don sassauƙan I/O gine.
Haɗe-haɗen Ayyukan Ethernet: Yana da fasalin keɓaɓɓiyar keɓaɓɓiyar kewayon 10/100 Mbps Ethernet don sadarwa tare da tsarin mafi girma, sauran masu sarrafawa, ko na'urori masu hankali ta hanyar Modbus TCP yarjejeniya. Yana buƙatar software mai amfani da Ƙofar Harmony.
Aiki mai ƙarfi mai ƙarfi: Yana goyan bayan haɗawa tare da wani mai sarrafa BRC-410 ko BRC-400 don sakewa. Ana samun aiki tare na ainihin-lokaci da kuma canja wurin dabarun sarrafawa da bayanai mara nauyi ta hanyar kebul na jan aiki na gaba-gaba.
Babban Tsarin Ƙwaƙwalwar Ƙwaƙwalwa:
DRAM: 8 MB, yana ba da isasshen ajiya na wucin gadi da sararin kwafin tsarin tsarin.
NVRAM: 2 MB, ana amfani dashi don adana tsarin tsarin sarrafawa ( dabarun FC), Batch 90, C, da fayilolin aikace-aikacen UDF. Ana adana bayanai bayan asarar wuta.
Flash ROM: 2 MB, yana adana umarnin tsarin aiki na microprocessor da ɗakin karatu na FC.
High-Capacity Control Configuration: Capable of supporting configurations of up to 32,000 function blocks and 2,000 Batch 90, C program, and data files.
Binciken kan layi da Kulawa: Yana goyan bayan binciken bas ɗin sadarwar Hnet akan layi da keɓewar kuskure. Ya ƙunshi ɗimbin hanyoyin bincike na yau da kullun da ake samun dama ta hanyar dipswitches don dacewa da kula da filin.
Haɗin Tasha Mai Sauƙi: Yana goyan bayan haɗin kai har zuwa tashoshin sarrafa analog na 128 IISAC01 (40-kbaud) ko dai ta hanyar Hnet zuwa Ikon Ikon Ikon I/O (CIO-100/110) ko kai tsaye ta Ƙungiyar Ƙarshe (TU).
Firmware Zazzagewa: Yana goyan bayan sabunta firmware ta kayan aikin Injiniya na S+, sauƙaƙe fasalin haɓakawa da gyare-gyaren lahani.
Daidaituwa da Sauyawa: Mai jituwa tare da tsarin INFI 90 OPEN ɗin da ke wanzu kuma yana ba da madaidaicin matrix mai maye gurbin mai sarrafawa (duba jagorar jagora 1-1), sauƙaƙe haɓakar tsarin da maye gurbin sashe.
3. Bayanin Hardware
3.1 Faceplate
Fuskar mai sarrafawa tana auna 35.56 mm faɗi da 177.80 mm tsayi. An kiyaye shi a cikin Module Mounting Unit (MMU) ta skru guda biyu a sama da kasa. Tagan bayyane yana bayyana:
8 Red Group A LEDs: Nuni lambobin kuskure, matsayi na farko/majiya, da bayanan bincike.
8 Green Group B LEDs: Nuna fasfo/ ƙididdiga gazawa a yanayin bincike.
1 Ja/Kore Matsayin LED: Yana Nuna yanayin aiki mai sarrafawa (Kashe, Green Green, Koren walƙiya, Ja mai ƙarfi).
Tsaya/Sake saitin Pushbutton: Ana samun dama ta hanyar ƙaramin rami, ana amfani da shi don tsayawa cikin tsari ko sake saita mai sarrafawa.
Fuskar fuska tana ba da kariya ta jiki, kullewa, da haɓaka kwararar iska mai kyau a cikin shingen.
3.2 Hukumar da'ira da Mahimman Abubuwan Mahimmanci
Hukumar da'ira tana amfani da fasaha na ci gaba da hawa sama kuma tana haɗa abubuwa masu zuwa:
Microprocessor: 32-bit ColdFire, 160 MHz.
Ƙwaƙwalwar ajiya: 2 MB Flash ROM, 8 MB DRAM, 2 MB NVRAM (na BRC-410).
Aikace-aikace-Takamaiman Haɗaɗɗen Da'irori (ASICs): Haɗa da'irar Ƙwaƙwalwar Ƙwaƙwalwar Kai tsaye (DMA), da'irorin bas na al'ada na ABB (don Matsala, Hnet, bas ɗin faɗaɗa I/O), da'irori redundancy, da sauransu.
Hanyoyin Sadarwa:
Module Module Module Model.
Hnet interface (yana buƙatar haɗi ta hanyar Adaftar Bus na Processor - PBA).
I/O mai faɗakarwa na bas.
Tashoshi na taimako guda biyu (RS-232-C/RS-485).
Haɗin tashar tashar IISAC01 ɗaya.
Daya RJ-45 10/100 Mbps Ethernet tashar jiragen ruwa.
Baturi: Yana ba da ikon ajiya don NVRAM don hana asarar bayanan sanyi.
3.3 Adaftar Bus Processor (PBA)
PBA (P/N: P-HC-BRC-PBA20000) abu ne mai mahimmanci wanda ke haɗa mai sarrafawa zuwa tsarin tsarin I/O masu jituwa ta hanyar Hnet. Babban ayyukansa sun haɗa da:
Samar da ayyukan Layer na zahiri na Hnet, ƙarewa, da keɓewa.
Samar da wuraren haɗin kai don bas-bas na Hnet (yana buƙatar PBA biyu).
Haɗa ta hanyar kebul zuwa NTMP01 Ƙarshe Unit (TU) don samun damar zuwa tashar jiragen ruwa na mataimaka biyu da hanyar haɗin tashar.
Girma: 31.08 mm fadi × 93.50 mm tsayi × 130.50 mm tsayi.
4. Yankunan Aikace-aikace
Yin amfani da babban aikin sa, amintacce, da damar sadarwa mai sassauƙa, mai kula da SPBRC410 ya dace da kewayon kewayon sarrafa masana'antu da yawa da yanayin sarrafa tsari:
Ƙarfin Ƙarfafawa: Tsarukan sarrafawa (DCS), tsarin sarrafawa (MCS), da tsarin sarrafawa (SCS) a cikin thermal, hydro, da makamashin nukiliya.
Oil, Gas & Chemicals: Ci gaba da sarrafawa, sarrafa tsari, da tsarin kulle-kullen aminci don tacewa, petrochemical, taki, da hanyoyin samar da sinadarai.
Masana'antar Karfe: Ikon sarrafa kansa don ƙera ƙarfe, ci gaba da simintin gyare-gyare, da tafiyar matakai.
Pulp & Paper: Rarraba tsarin sarrafawa don juzu'i da injin takarda.
Ruwa & Ruwan Shara: Kulawa da Kulawa da Samun Bayanai (SCADA) da sarrafa tsari don manyan magungunan ruwa da tsire-tsire masu kula da ruwa.
Zamantake Tsarin Legacy: Yana aiki azaman mai sarrafa kayan haɓakawa don tsarin INFI 90 ko Network 90, yana kare saka hannun jarin mai amfani yayin haɓaka aikin tsarin da tallafawa ƙa'idodin sadarwa na zamani (misali, Ethernet).
Siffofin sake fasalin sa sun dace musamman don aikace-aikacen sarrafa tsari mai mahimmancin manufa wanda ke buƙatar samun babban tsari mai girma don tabbatar da ci gaba, samarwa mara yankewa.
5. Tallafi da Ayyuka
ABB yana ba da cikakken tallafi da sabis na samfur don tabbatar da ingantaccen aiki na mai sarrafa SPBRC410 a duk tsawon rayuwar sa:
Taimakon Fasaha: ABB da tallace-tallace na gida ko ofisoshin sabis suna ba da taimako tare da aiki da gyara samfur.
Sabis na Kwangila: Shigarwa, gyare-gyare, da sabis na kwangila suna samuwa.
Samar da Kayan Kaya: An ba da lissafin abubuwan da aka ba da shawarar (ciki har da igiyoyi, raka'o'in ƙarewa, batura, da sauransu). Za a iya yin oda sassan ta ofisoshin tallace-tallace na ABB. Littafin ya ƙunshi cikakkun ƙididdiga na ƙididdiga da lambobi.
Ayyukan Horarwa: ABB yana da wuraren horo na zamani kuma yana iya ba da horo na kan-site ko shuka don ma'aikatan abokin ciniki, rufe tsarin tsarin, aiki, da kulawa.
Takaddun shaida: Ana iya samun kwafin wannan jagorar ko wasu umarni masu alaƙa daga ofishin tallace-tallace na ABB mafi kusa akan farashi mai ma'ana.
Kayan aikin Software: Kanfigareshan da shirye-shirye suna buƙatar S+ Engineering: Mawaƙi Harmony kayan aiki (version 5.1 ko kuma daga baya). Ana yin zazzagewar firmware da daidaitawar kan layi ta amfani da wannan kayan aikin.
